Osteogenic tailoring of oriented bone matrix organization using on/off micropatterning for osteoblast adhesion on titanium surfaces

Tadaaki Matsuzaka, Aira Matsugaki, Kazuhiko Ishihara, Takayoshi Nakano

Acta Biomaterialia　2025/01　Research paper (scientific journal)

Novel strengthening mechanism of laser powder bed fusion-manufactured Inconel 718: Effects of customized hierarchical interfaces

Tsuyoshi Mayama, Takuya Ishimoto, Masakazu Tane, Ken Cho, Koki Manabe, Daisuke Miyashita, Shota Higashino, Taichi Kikukawa, Hiroyuki Y. Yasuda, Takayoshi Nakano

Additive Manufacturing　Vol. 93　2024/08/05　Research paper (scientific journal)

Effects of hatch spacing on densification, microstructural and mechanical properties of β-solidifying γ-TiAl alloy fabricated by laser powder bed fusion

Sung Hyun Park, Ozkan Gokcekaya, Myung Hoon Oh, Takayoshi Nakano

Materials Characterization　Vol. 214　2024/08　Research paper (scientific journal)

Design and development of a novel non-equiatomic Ti-Nb-Mo-Ta-W refractory high entropy alloy with a single-phase body-centered cubic structure

Yong Seong Kim, Ryosuke Ozasa, Kazuhisa Sato, Ozkan Gokcekaya, Takayoshi Nakano

Scripta Materialia　Vol. 252　2024/07/11　Research paper (scientific journal)

Local valence analysis of 316L austenitic stainless steel produced by laser powder bed fusion

Kazuhisa Sato, Shunya Takagi, Satoshi Ichikawa, Takuya Ishimoto, Takayoshi Nakano

Materials Letters　Vol. 372　2024/07/06　Research paper (scientific journal)

Tensile deformation behavior of a lightweight AlZnCu medium-entropy alloy

Sujung Son, Taek Soo Kim, Soon Jik Hong, Takayoshi Nakano, Hyoung Seop Kim

Journal of Materials Research and Technology　Vol. 31　p. 2116-2125　2024/07/01　Research paper (scientific journal)

Water-Mediated On-Demand Detachable Solid-State Adhesive of Porous Hydroxyapatite for Internal Organ Retractions.

Masahiro Okada, Shi Chao Xie, Yusuke Kobayashi, Hiroaki Yanagimoto, Daisuke Tsugawa, Masaru Tanaka, Takayoshi Nakano, Takumi Fukumoto, Takuya Matsumoto

Advanced healthcare materials　Vol. 13　No. 19　2024/07　Research paper (scientific journal)

Strong grain size effect on tensile behavior of the body-centered-cubic Ti–30Zr–5Mo alloy with stress-induced α′ martensitic transformation

Chenyang Wu, Xiaoli Zhao, Mengrui Zhang, Hideki Hosoda, Takayoshi Nakano, Mitsuo Niinomi, Nan Jia, Zhiwen Shao, Deliang Zhang

Materials Science and Engineering: A　Vol. 900　2024/05　Research paper (scientific journal)

An investigation over microstructure and HIP processing effects on wear performance of pure chromium parts fabricated by laser powder bed fusion

Asli Gunay Bulutsuz, Buse Gulec, Ozkan Gokcekaya, Johannes Gardstam, Takayoshi Nakano, Hakan Yilmazer

International Journal of Refractory Metals and Hard Materials　Vol. 120　2024/04　Research paper (scientific journal)

Adaptive enhancement of apatite crystal orientation and Young's modulus under elevated load in rat ulnar cortical bone

Jun Wang, Takuya Ishimoto, Tadaaki Matsuzaka, Aira Matsugaki, Ryosuke Ozasa, Takuya Matsumoto, Mikako Hayashi, Hyoung Seop Kim, Takayoshi Nakano

Bone　Vol. 181　2024/04　Research paper (scientific journal)

Development and characterizations of low-modulus Ti–Nb–Cu alloys with enhanced antibacterial activities

Qiang Li, Qizhen Peng, Qi Huang, Mitsuo Niinomi, Takuya Ishimoto, Takayoshi Nakano

Materials Today Communications　Vol. 38　2024/03　Research paper (scientific journal)

Development of an equiatomic octonary TiNbTaZrMoHfWCr super-high-entropy alloy for biomedical applications

Tadaaki Matsuzaka, Akira Hyakubu, Yong Seong Kim, Aira Matsugaki, Takeshi Nagase, Takuya Ishimoto, Ryosuke Ozasa, Hyoung Seop Kim, Tomoji Mizuguchi, Ozkan Gokcekaya, Takayoshi Nakano

Materials Chemistry and Physics　Vol. 316　p. 129120-129120　2024/02　Research paper (scientific journal)

Wire-EDM performance and surface integrity of Inconel 718 with unique microstructural features fabricated by laser powder bed fusion

Ozkan Gokcekaya, Ali Günen, Ferhat Ceritbinmez, Abdollah Bahador, Takayoshi Nakano, Melik Çetin

International Journal of Advanced Manufacturing Technology　Vol. 130　No. 9-10　p. 4513-4528　2024/02　Research paper (scientific journal)

Peculiar microstructural evolution and hardness variation depending on laser powder bed fusion-manufacturing condition in Ti–6Al–2Sn–4Zr–6Mo

Prince Valentine Cobbinah, Sae Matsunaga, Yoshiaki Toda, Ryosuke Ozasa, Masayuki Okugawa, Takuya Ishimoto, Yuheng Liu, Yuichiro Koizumi, Pan Wang, Takayoshi Nakano, Yoko Yamabe-Mitarai

Smart Materials in Manufacturing　Vol. 2　p. 100050-100050　2024　Research paper (scientific journal)

Solute segregation in a rapidly solidified Hastelloy-X Ni-based superalloy during laser powder bed fusion investigated by phase-field and computational thermal-fluid dynamics simulations

Okugawa, M., Saito, K., Yoshima, H., Sawaizumi, K., Nomoto, S., Watanabe, M., Nakano, T., Koizumi, Y.

Additive Manufacturing　Vol. 84　2024　Research paper (scientific journal)

Advances in Metal 3D Printing Technology for Tailored Self-Catalytic Reactor Design

Kim, H.-J., Mori, K., Nakano, T., Yamashita, H.

ChemCatChem　Vol. 16　No. 6　2024　Research paper (scientific journal)

Comparison of in-plane compression of additively manufactured Ti6Al4V 2D auxetic structures: Lattice design, manufacturing speed, and failure mode

Eren, Z., Gokcekaya, O., Balkan, D., Nakano, T., Mecito?lu, Z.

Materials and Design　Vol. 241　2024　Research paper (scientific journal)

Lightweight Fe<inf>47</inf>Mn<inf>25</inf>Al<inf>13</inf>Cr<inf>7</inf>Ni<inf>5</inf>C<inf>3</inf> medium-entropy alloy with enhanced mechanical properties

Gang Hee Gu, Hyeonseok Kwon, Jae Heung Lee, Takayoshi Nakano, Hyoung Seop Kim

Materials Science and Engineering: A　Vol. 890　2024/01　Research paper (scientific journal)

Stability of vacancies in β-type Ti-15Mo-5Zr-3Al alloy fabricated via laser powder bed fusion

Masataka Mizuno, Kazuki Sugita, Kousuke Do, Takuya Ishimoto, Takayoshi Nakano, Hideki Araki

Additive Manufacturing Letters　Vol. 7　2023/12　Research paper (scientific journal)

Strong yet strain-hardenable equiatomic CoCrFeMnNi high-entropy alloys by dynamic heterostructuring

Jungwan Lee, Hyojin Park, Sujung Son, Takayoshi Nakano, Hyoung Seop Kim

Journal of Alloys and Compounds　Vol. 965　2023/11/25　Research paper (scientific journal)

Surface Chemical Engineering of a Metal 3D-Printed Flow Reactor Using a Metal-Organic Framework for Liquid-Phase Catalytic H<inf>2</inf> Production from Hydrogen Storage Materials

Kohsuke Mori, Tatsuya Fujita, Hiroto Hata, Hyo Jin Kim, Takayoshi Nakano, Hiromi Yamashita

ACS Applied Materials and Interfaces　Vol. 15　No. 44　p. 51079-51088　2023/11/08　Research paper (scientific journal)

In-plane quasi-static compression deformation of Ti6Al4V double arrow-headed lattice structures fabricated by electron beam powder bed fusion process: Build orientation, scan speed and failure mechanism

Zana Eren, Ozkan Gokcekaya, Takayoshi Nakano, Zahit Mecitoğlu

Journal of Materials Research and Technology　Vol. 27　p. 6192-6210　2023/11/01　Research paper (scientific journal)

Tailoring the crystallographic texture of biomedical metastable β-type Ti-alloy produced via laser powder bed fusion using temperature-field simulations

Takuya Ishimoto, Ryoya Suganuma, Takayoshi Nakano

Materials Letters　Vol. 349　2023/10/15　Research paper (scientific journal)

Effect of O addition on microstructure and mechanical properties of Ti-Nb alloys with various β stability

Qiang Li, Yan Liu, Huanhuan Yu, Masaaki Nakai, Mitsuo Niinomi, Kenta Yamanaka, Akihiko Chiba, Takuya Ishimoto, Takayoshi Nakano

Vacuum　Vol. 215　2023/09　Research paper (scientific journal)

A strategy to regulate the yield ratio of a metastable high Zr-containing β titanium alloy: Synergistic effects of the β domain, β stability and β/α interfaces by varying the α phase content

Xiaoli Zhao, Rongxin Zhu, Wenke Song, Lei Meng, Mitsuo Niinomi, Takayoshi Nakano, Nan Jia, Deliang Zhang

Journal of Alloys and Compounds　Vol. 952　2023/08/15　Research paper (scientific journal)

Influence of precursor deficiency sites for borate incorporation on the structural and biological properties of boronated hydroxyapatite

Ozkan Gokcekaya, Celaletdin Ergun, Thomas J. Webster, Takayoshi Nakano

Ceramics International　Vol. 49　No. 5　p. 7506-7514　2023/03/01　Research paper (scientific journal)

Microstructure and Crystallographic Texture Evolution of β-Solidifying γ-TiAl Alloy During Single- and Multi-track Exposure via Laser Powder Bed Fusion

Park, S.-H., Gokcekaya, O., Ozasa, R., Oh, M.-H., Kim, Y.-W., Kim, H.S., Nakano, T.

Metals and Materials International　Vol. 30　No. 5　p. 1227-1241　2023　Research paper (scientific journal)

Host bone microstructure for enhanced resistance to bacterial infections

Ryota Watanabe, Aira Matsugaki, Ozkan Gokcekaya, Ryosuke Ozasa, Takuya Matsumoto, Hiroyuki Takahashi, Hidekazu Yasui, Takayoshi Nakano

Biomaterials Advances　Vol. 154　2023　Research paper (scientific journal)

Deterioration of apatite orientation in the cholecystokinin B receptor gene (Cckbr)-deficient mouse femurs

Yuki Mihara, Takuya Ishimoto, Ryosuke Ozasa, Takao Omura, Yu Yamato, Tomohiro Yamada, Ayako Okamoto, Yukihiro Matsuyama, Takayoshi Nakano

Journal of Bone and Mineral Metabolism　Vol. 41　No. 6　p. 752-759　2023　Research paper (scientific journal)

Variation and process of life history evolution in insular dwarfism as revealed by a natural experiment

Shoji Hayashi, Mugino O. Kubo, Marcelo R. Sánchez-Villagra, Hiroyuki Taruno, Masako Izawa, Tsunehiro Shiroma, Takayoshi Nakano, Masaki Fujita

Frontiers in Earth Science　Vol. 11　2023　Research paper (scientific journal)

Impact of gas flow direction on the crystallographic texture evolution in laser beam powder bed fusion

Hiroki Amano, Takuya Ishimoto, Koji Hagihara, Ryoya Suganuma, Keisuke Aiba, Shi Hai Sun, Pan Wang, Takayoshi Nakano

Virtual and Physical Prototyping　Vol. 18　No. 1　2023　Research paper (scientific journal)

Laser Powder Bed Fusion Additive Manufacturing of Recycled Zircaloy-4

Soung Yeoul Ahn, Sang Guk Jeong, Eun Seong Kim, Suk Hoon Kang, Jungho Choe, Joo Young Ryu, Dae Woon Choi, Jin Seok Lee, Jung Wook Cho, Takayoshi Nakano, Hyoung Seop Kim

Metals and Materials International　Vol. 29　No. 9　p. 2760-2766　2023　Research paper (scientific journal)

Novel single crystalline-like non-equiatomic TiZrHfNbTaMo bio-high entropy alloy (BioHEA) developed by laser powder bed fusion

Ozkan Gokcekaya, Takuya Ishimoto, Yuki Nishikawa, Yong Seong Kim, Aira Matsugaki, Ryosuke Ozasa, Markus Weinmann, Christoph Schnitter, Melanie Stenzel, Hyoung Seop Kim, Yoshitsugu Miyabayashi, Takayoshi Nakano

Materials Research Letters　Vol. 11　No. 4　p. 274-280　2023　Research paper (scientific journal)

Improvement of mechanical properties of Co–Cr–W–Ni alloy tube suitable for balloon-expandable stent applications through heat treatment

Shunsei Takeda, Kosuke Ueki, Kyosuke Ueda, Masaaki Nakai, Takayoshi Nakano, Takayuki Narushima

Materials Science and Engineering: A　Vol. 862　p. 144505-144505　2023/01　Research paper (scientific journal)

Innovative design of bone quality-targeted intervertebral spacer: accelerated functional fusion guiding oriented collagen and apatite microstructure without autologous bone graft.

Aira Matsugaki, Manabu Ito, Yoshiya Kobayashi, Tadaaki Matsuzaka, Ryosuke Ozasa, Takuya Ishimoto, Hiroyuki Takahashi, Ryota Watanabe, Takayuki Inoue, Katsuhiko Yokota, Yoshio Nakashima, Takashi Kaito, Seiji Okada, Takao Hanawa, Yukihiro Matsuyama, Morio Matsumoto, Hiroshi Taneichi, Takayoshi Nakano

The spine journal : official journal of the North American Spine Society　Vol. 23　No. 4　p. 609-620　2022/12/17　Research paper (scientific journal)

Manufacturing single crystals of pure nickel via selective laser melting with a flat-top laser beam

Dennis Edgard Jodi, Tomonori Kitashima, Yuichiro Koizumi, Takayoshi Nakano, Makoto Watanabe

Additive Manufacturing Letters　Vol. 3　p. 100066-100066　2022/12　Research paper (scientific journal)

Equiaxed grain formation by intrinsic heterogeneous nucleation via rapid heating and cooling in additive manufacturing of aluminum-silicon hypoeutectic alloy

Masayuki Okugawa, Yuta Ohigashi, Yuya Furishiro, Yuichiro Koizumi, Takayoshi Nakano

Journal of Alloys and Compounds　Vol. 919　p. 165812-165812　2022/10　Research paper (scientific journal)

Excellent strength–ductility balance of Sc-Zr-modified Al–Mg alloy by tuning bimodal microstructure via hatch spacing in laser powder bed fusion

Yusufu Ekubaru, Ozkan Gokcekaya, Takuya Ishimoto, Kazuhisa Sato, Koki Manabe, Pan Wang, Takayoshi Nakano

Materials & Design　Vol. 221　p. 110976-110976　2022/09　Research paper (scientific journal)

Deletion of Tfam in Prx1-Cre expressing limb mesenchyme results in spontaneous bone fractures.

Hiroki Yoshioka, Shingo Komura, Norishige Kuramitsu, Atsushi Goto, Tomoka Hasegawa, Norio Amizuka, Takuya Ishimoto, Ryosuke Ozasa, Takayoshi Nakano, Yuuki Imai, Haruhiko Akiyama

Journal of bone and mineral metabolism　Vol. 40　No. 5　p. 839-852　2022/08/10　Research paper (scientific journal)

Distinct Morphologies of Bone Apatite Clusters in Endochondral and Intramembranous Ossification.

Emilio Satoshi Hara, Noriyuki Nagaoka, Masahiro Okada, Takayoshi Nakano, Takuya Matsumoto

Advanced biology　Vol. 6　No. 11　2022/07/20　Research paper (scientific journal)

Outstanding in vivo mechanical integrity of additively manufactured spinal cages with a novel "honeycomb tree structure" design via guiding bone matrix orientation.

Takuya Ishimoto, Yoshiya Kobayashi, Masahiko Takahata, Manabu Ito, Aira Matsugaki, Hiroyuki Takahashi, Ryota Watanabe, Takayuki Inoue, Tadaaki Matsuzaka, Ryosuke Ozasa, Takao Hanawa, Katsuhiko Yokota, Yoshio Nakashima, Takayoshi Nakano

The spine journal : official journal of the North American Spine Society　Vol. 22　No. 10　p. 1742-1757　2022/06/05　Research paper (scientific journal)

Combination treatment with ibandronate and eldecalcitol prevents osteoporotic bone loss and deterioration of bone quality characterized by nano-arrangement of the collagen/apatite in an ovariectomized aged rat model

Ryosuke Ozasa, Mitsuru Saito, Takuya Ishimoto, Aira Matsugaki, Yoshihiro Matsumoto, Takayoshi Nakano

Bone　Vol. 157　2022/04　Research paper (scientific journal)

Octacalcium phosphate crystals including a higher density dislocation improve its materials osteogenecity

Ryo Hamai, Susumu Sakai, Yukari Shiwaku, Takahisa Anada, Kaori Tsuchiya, Takuya Ishimoto, Takayoshi Nakano, Osamu Suzuki

Applied Materials Today　Vol. 26　2022/03　Research paper (scientific journal)

Bone fragility via degradation of bone quality featured by collagen/apatite micro-arrangement in human rheumatic arthritis

Ryosuke Ozasa, Aira Matsugaki, Takuya Ishimoto, Satoshi Kamura, Hiroto Yoshida, Mayu Magi, Yoshihiro Matsumoto, Koji Sakuraba, Kenjiro Fujimura, Hisaaki Miyahara, Takayoshi Nakano

Bone　Vol. 155　2022/02　Research paper (scientific journal)

Design and development of (Ti, Zr, Hf)-Al based medium entropy alloys and high entropy alloys

Takeshi Nagase, Mitsuharu Todai, Pan Wang, Shi Hai Sun, Takayoshi Nakano

Materials Chemistry and Physics　Vol. 276　2022/01/15　Research paper (scientific journal)

Novel nano-hydroxyapatite coating of additively manufactured three-dimensional porous implants improves bone ingrowth and initial fixation

Ryota Watanabe, Hiroyuki Takahashi, Aira Matsugaki, Toru Uemukai, Yasumichi Kogai, Takashi Imagama, Kiminori Yukata, Takayoshi Nakano, Takashi Sakai

Journal of Biomedical Materials Research - Part B Applied Biomaterials　Vol. 111　No. 2　p. 453-462　2022　Research paper (scientific journal)

Ibandronate Suppresses Changes in Apatite Orientation and Young's Modulus Caused by Estrogen Deficiency in Rat Vertebrae

Takuya Ishimoto, Mitsuru Saito, Ryosuke Ozasa, Yoshihiro Matsumoto, Takayoshi Nakano

Calcified Tissue International　Vol. 110　No. 6　p. 736-745　2022　Research paper (scientific journal)

Single crystalline-like crystallographic texture formation of pure tungsten through laser powder bed fusion

Tsubasa Todo, Takuya Ishimoto, Ozkan Gokcekaya, Jongyeong Oh, Takayoshi Nakano

Scripta Materialia　Vol. 206　p. 114252-114252　2022/01/01　Research paper (scientific journal)

Effect of a helium gas atmosphere on the mechanical properties of Ti-6Al-4V alloy built with laser powder bed fusion: A comparative study with argon gas

Hiroki Amano, Takuya Ishimoto, Ryoya Suganuma, Keisuke Aiba, Shi Hai Sun, Ryosuke Ozasa, Takayoshi Nakano

Additive Manufacturing　Vol. 48　2021/12　Research paper (scientific journal)

Influence of powder characteristics on densification via crystallographic texture formation: Pure tungsten prepared by laser powder bed fusion

Gokcekaya, O., Ishimoto, T., Todo, T., Wang, P., Nakano, T.

Additive Manufacturing Letters　Vol. 1　p. 100016-100016　2021/12　Research paper (scientific journal)

Control of osteoblast arrangement by osteocyte mechanoresponse through prostaglandin E2 signaling under oscillatory fluid flow stimuli

Tadaaki Matsuzaka, Aira Matsugaki, Takayoshi Nakano

Biomaterials　Vol. 279　p. 121203-121203　2021/12　Research paper (scientific journal)

Quantitative estimation of kink-band strengthening in an Mg–Zn–Y single crystal with LPSO nanoplates

Koji Hagihara, Ryohei Ueyama, Toko Tokunaga, Michiaki Yamasaki, Yoshihito Kawamura, Takayoshi Nakano

Materials Research Letters　Vol. 9　No. 11　p. 467-474　2021/11/02　Research paper (scientific journal)

Comparison of microstructure, crystallographic texture, and mechanical properties in Ti–15Mo–5Zr–3Al alloys fabricated via electron and laser beam powder bed fusion technologies

Shi Hai Sun, Koji Hagihara, Takuya Ishimoto, Ryoya Suganuma, Yun Fei Xue, Takayoshi Nakano

Additive Manufacturing　Vol. 47　2021/11　Research paper (scientific journal)

Surface residual stress and phase stability in unstable β-type Ti–15Mo–5Zr–3Al alloy manufactured by laser and electron beam powder bed fusion technologies

Aya Takase, Takuya Ishimoto, Ryoya Suganuma, Takayoshi Nakano

Additive Manufacturing　Vol. 47　2021/11　Research paper (scientific journal)

Factor which governs the feature of texture developed during additive manufacturing; clarified from the study on hexagonal C40-NbSi<inf>2</inf>

Koji Hagihara, Takuya Ishimoto, Masahiro Suzuki, Ryosuke Ozasa, Aira Matsugaki, Pan Wang, Takayoshi Nakano

Scripta Materialia　Vol. 203　2021/10　Research paper (scientific journal)

Peculiar microstructural evolution and tensile properties of β-containing γ-TiAl alloys fabricated by electron beam melting

Ken Cho, Hajime Kawabata, Tatsuhiro Hayashi, Hiroyuki Y. Yasuda, Hirotoyo Nakashima, Masao Takeyama, Takayoshi Nakano

Additive Manufacturing　Vol. 46　2021/10　Research paper (scientific journal)

Development of Low-Yield Stress Co–Cr–W–Ni Alloy by Adding 6 Mass Pct Mn for Balloon-Expandable Stents

Soh Yanagihara, Kosuke Ueki, Kyosuke Ueda, Masaaki Nakai, Takayoshi Nakano, Takayuki Narushima

Metall. Mater. Trans. A　Vol. 52　No. 9　p. 4137-4145　2021/09　Research paper (scientific journal)

Crystallographic texture- and grain boundary density-independent improvement of corrosion resistance in austenitic 316L stainless steel fabricated via laser powder bed fusion

Yusuke Tsutsumi, Takuya Ishimoto, Tastuya Oishi, Tomoyo Manaka, Peng Chen, Maki Ashida, Kotaro Doi, Hideki Katayama, Takao Hanawa, Takayoshi Nakano

Additive Manufacturing　Vol. 45　2021/09　Research paper (scientific journal)

Orientation dependence of the wear resistance in the Co–Cr–Mo single crystal

Takayoshi Nakano, Koji Hagihara, Ana R. Ribeiro, Yusuke Fujii, Tsubasa Todo, Ryo Fukushima, Luís Augusto Rocha

Wear　Vol. 478-479　2021/08/15　Research paper (scientific journal)

3d puzzle in cube pattern for anisotropic/isotropic mechanical control of structure fabricated bymetal additivemanufacturing

Naoko Ikeo, Hidetsugu Fukuda, Aira Matsugaki, Toru Inoue, Ai Serizawa, Tadaaki Matsuzaka, Takuya Ishimoto, Ryosuke Ozasa, Ozkan Gokcekaya, Takayoshi Nakano

Crystals　Vol. 11　No. 8　2021/08　Research paper (scientific journal)

Stability of crystallographic texture in laser powder bed fusion: Understanding the competition of crystal growth using a single crystalline seed

Takuya Ishimoto, Koji Hagihara, Kenta Hisamoto, Takayoshi Nakano

Additive Manufacturing　Vol. 43　2021/07　Research paper (scientific journal)

Unique crystallographic texture formation in Inconel 718 by laser powder bed fusion and its effect on mechanical anisotropy

Ozkan Gokcekaya, Takuya Ishimoto, Shinya Hibino, Jumpei Yasutomi, Takayuki Narushima, Takayoshi Nakano

Acta Materialia　Vol. 212　2021/06/15　Research paper (scientific journal)

Superior Alignment of Human iPSC-Osteoblasts Associated with Focal Adhesion Formation Stimulated by Oriented Collagen Scaffold

Ryosuke Ozasa, Aira Matsugaki, Tadaaki Matsuzaka, Takuya Ishimoto, Hui-Suk Yun, Takayoshi Nakano

International Journal of Molecular Sciences　Vol. 22　No. 12　p. 6232-6232　2021/06/09　Research paper (scientific journal)

Low magnetic field promotes recombinant human BMP-2-induced bone formation and influences orientation of trabeculae and bone marrow-derived stromal cells

Rintaro Okada, Kai Yamato, Minoru Kawakami, Joe Kodama, Junichi Kushioka, Daisuke Tateiwa, Yuichiro Ukon, Bal Zeynep, Takuya Ishimoto, Takayoshi Nakano, Hideki Yoshikawa, Takashi Kaito

Bone Reports　Vol. 14　2021/06　Research paper (scientific journal)

Surprising increase in yield stress of Mg single crystal using long-period stacking ordered nanoplates

Koji Hagihara, Ryohei Ueyama, Michiaki Yamasaki, Yoshihito Kawamura, Takayoshi Nakano

Acta Materialia　Vol. 209　2021/05/01　Research paper (scientific journal)

Development of orthophosphosilicate glass/poly(lactic acid) composite anisotropic scaffolds for simultaneous reconstruction of bone quality and quantity

Sungho Lee, Fukue Nagata, Katsuya Kato, Toshihiro Kasuga, Takayoshi Nakano

Journal of Biomedical Materials Research - Part A　Vol. 109　No. 5　p. 788-803　2021/05　Research paper (scientific journal)

Design and development of Ti–Zr–Hf–Nb–Ta–Mo high-entropy alloys for metallic biomaterials

Yuuka Iijima, Takeshi Nagase, Aira Matsugaki, Pan Wang, Kei Ameyama, Takayoshi Nakano

Materials and Design　Vol. 202　2021/04　Research paper (scientific journal)

Re-Evaluation of Initial Bone Mineralization from an Engineering Perspective

Emilio Satoshi Hara, Masahiro Okada, Noriyuki Nagaoka, Takayoshi Nakano, Takuya Matsumoto

Tissue Engineering Part B: Reviews　Vol. 28　No. 1　p. 246-255　2021/03/29

Development of TiNbTaZrMo bio-high entropy alloy (BioHEA) super-solid solution by selective laser melting, and its improved mechanical property and biocompatibility

Takuya Ishimoto, Ryosuke Ozasa, Kana Nakano, Markus Weinmann, Christoph Schnitter, Melanie Stenzel, Aira Matsugaki, Takeshi Nagase, Tadaaki Matsuzaka, Mitsuharu Todai, Hyoung Seop Kim, Takayoshi Nakano

Scripta Materialia　Vol. 194　2021/03/15　Research paper (scientific journal)

Erratum to “Overexpression of Fam20C in osteoblast in vivo leads to increased cortical bone formation and osteoclastic bone resorption” [Bone 138 (2020), 115414] (Bone (2020) 138, (S8756328220301940), (10.1016/j.bone.2020.115414))

Katsutoshi Hirose, Takuya Ishimoto, Yu Usami, Sunao Sato, Kaori Oya, Takayoshi Nakano, Toshihisa Komori, Satoru Toyosawa

Bone　Vol. 143　2021/02　Research paper (scientific journal)

Control of Anisotropic Crystallographic Texture in Powder Bed Fusion Additive Manufacturing of Metals and Ceramics—A Review

Hagihara, K., Nakano, T.

JOM　2021　Research paper (scientific journal)

In-air micro-proton-induced X-ray/gamma-ray emission analysis of the acid resistance of root dentin after applying fluoride-containing materials incorporating calcium

Kyoko YAGI, Reo UEMURA, Hiroko YAMAMOTO, Takuya ISHIMOTO, Katsuaki NAITO, Shousaku ITOH, Yasuhiro MATSUDA, Katsushi OKUYAMA, Takayoshi NAKANO, Mikako HAYASHI

Dental Materials Journal　2021　Research paper (scientific journal)

Hypermineralization of Hearing-Related Bones by a Specific Osteoblast Subtype

Yukiko Kuroda, Katsuhiro Kawaai, Naoya Hatano, Yanlin Wu, Hidekazu Takano, Atsushi Momose, Takuya Ishimoto, Takayoshi Nakano, Paul Roschger, Stéphane Blouin, Koichi Matsuo

Journal of Bone and Mineral Research　Vol. 36　No. 8　p. 1535-1547　2021　Research paper (scientific journal)

Quantitative Evaluation of Osteocyte Morphology and Bone Anisotropic Extracellular Matrix in Rat Femur

Takuya Ishimoto, Keita Kawahara, Aira Matsugaki, Hiroshi Kamioka, Takayoshi Nakano

Calcified Tissue International　Vol. 109　No. 4　p. 434-444　2021　Research paper (scientific journal)

Type I Angiotensin II Receptor Blockade Reduces Uremia-Induced Deterioration of Bone Material Properties

Takuya Wakamatsu, Yoshiko Iwasaki, Suguru Yamamoto, Koji Matsuo, Shin Goto, Ichiei Narita, Junichiro J. Kazama, Kennichi Tanaka, Akemi Ito, Ryosuke Ozasa, Takayoshi Nakano, Chisato Miyakoshi, Yoshihiro Onishi, Shingo Fukuma, Shunichi Fukuhara, Hideyuki Yamato, Masafumi Fukagawa, Tadao Akizawa

Journal of Bone and Mineral Research　Vol. 36　No. 1　p. 67-79　2021/01　Research paper (scientific journal)

Ex Vivo Gene Therapy Treats Bone Complications of Mucopolysaccharidosis Type II Mouse Models through Bone Remodeling Reactivation

Miho Wada, Yohta Shimada, Sayoko Iizuka, Natsumi Ishii, Hiromi Hiraki, Toshiaki Tachibana, Kazuhiro Maeda, Mitsuru Saito, Shoutaro Arakawa, Takuya Ishimoto, Takayoshi Nakano, Hiroyuki Ida, Toya Ohashi, Hiroshi Kobayashi

Molecular Therapy - Methods and Clinical Development　Vol. 19　p. 261-274　2020/12/11　Research paper (scientific journal)

Crystallographic orientation control of pure chromium via laser powder bed fusion and improved high temperature oxidation resistance

Ozkan Gokcekaya, Naohiro Hayashi, Takuya Ishimoto, Kyosuke Ueda, Takayuki Narushima, Takayoshi Nakano

Additive Manufacturing　Vol. 36　2020/12　Research paper (scientific journal)

Micro- and nano-bone analyses of the human mandible coronoid process and tendon-bone entheses

Masaaki Kasahara, Satoru Matsunaga, Tomoko Someya, Kei Kitamura, Kento Odaka, Takuya Ishimoto, Takayoshi Nakano, Shinichi Abe, Masayuki Hattori

Journal of Biomedical Materials Research - Part B Applied Biomaterials　Vol. 108　No. 7　p. 2799-2806　2020/10/01　Research paper (scientific journal)

Impaired bone quality characterized by apatite orientation under stress shielding following fixing of a fracture of the radius with a 3D printed Ti-6Al-4V custom-made bone plate in dogs

Keiichiro Mie, Takuya Ishimoto, Mari Okamoto, Yasumasa Iimori, Kazuna Ashida, Karin Yoshizaki, Hidetaka Nishida, Takayoshi Nakano, Hideo Akiyoshi

PLoS ONE　Vol. 15　No. 9 September　2020/09　Research paper (scientific journal)

A Novel Role of Interleukin-6 as a Regulatory Factor of Inflammation-Associated Deterioration in Osteoblast Arrangement

Aira Matsugaki, Shun Matsumoto, Takayoshi Nakano

International Journal of Molecular Sciences　Vol. 21　No. 18　p. 1-11　2020/09　Research paper (scientific journal)

Overexpression of Fam20C in osteoblast in vivo leads to increased cortical bone formation and osteoclastic bone resorption

Katsutoshi Hirose, Takuya Ishimoto, Yu Usami, Sunao Sato, Kaori Oya, Takayoshi Nakano, Toshihisa Komori, Satoru Toyosawa

Bone　Vol. 138　p. 115414-115414　2020/09　Research paper (scientific journal)

Using HAADF-STEM for atomic-scale evaluation of incorporation of antibacterial Ag atoms in a ß-tricalcium phosphate structure

Ozkan Gokcekaya, Kyosuke Ueda, Takayuki Narushima, Takayoshi Nakano

Nanoscale　Vol. 12　No. 31　p. 16596-16604　2020/08/21　Research paper (scientific journal)

Crystallographic orientation control of 316L austenitic stainless steel via selective laser melting

Takuya Ishimoto, Siqi Wu, Yukinobu Ito, Shi Hai Sun, Hiroki Amano, Takayoshi Nakano

ISIJ International　Vol. 60　No. 8　p. 1758-1764　2020/08/15　Research paper (scientific journal)

Microstructure, Mechanical Properties, and Springback of Ti-Nb Alloys Modified by Mo Addition

Qiang Li, Ran Zhang, Junjie Li, Qiang Qi, Xuyan Liu, Masaaki Nakai, Mitsuo Niinomi, Takayoshi Nakano

Journal of Materials Engineering and Performance　Vol. 29　No. 8　p. 5366-5373　2020/08/01　Research paper (scientific journal)

Low Young’s Modulus and High Strength Obtained in Ti-Nb-Zr-Cr Alloys by Optimizing Zr Content

Qiang Li, Chao Cheng, Junjie Li, Ke Zhang, Kai Zhou, Masaaki Nakai, Mitsuo Niinomi, Kenta Yamanaka, Daixiu Wei, Akihiko Chiba, Takayoshi Nakano

Journal of Materials Engineering and Performance　Vol. 29　No. 5　p. 2871-2878　2020/05/01　Research paper (scientific journal)

Titanium as an Instant Adhesive for Biological Soft Tissue

Masahiro Okada, Emilio Satoshi Hara, Atsushi Yabe, Kei Okada, Yo Shibata, Yasuhiro Torii, Takayoshi Nakano, Takuya Matsumoto

Advanced Materials Interfaces　Vol. 7　No. 9　2020/05/01　Research paper (scientific journal)

Osteocalcin is necessary for the alignment of apatite crystallites, but not glucose metabolism, testosterone synthesis, or muscle mass

Takeshi Moriishi, Ryosuke Ozasa, Takuya Ishimoto, Takayoshi Nakano, Tomoka Hasegawa, Toshihiro Miyazaki, Wenguang Liu, Ryo Fukuyama, Yuying Wang, Hisato Komori, Xin Qin, Norio Amizuka, Toshihisa Komori

PLoS Genetics　Vol. 16　No. 5　2020/05　Research paper (scientific journal)

Selective patterning of netrin-1 as a novel guiding cue for anisotropic dendrogenesis in osteocytes

Aira Matsugaki, Daisuke Yamazaki, Takayoshi Nakano

Materials Science and Engineering C　Vol. 108　p. 110391-110391　2020/03　Research paper (scientific journal)

ONO-1301 loaded nanocomposite scaffolds modulate cAMP mediated signaling and induce new bone formation in critical sized bone defect

Shruthy Kuttappan, Jun Ichiro Jo, Deepthy Menon, Takuya Ishimoto, Takayoshi Nakano, Shantikumar V. Nair, Yasuhiko Tabata, Manitha B. Nair

Biomaterials Science　Vol. 8　No. 3　p. 884-896　2020/02/20　Research paper (scientific journal)

Selective Laser Melting

Nakano, T.

Multi-dimensional Additive Manufacturing　2020　Research paper (scientific journal)

Improvement of High Temperature Fatigue Properties of TiAl Alloys Fabricated by Electron Beam Melting Through Hot Isostatic Pressing Process

Ken CHO, Hiroyuki YASUDA, Mitsuharu TODAI, Minoru UEDA, Masao TAKEYAMA, Takayoshi NAKANO

Journal of Smart Processing　Vol. 9　No. 4　p. 180-184　2020　Research paper (scientific journal)

Assessment of the functional efficacy of root canal treatment with high-frequency waves in rats

Matsui, S., Yoneda, N., Maezono, H., Kuremoto, K., Ishimoto, T., Nakano, T.I.D., Yumoto, H., Ebisu, S., Noiri, Y., Hayashi, M.

PLoS ONE　Vol. 15　No. 9 September　2020　Research paper (scientific journal)

3D printing of anisotropic bone-mimetic structure with controlled fluid flow stimuli for osteocytes: Flow orientation determines the elongation of dendrites

Aira Matsugaki, Tadaaki Matsuzaka, Ami Murakami, Pan Wang, Takayoshi Nakano

International Journal of Bioprinting　Vol. 6　No. 4　2020　Research paper (scientific journal)

Effects of unloading by tail suspension on biological apatite crystallite alignment in mouse femur

Kosuke Nakajima, Satoru Matsunaga, Toshiyuki Morioka, Takayoshi Nakano, Shinichi Abe, Yoshitaka Furuya, Yasutomo Yajima

Dental Materials Journal　Vol. 39　No. 4　p. 670-677　2020　Research paper (scientific journal)

Development of Ti–Zr–Hf–Y–La high-entropy alloys with dual hexagonal-close-packed structure

Nagase, T., Todai, M., Nakano, T.

Scripta Materialia　Vol. 186　p. 242-246　2020　Research paper (scientific journal)

Combined effect of teriparatide and an anti-RANKL monoclonal antibody on bone defect regeneration in mice with glucocorticoid-induced osteoporosis

Etani, Y., Ebina, K., Hirao, M., Kitaguchi, K., Kashii, M., Ishimoto, T., Nakano, T., Okamura, G., Miyama, A., Takami, K., Goshima, A., Kanamoto, T., Nakata, K., Yoshikawa, H.

Bone　Vol. 139　p. 115525-115525　2020　Research paper (scientific journal)

Bone apatite anisotropic structure control: Via designing fibrous scaffolds

Lee, S., Nagata, F., Kato, K., Nakano, T.

RSC Advances　Vol. 10　No. 23　p. 13500-13506　2020　Research paper (scientific journal)

Design and fabrication of Ti–Zr-Hf-Cr-Mo and Ti–Zr-Hf-Co-Cr-Mo high-entropy alloys as metallic biomaterials

Nagase, T., Iijima, Y., Matsugaki, A., Ameyama, K., Nakano, T.

Materials Science and Engineering C　Vol. 107　p. 110322-110322　2020　Research paper (scientific journal)

The combined effects of teriparatide and anti-RANKL monoclonal antibody on bone defect regeneration in ovariectomized mice.

Kazuma Kitaguchi, Masafumi Kashii, Kosuke Ebina, Takashi Kaito, Rintaro Okada, Takahiro Makino, Yuki Etani, Takuya Ishimoto, Takayoshi Nakano, Hideki Yoshikawa

Bone　Vol. 130　p. 115077-115077　2020/01　Research paper (scientific journal)

Radiation-resistant properties of cross-linking PTFE for medical use

Hiroshi Saito, Masakazu Furuta, Aira Matsugaki, Takayoshi Nakano, Masako Oishi, Masayuki Okazaki

Polymer Bulletin　Vol. 76　No. 12　p. 6111-6122　2019/12/01　Research paper (scientific journal)

Development of non-equiatomic Ti-Nb-Ta-Zr-Mo high-entropy alloys for metallic biomaterials

T. Hori, Takeshi Nagase, Mitsuharu Todai, Aira Matsugaki, Takayoshi Nakano

Scripta Materialia　Vol. 172　p. 83-87　2019/11　Research paper (scientific journal)

Quantitative ultrasound (QUS) axial transmission method reflects anisotropy in micro-arrangement of apatite crystallites in human long bones: A study with 3-MHz-frequency ultrasound.

Takuya Ishimoto, Ryoichi Suetoshi, Dorian Cretin, Koji Hagihara, Jun Hashimoto, Akio Kobayashi, Takayoshi Nakano

Bone　Vol. 127　p. 82-90　2019/10　Research paper (scientific journal)

Overcoming the strength-ductility trade-off by the combination of static recrystallization and low-temperature heat-treatment in Co-Cr-W-Ni alloy for stent application

Kosuke Ueki, Soh Yanagihara, Kyosuke Ueda, Masaaki Nakai, Takayoshi Nakano, Takayuki Narushima

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING　Vol. 766　2019/10　Research paper (scientific journal)

Correction to: Effect of Nb Content on Microstructures and Mechanical Properties of Ti-xNb-2Fe Alloys (Journal of Materials Engineering and Performance, (2019), 28, 9, (5501-5508), 10.1007/s11665-019-04250-5)

Qiang Li, Pu Miao, Junjie Li, Meifeng He, Masaaki Nakai, Mitsuo Niinomi, Akihiko Chiba, Takayoshi Nakano, Xuyan Liu, Kai Zhou, Deng Pan

Journal of Materials Engineering and Performance　Vol. 28　No. 9　2019/09/01　Research paper (scientific journal)

Effect of Nb Content on Microstructures and Mechanical Properties of Ti-xNb-2Fe Alloys

Qiang Li, Pu Miao, Junjie Li, Meifeng He, Masaaki Nakai, Mitsuo Niinomi, Akihiko Chiba, Takayoshi Nakano, Xuyan Liu, Kai Zhou, Deng Pan

Journal of Materials Engineering and Performance　Vol. 28　No. 9　p. 5501-5508　2019/09/01　Research paper (scientific journal)

Strengthening of Mg-based long-period stacking ordered (LPSO) phase with deformation kink bands

Hagihara, K., Yamasaki, M., Kawamura, Y., Nakano, T.

Materials Science and Engineering A　Vol. 763　2019/08　Research paper (scientific journal)

Enhancement of plastic anisotropy and drastic increase in yield stress of Mg-Li single crystals by Al-addition followed by quenching

Hagihara, K., Mori, K., Nakano, T.

Scripta Materialia　Vol. 172　p. 93-97　2019/07　Research paper (scientific journal)

Unique arrangement of bone matrix orthogonal to osteoblast alignment controlled by Tspan11-mediated focal adhesion assembly.

Yohei Nakanishi, Aira Matsugaki, Kosuke Kawahara, Takafumi Ninomiya, Hiroshi Sawada, Takayoshi Nakano

Biomaterials　Vol. 209　p. 103-110　2019/07　Research paper (scientific journal)

Development of bifunctional oriented bioactive glass/poly(lactic acid) composite scaffolds to control osteoblast alignment and proliferation.

Sungho Lee, Aira Matsugaki, Toshihiro Kasuga, Takayoshi Nakano

Journal of biomedical materials research. Part A　Vol. 107　No. 5　p. 1031-1041　2019/05　Research paper (scientific journal)

Biomimetic mineralization using matrix vesicle nanofragments.

Yosuke Kunitomi, Emilio Satoshi Hara, Masahiro Okada, Noriyuki Nagaoka, Takuo Kuboki, Takayoshi Nakano, Hiroshi Kamioka, Takuya Matsumoto

Journal of biomedical materials research. Part A　Vol. 107　No. 5　p. 1021-1030　2019/05　Research paper (scientific journal)

Additive manufacturing of dense components in beta‑titanium alloys with crystallographic texture from a mixture of pure metallic element powders

Takeshi Nagase, Takao Hori, Mitsuharu Todai, Shi Hai Sun, Takayoshi Nakano

Materials and Design　Vol. 173　2019/04　Research paper (scientific journal)

Diffusionless isothermal omega transformation in titanium alloys driven by quenched-in compositional fluctuations

Masakazu Tane, Hiroki Nishiyama, Akihiro Umeda, Norihiko L. Okamoto, Koji Inoue, Martin Luckabauer, Yasuyoshi Nagai, Tohru Sekino, Takayoshi Nakano, Tetsu Ichitsubo

PHYSICAL REVIEW MATERIALS　Vol. 3　No. 4　2019/04　Research paper (scientific journal)

Oriented siloxane-containing vaterite/poly(lactic acid) composite scaffolds for controlling osteoblast alignment and proliferation

Lee, S., Kiyokane, Y., Kasuga, T., Nakano, T.

Journal of Asian Ceramic Societies　2019/04　Research paper (scientific journal)

Study on bone quality in the human mandible-Alignment of biological apatite crystallites.

Takehiro Furukawa, Satoru Matsunaga, Toshiyuki Morioka, Takayoshi Nakano, Shinichi Abe, Masao Yoshinari, Yasutomo Yajima

Journal of biomedical materials research. Part B, Applied biomaterials　Vol. 107　No. 3　p. 838-846　2019/04　Research paper (scientific journal)

UVA-activated riboflavin promotes collagen crosslinking to prevent root caries.

R Uemura, J Miura, T Ishimoto, K Yagi, Y Matsuda, M Shimizu, T Nakano, M Hayashi

Scientific reports　Vol. 9　No. 1　p. srep1252-1252　2019/02　Research paper (scientific journal)

Physical and mechanical properties of metallic biomaterials

Nakano, T.

Metals for Biomedical Devices　2019　Research paper (scientific journal)

Development of low-Young’s modulus Ti–Nb-based alloys with Cr addition

Li, Q., Ma, G., Li, J., Niinomi, M., Nakai, M., Koizumi, Y., Wei, D.-X., Kakeshita, T., Nakano, T., Chiba, A., Liu, X., Zhou, K., Pan, D.

Journal of Materials Science　Vol. 54　No. 11　p. 8675-8683　2019/01　Research paper (scientific journal)

Excellent mechanical and corrosion properties of austenitic stainless steel with a unique crystallographic lamellar microstructure via selective laser melting

Shi-Hai Sun, Takuya Ishimoto, Koji Hagihara, Yusuke Tsutsumi, Takao Hanawa, Takayoshi Nakano

Scripta Materialia　Vol. 159　p. 88-93　2019/01　Research paper (scientific journal)

Osteoporosis Changes Collagen/Apatite Orientation and Young's Modulus in Vertebral Cortical Bone of Rat.

Ozasa R, Ishimoto T, Miyabe S, Hashimoto J, Hirao M, Yoshikawa H, Nakano T

Calcified tissue international　Vol. 104　No. 4　p. 449-460　2018/12　Research paper (scientific journal)

Dynamic Collision Behavior Between Osteoblasts and Tumor Cells Regulates the Disordered Arrangement of Collagen Fiber/Apatite Crystals in Metastasized Bone.

Aira Matsugaki, Tatsuki Harada, Yumi Kimura, Aiko Sekita, Takayoshi Nakano

International journal of molecular sciences　Vol. 19　No. 11　2018/11/05　Research paper (scientific journal)

材料学的視点からの骨基質配向性構造の解明ならびに骨配向化促進に向けた骨代替材料の開発

中野貴由, 石本卓也

応用物理　2018/10

Dual release of growth factor from nanocomposite fibrous scaffold promotes vascularisation and bone regeneration in rat critical sized calvarial defect

Kuttappan, S., Mathew, D., Jo, J.-I., Tanaka, R., Menon, D., Ishimoto, T., Nakano, T., Nair, S.V., Nair, M.B., Tabata, Y.

Acta Biomaterialia　Vol. 78　p. 36-47　2018/09　Research paper (scientific journal)

Elastic-modulus enhancement during room-temperature aging in β-Ti alloys

M. Tane, A. Umeda, K. Hagihara, M. Ueda, T. Nakano, T.Sekino, T. Ichitsubo

2018/07　Research paper (other academic)

Microstructural changes during plastic deformation and corrosion properties of biomedical Co-Cr-W-Ni alloy heat-treated at 873 K

Kosuke Ueki, Kyosuke Ueda, Masaaki Nakai, Takayoshi Nakano, Takayuki Narushima

Metallurgical and Materials Transactions A　2018/04　Research paper (scientific journal)

Influence of unique layered microstructure on fatigue properties of Ti-48Al-2Cr-2Nb alloys fabricated by electron beam melting

Ken Cho, Ryota Kobayashi, Jong Yeong Oh, Hiroyuki Y. Yasuda, Mitsuharu Todai, Takayoshi Nakano, Ayako Ikeda, Minoru Ueda, Masao Takeyama

Intermetallics　Vol. 95　p. 1-10　2018/04/01　Research paper (scientific journal)

Trabecular health of vertebrae based on anisotropy in trabecular architecture and collagen/apatite micro-arrangement after implantation of intervertebral fusion cages in the sheep spine

Takuya Ishimoto, Katsuhisa Yamada, Hiroyuki Takahashi, Masahiko Takahata, Manabu Ito, Takao Hanawa, Takayoshi Nakano

Bone　Vol. 108　p. 25-33　2018/03/01　Research paper (scientific journal)

Strain-rate dependence of deformation behavior of LPSO-phases

Koji Hagihara, Zixuan Li, Michiaki Yamasaki, Yoshihito Kawamura, Takayoshi Nakano

Materials Letters　Vol. 214　p. 119-122　2018/03/01　Research paper (scientific journal)

Effect of scanning strategy on texture formation in Ni-25 at.%Mo alloys fabricated by selective laser melting

Shi-Hai Sun, Koji Hagihara, Takayoshi Nakano

Materials and Design　Vol. 140　p. 307-316　2018/02/15　Research paper (scientific journal)

Novel evaluation method of dentin repair by direct pulp capping using high-resolution micro-computed tomography

Motoki Okamoto, Yusuke Takahashi, Shungo Komichi, Manahil Ali, Naomichi Yoneda, Takuya Ishimoto, Takayoshi Nakano, Mikako Hayashi

Clinical Oral Investigations　Vol. 22　p. 1-9　2018/02/12　Research paper (scientific journal)

Construction of human induced pluripotent stem cell-derived oriented bone matrix microstructure by using in vitro engineered anisotropic culture model,

Ryosuke Ozasa, Aira Matsugaki, Yoshihiro Isobe, Taro Saku, Yun Hui-suk, Takayoshi Nakano

Vol. 106　No. 2　p. 360-369　2018/02　Research paper (scientific journal)

Effects of long-term cigarette smoke exposure on bone metabolism, structure, and quality in a mouse model of emphysema

Mamoru Sasaki, Shotaro Chubachi, Naofumi Kameyama, Minako Sato, Mizuha Haraguchi, Masaki Miyazaki, Saeko Takahashi, Takayoshi Nakano, Yukiko Kuroda, Tomoko Betsuyaku, Koichi Matsuo

PLoS ONE　Vol. 13　No. 1　2018/01/01　Research paper (scientific journal)

Chondrocyte burst promotes space for mineral expansion

Emilio Satoshi Hara, Masahiro Okada, Noriyuki Nagaoka, Takako Hattori, Letycia Mary Iida, Takuo Kuboki, Takayoshi Nakano, Takuya Matsumoto

Integrative Biology　2018　Research paper (scientific journal)

Bioinspired Mineralization Using Chondrocyte Membrane Nanofragments

Emilio Satoshi Hara, Masahiro Okada, Noriyuki Nagaoka, Takako Hattori, Takuo Kuboki, Takayoshi Nakano, Takuya Matsumoto

ACS Biomaterials Science &. Engineering　2018/01　Research paper (scientific journal)

Effects of single or combination therapy of teriparatide and anti-RANKL monoclonal antibody on bone defect regeneration in mice

Kazuma Kitaguchi, Masafumi Kashii, Kosuke Ebina, Takashi Kaito, Rintaro Okada, Takahiro Makino, Takaaki Noguchi, Takuya Ishimoto, Takayoshi Nakano, Hideki Yoshikawa

BONE　Vol. 106　p. 1-10　2018/01　Research paper (scientific journal)

Effects of long-term cigarette smoke exposure on bone metabolism, structure, and quality in a mouse model of emphysema

Mamoru Sasaki, Shotaro Chubachi, Naofumi Kameyama, Minako Sato, Mizuha Haraguchi, Masaki Miyazaki, Saeko Takahashi, Takayoshi Nakano, Yukiko Kuroda, Tomoko Betsuyaku, Koichi Matsuo

PLoS ONE　Vol. 13　No. 1　2018/01/01　Research paper (scientific journal)

Effects of mechanical repetitive load on bone quality around implants in rat maxillae

Yusuke Uto, Shinichiro Kuroshima, Takayoshi Nakano, Takuya Ishimoto, Nao Inaba, Yusuke Uchida, Takashi Sawase

PLOS ONE　Vol. 12　No. 12　2017/12　Research paper (scientific journal)

Use of PIXE/PIGE for sequential Ca and F measurements in root carious model

K. Yagi, H. Yamamoto, R. Uemura, Y. Matsuda, K. Okuyama, T. Ishimoto, T. Nakano, M. Hayashi

SCIENTIFIC REPORTS　Vol. 7　2017/10　Research paper (scientific journal)

Co-deteriorations of anisotropic extracellular matrix arrangement and intrinsic mechanical property in c-src deficient osteopetrotic mouse femur

Takuya Ishimoto, Bunji Sato, Jee-Wook Lee, Takayoshi Nakano

Bone　Vol. 103　p. 216-223　2017/10　Research paper (scientific journal)

Plastic deformation mechanisms of biomedical Co-Cr-Mo alloy single crystals with hexagonal close-packed structure

Wataru Kaita, Koji Hagihara, Luis Augusto Rocha, Takayoshi Nakano

SCRIPTA MATERIALIA　Vol. 142　p. 111-115　2017/08　Research paper (scientific journal)

Influences of scanning speed and short-time heat treatment on fundamental properties of Ti-6Al-4V alloy produced by EBM method

Tatsuro Morita, Chika Tsuda, Takayoshi Nakano

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING　Vol. 704　p. 246-251　2017/08　Research paper (scientific journal)

Structure, dissolution behavior, cytocompatibility, and antibacterial activity of silver-containing calcium phosphate invert glasses

Sungho Lee, Takayoshi Nakano, Toshihiro Kasuga

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A　Vol. 105　No. 11　p. 3127-3135　2017/08　Research paper (scientific journal)

Molecular level analysis of mechinical properties of PTFE sterilized by Co-60 γ-ray irradiation for clincal use

M. Furuta, A. Matsugaki, T. Nakano, I. Hirata, K. Kato, T. Oda, M. Sato, M. Okazaki

Radiation Physics and Chemistry　2017/08　Research paper (scientific journal)

Unusual dynamic precipitation softening induced by dislocation glide in biomedical beta-titanium alloys

Koji Hagihara, Takayoshi Nakano, Mitsuharu Todai

SCIENTIFIC REPORTS　Vol. 7　2017/08　Research paper (scientific journal)

Outstanding compressive creep strength in Cr/Ir-codoped (Mo0.85Nb0.15)Si-2 crystals with the unique cross-lamellar microstructure

Koji Hagihara, Takaaki Ikenishi, Haruka Araki, Takayoshi Nakano

SCIENTIFIC REPORTS　Vol. 7　2017/06　Research paper (scientific journal)

Development of a root canal treatment model in the rat

Yoneda N, Noiri Y, Matsui S, Kuremoto K, Maezono H, Ishimoto T, Nakano T, Ebisu S, Hayashi M

Scientific Reports　Vol. 12　No. 7　p. 3315-3315　2017/06　Research paper (scientific journal)

A paradigm shift for bone quality in dentistry: A literature review

Kuroshima Shinichiro, Kaku Masaru, Ishimoto Takuya, Sasaki Muneteru, Nakano Takayoshi, Sawase Takashi

Journal of Prosthodontic Research　Vol. 61　No. 4　p. 353-362　2017/06　Research paper (scientific journal)

Alteration of osteoblast arrangement via direct attack by cancer cells: New insights into bone metastasis

Y.Kimura, A.Matsugaki, A.Sekita, T.Nakano

Scientific Reports　2017/05　Research paper (scientific journal)

Crystallographic orientation of the c-axis of biological apatite as a new index of the quality of subchondral bone in knee joint osteoarthritis

Jee-Wook Lee, Akio Kobayashi, Takayoshi Nakano

JOURNAL OF BONE AND MINERAL METABOLISM　Vol. 35　No. 3　p. 308-314　2017/05　Research paper (scientific journal)

Disruption of collagen/apatite alignment impairs bone mechanical function in osteoblastic metastasis induced by prostate cancer

Aiko Sekita, Aira Matsugaki, Takayoshi Nakano

BONE　Vol. 97　p. 83-93　2017/04　Research paper (scientific journal)

Crystallographic texture control of beta-type Ti-15Mo-5Zr-3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young's modulus

Takuya Ishimoto, Koji Hagihara, Kenta Hisamoto, Shi-Hai Sun, Takayoshi Nakano

SCRIPTA MATERIALIA　Vol. 132　p. 34-38　2017/04　Research paper (scientific journal)

Development of unique cross-lamellar microstructure, resulting in the drastic increase in fracture toughness in Cr/Ir-codoped (Mo0.85Nb0.15)Si-2 crystals

Koji Hagihara, Takaaki Ikenishi, Takayoshi Nakano

SCRIPTA MATERIALIA　Vol. 131　p. 19-23　2017/04　Research paper (scientific journal)

Successful additive manufacturing of MoSi2 including crystallographic texture and shape control

Koji Hagihara, Takayoshi Nakano, Masahiro Suzuki, Takuya Ishimoto, Suyalatu, Shi-Hai Sun

JOURNAL OF ALLOYS AND COMPOUNDS　Vol. 696　p. 67-72　2017/03　Research paper (scientific journal)

特集：創立80周年記念特集「材料科学の変遷と展望～社会からの要求に応えて～」生体組織再生の立場からの生体・福祉材料の変遷と展望

中野貴由

まてりあ　2017/03

Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials

Mitsuharu Todai, Takeshi Nagase, Takao Hori, Aira Matsugaki, Aiko Sekita, Takayoshi Nakano

SCRIPTA MATERIALIA　Vol. 129　p. 65-68　2017/03　Research paper (scientific journal)

Alteration of osteoblast arrangement via direct attack by cancer cells: New insights into bone metastasis

Yumi Kimura, Aira Matsugaki, Aiko Sekita, Takayoshi Nakano

SCIENTIFIC REPORTS　Vol. 7　2017/03　Research paper (scientific journal)

Formation and structural analysis of 15Mgo-15CaO-8P2O5-4SiO2 glass, Journal of Non-Crystaline Solids

Sungho Lee, Takayoshi Nakano, Toshihiro Kasuga

Journal of Non-Crystaline Solids　2017/02　Research paper (scientific journal)

Successful additive manufacturing of MoSi2including crystallographic texture and shape control

Koji Hagihara, Takayoshi Nakano, Masahiro Suzuki, Takuya Ishimoto, Suyalatu, Shi-Hai Sun

Journal of Alloys and Compounds　Vol. 696　p. 67-72　2017　Research paper (scientific journal)

Optimally oriented grooves on dental implants improve bone quality around implants under repetitive mechanical loading

Shinichiro Kuroshima, Takayoshi Nakano, Takuya Ishimoto, Muneteru Sasaki, Maaya Inoue, Munenori Yasutake, Takashi Sawase

ACTA BIOMATERIALIA　Vol. 48　p. 433-444　2017/01　Research paper (scientific journal)

Unloading-Induced Degradation of the Anisotropic Arrangement of Collagen/Apatite in Rat Femurs

Jun Wang, Takuya Ishimoto, Takayoshi Nakano

CALCIFIED TISSUE INTERNATIONAL　Vol. 100　No. 1　p. 87-94　2017/01　Research paper (scientific journal)

Optimally oriented grooves on dental implants improve bone quality around implants under repetitive mechanical loading

Shinichiro Kuroshima, Takayoshi Nakano, Takuya Ishimoto, Muneteru Sasaki, Maaya Inoue, Munenori Yasutake, Takashi Sawase

ACTA BIOMATERIALIA　Vol. 48　p. 433-444　2017/01　Research paper (scientific journal)

Effect of building direction on the microstructure and tensile properties of Ti-48Al-2Cr-2Nb alloy additively manufactured by electron beam melting

M. Todai, T. Nakano, T. Liu, H. Y. Yasuda, K. Hagihara, K. Cho, M. Ueda, M.Takayama

Additive Mannufacturing　2016/10　Research paper (scientific journal)

Crystal-orientation-dependent corrosion behaviour of single crystals of a pure Mg and Mg-Al and Mg-Cu solid solutions

Koji Hagihara, Masayoshi Okubo, Michiaki Yamasaki, Takayoshi Nakano

CORROSION SCIENCE　Vol. 109　p. 68-85　2016/08　Research paper (scientific journal)

Isotropic plasticity of beta-type Ti-29Nb-13Ta-4.6Zr alloy single crystals for the development of single crystalline beta-Ti implants

Koji Hagihara, Takayoshi Nakano, Hideaki Maki, Yukichi Umakoshi, Mitsuo Niinomi

SCIENTIFIC REPORTS　Vol. 6　2016/07　Research paper (scientific journal)

In vitro assessment of a calcium-fluoroaluminosilicate glass-based desensitizer for the prevention of root surface demineralization

Hiroyuki Miyajima, Takuya Ishimoto, Sai Ma, Jihua Chen, Takayoshi Nakano, Satoshi Imazato

DENTAL MATERIALS JOURNAL　Vol. 35　No. 3　p. 399-407　2016/06　Research paper (scientific journal)

Ultra-precision surface treatment of beta-titanium alloy printed using laser and electron beam melting sources

Jibin Boban, Afzaal Ahmed, Ozkan Gokcekaya, Takayoshi Nakano

CIRP Journal of Manufacturing Science and Technology　Vol. 58　p. 1-19　2025/06　Research paper (scientific journal)

Investigating the controlled microstructure features and the corrosion performance of laser beam powder bed fusioned Ti6Al4V alloy

Tohid Rajabi, Hamid Reza Ghorbani, Masoud Atapour, Ozkan Gokcekaya, Takayoshi Nakano

Progress in Additive Manufacturing　Vol. 10　No. 4　p. 2519-2533　2025/04　Research paper (scientific journal)

Raking and Fusing Behaviors during Fabrication of Multiple-layers in Powder Bed Fusion: An integrated discrete Element and computational thermal fluid Dynamics Study

Shuhei Mino, Masayuki Okugawa, Takayoshi Nakano, Yuichiro Koizumi

Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy　Vol. 72　p. S1465-S1469　2025/03/15　Research paper (scientific journal)

Methylglyoxal compromises callus mineralization and impairs fracture healing through suppression of osteoblast terminal differentiation

Tetsuya Seto, Kiminori Yukata, Shunya Tsuji, Yusuke Takeshima, Takeshi Honda, Akihiko Sakamoto, Kenji Takemoto, Hiroki Sakai, Mayu Matsuo, Yurika Sasaki, Mizuki Kaneda, Mikako Yoshimura, Atsushi Mihara, Kazuya Uehara, Aira Matsugaki, Takayoshi Nakano, Koji Harada, Yoshiro Tahara, Keiko Iwaisako, Ryoji Yanai, Norihiko Takeda, Takashi Sakai, Masataka Asagiri

Biochemical and Biophysical Research Communications　Vol. 747　p. 151312-151312　2025/02　Research paper (scientific journal)

Nano-scaled solidification microstructure characteristics in additively manufactured 316L stainless steel

Fei Sun, Yoshitaka Adachi, Kazuhisa Sato, Takuya Ishimoto, Takayoshi Nakano, Yuichiro Koizumi

Nano-scaled solidification microstructure characteristics in additively manufactured 316L stainless steel　2025　Research paper (international conference proceedings)

Recent research and development in the processing, microstructure, and properties of titanium andits alloy

M. Niinomi, T. Narushima, T. Nakano

Mater. Trans.　Vol. 65　No. 12　p. 1600-1611　2024/12　Research paper (scientific journal)

Microstructure Evolution and High-Temperature Mechanical Properties of Ti-6Al-4Nb-4Zr Fabricated by Selective Laser Melting

Tomoki Kuroda, Haruki Masuyama, Yoshiaki Toda, Tetsuya Matsunaga, Tsutomu Ito, Makoto Watanabe, Ryosuke Ozasa, Takuya Ishimoto, Takayoshi Nakano, Masayuki Shimojo, Yoko Yamabe-Mitarai

Journal of the Japan Institute of Metals and Materials　Vol. 88　No. 12　p. 348-356　2024/12/01　Research paper (scientific journal)

Laser additive manufacturing of a carbon-supersaturated β-Ti alloy for biomaterial application

Mingqi Dong, Yu Zhang, Weiwei Zhou, Peng Chen, Zhenxing Zhou, Hiroyasu Kanetaka, Takuya Ishimoto, Yuichiro Koizumi, Takayoshi Nakano, Naoyuki Nomura

Additive Manufacturing Letters　Vol. 11　2024/12　Research paper (scientific journal)

Laser energy-dependent processability of non-equiatomic TiNbMoTaW high-entropy alloy through in-situ alloying of elemental feedstock powders by laser powder bed fusion

Yong Seong Kim, Ozkan Gokcekaya, Aira Matsugaki, Ryosuke Ozasa, Takayoshi Nakano

Materialia　Vol. 38　2024/12　Research paper (scientific journal)

Exploring the Anti-Biofilm Properties of Austenitic Stainless Steel: A Study on Material Surface Characteristics and Biofilm Resistance via Selective Laser Sintering

Hideyuki Kanematsu, Dana M. Barry, Tsunemasa Saiki, Akihiro Hirayama, Akira Otsu, Koichiro Ogata, Akiko Ogawa, Takeshi Kogo, Hirokazu Konishi, Nobumitsu Hirai, Hidekazu Miura, Takayoshi Nakano

Steel Properties &amp; Applications in conjunction with Materials Science &amp; Technology 2024　p. 97-99　2024/10/18　Research paper (international conference proceedings)

Quantitative revealing the solute segregation behavior at melt pool boundary in additively manufactured stainless steel using a novel processing method for precise positioning by HAADF-STEM

Fei Sun, Yoshitaka Adachi, Kazuhisa Sato, Takuya Ishimoto, Takayoshi Nakano, Yuichiro Koizumi

Materials Characterization　p. 114435-114435　2024/10　Research paper (scientific journal)

Fabrication and Process Monitoring of 316L Stainless Steel by Laser Powder Bed Fusion with µ–Helix Scanning Strategy and Narrow Scanning Line Intervals

Yuheng Liu, Kazufumi Nose, Masayuki Okugawa, Yuichiro Koizumi, Takayoshi Nakano

Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals　Vol. 88　No. 9　p. 190-197　2024/09/01　Research paper (scientific journal)

Effect of Scan Speed on Microstructure and Tensile Properties of Ti–48Al–2Cr–2Nb Alloys Fabricated via Additive Manufacturing

Ken Cho, Masahiro Sakata, Hiroyuki Y. Yasuda, Mitsuharu Todai, Minoru Ueda, Masao Takeyama, Takayoshi Nakano

Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals　Vol. 88　No. 9　p. 198-204　2024/09/01　Research paper (scientific journal)

Alloy Design and Solidification Microstructure of Ti-Zr-Hf-Ag-V Multi-Component Alloys with a Dual Bcc Structure

Takeshi Nagase, Mitsuharu Todai, Satoshi Ichikawa, Aira Matsugaki, Takayoshi Nakano

Materials Transactions　Vol. 65　No. 9　p. 1041-1048　2024/09/01　Research paper (scientific journal)

Macro-alignment responses of preosteoblast MC3T3-E1 cells on DCPD-coated β-TCP porous scaffolds: Effect of liquid volume/mass ratio and granular sizes

Ahmed Hafedh Mohammed Mohammed, Khairul Anuar Shariff, Mohamad Hafizi Abu Bakar, Hasmaliza Mohamad, Aira Matsugaki, Takayoshi Nakano, Intan Nirwana

Journal of Materials Research　Vol. 39　No. 14　p. 2036-2050　2024/07/28　Research paper (scientific journal)

Pore size influence in fabricating DCPD-Coated Porous β-TCP granules: compositional, morphological, and functional group perspective

Ahmed Hafedh Mohammed Mohammed, Khairul Anuar Shariff, Mohamad Hafizi Abu Bakar, Hasmaliza Mohamad, Kunio Ishikawa, Aira Matsugaki, Takayoshi Nakano

Journal of the Australian Ceramic Society　Vol. 60　No. 3　p. 859-870　2024/07　Research paper (scientific journal)

The influence of immediate occlusal loading on micro/nano-structure of peri-implant jaw bone in rats.

Hiroaki Yorioka, Yuto Otsu, Ryu Suzuki, Satoru Matsunaga, Takayoshi Nakano, Shinichi Abe, Hodaka Sasaki

International journal of implant dentistry　Vol. 10　No. 1　p. 24-24　2024/05/09　Research paper (scientific journal)

Effect of Laser Scan Speed on Defects and Texture Development of Pure Chromium Metal Fabricated via Powder Bed Fusion-Laser Beam

Yong Seong Kim, Ozkan Gokcekaya, Aira Matsugaki, Takayoshi Nakano

Materials　Vol. 17　No. 9　2024/04　Research paper (scientific journal)

Delineating the Ultra-Low Misorientation between the Dislocation Cellular Structures in Additively Manufactured 316L Stainless Steel

Fei Sun, Yoshitaka Adachi, Kazuhisa Sato, Takuya Ishimoto, Takayoshi Nakano, Yuichiro Koizumi

Materials　Vol. 17　No. 8　2024/04　Research paper (scientific journal)

Preparation and characterizations of antibacterial iodine-containing coatings on pure Ti

Qiang Li, Shuaishuai Li, Hao Sun, Mitsuo Niinomi, Takayoshi Nakano

Journal of the Mechanical Behavior of Biomedical Materials　Vol. 151　2024/03　Research paper (scientific journal)

Preparation and antibacterial activity of Zn coating on pure Ti with enhanced adhesion

Ming Li, Qiang Li, Jiawei Yang, Mitsuo Niinomi, Takayoshi Nakano

Materials Today Communications　Vol. 38　2024/03　Research paper (scientific journal)

Control of crystallographic textures by metal additive manufacturing-A review

Takayoshi Nakano

44TH RISO INTERNATIONAL SYMPOSIUM ON MATERIALS SCIENCE, RISO 2024　Vol. 1310　2024　Research paper (international conference proceedings)

Creep Behavior of Ti-6Al-4Nb-4Zr Fabricated by Powder Bed Fusion Using a Laser Beam

Yoko Yamabe-Mitarai, Takashi Inoue, Tomoki Kuroda, Sae Matsunaga, Yoshiaki Toda, Tetsuya Matsunaga, Tsutomu Ito, Ryosuke Ozasa, Takuya Ishimoto, Takayoshi Nakano

Journal of the Japan Institute of Metals and Materials　Vol. 88　No. 9　p. 163-170　2024　Research paper (scientific journal)

Effect of Cooling Rate on Powder Characteristics and Microstructural Evolution of Gas Atomized β-Solidifying γ-TiAl Alloy Powder

Sung Hyun Park, Ryosuke Ozasa, Ozkan Gokcekaya, Ken Cho, Hiroyuki Y. Yasuda, Myung Hoon Oh, Young Won Kim, Takayoshi Nakano

Materials Transactions　Vol. 65　No. 2　p. 199-204　2024　Research paper (scientific journal)

Improvement of Work-Hardening Behavior of Co-Cr-W-Ni Alloy by Adding Mn/Fe for Balloon-Expandable Stents

Kosuke Ueki, Kyosuke Ueda, Masaaki Nakai, Takayoshi Nakano, Takayuki Narushima

Key Engineering Materials　Vol. 967　p. 115-120　2023/12/05　Research paper (scientific journal)

【長期予後を見据えたインプラント周囲の硬・軟組織の評価法を考える】骨質への理解がもたらすこれからのインプラント治療

黒嶋 伸一郎, 中野 貴由, 澤瀬 隆

日本口腔インプラント学会誌　Vol. 36　No. 4　p. 224-231　2023/12

Microstructure Evolution of Gas-Atomized β-Solidifying γ-TiAl Alloy Powder during Subsequent Heat Treatment

Sung-Hyun Park, Ozkan Gokcekaya, Ryosuke Ozasa, Ken Cho, Hiroyuki Y. Yasuda, Myung-Hoon Oh, Takayoshi Nakano

Crystals　Vol. 13　No. 12　2023/11　Research paper (scientific journal)

Effect of the Correction of Bilateral Differences in Masseter Muscle Functional Pressure on the Mandible of Growing Rats.

Shuhei Mizuno, Satoru Matsunaga, Norio Kasahara, Masaaki Kasahara, Yoshiaki Shimoo, Shinichi Abe, Takayoshi Nakano, Takuya Ishimoto, Atsuhiko Hikita, Kunihiko Nojima, Yasushi Nishii

Journal of functional biomaterials　Vol. 14　No. 8　2023/08/21　Research paper (scientific journal)

Fusion of Ni Plating on CP-Titanium by Electron Beam Single-Track Scanning: Toward a New Approach for Fabricating TiNi Self-Healing Shape Memory Coating

Lei Wang, Masayuki Okugawa, Hirokazu Konishi, Yuheng Liu, Yuichiro Koizumi, Takayoshi Nakano

Materials　Vol. 16　No. 15　2023/08　Research paper (scientific journal)

Alveolar Bone Microstructure Surrounding Orthodontic Anchor Screws with Plasma Surface Treatment in Rats

Keisuke Okawa, Satoru Matsunaga, Norio Kasahara, Masaaki Kasahara, Chie Tachiki, Takayoshi Nakano, Shinichi Abe, Yasushi Nishii

Journal of Functional Biomaterials　Vol. 14　No. 7　p. 356-356　2023/07/07　Research paper (scientific journal)

骨形成因子遺伝子発現プラスミドの歯周組織導入後の細胞動態と歯槽骨形態学的変化について

山本 まりこ[河井], 小笹 良輔, 石本 卓也, 中野 貴由, 柏木 まりな, 山中 茂樹, 中尾 一祐

日本骨代謝学会学術集会プログラム抄録集　Vol. 41回　p. 168-168　2023/07

骨形成因子遺伝子発現プラスミドの歯周組織導入後の細胞動態と歯槽骨形態学的変化について

山本 まりこ[河井], 小笹 良輔, 石本 卓也, 中野 貴由, 柏木 まりな, 山中 茂樹, 中尾 一祐

日本骨代謝学会学術集会プログラム抄録集　Vol. 41回　p. 168-168　2023/07

Antibacterial Cu-Doped HA/TiO<inf>2</inf> Bioactive Ceramic Composite Coating with Enhanced Adhesion on Pure Ti

Jiawei Yang, Qiang Li, Junjie Li, Jinshuai Yang, Ran Zhang, Mitsuo Niinomi, Takayoshi Nakano

Journal of Materials Engineering and Performance　Vol. 32　No. 14　p. 6151-6159　2023/07　Research paper (scientific journal)

Quantitative Threshold Determination of Auditory Brainstem Responses in Mouse Models

Kenji Tanaka, Shuma Ohara, Tadaaki Matsuzaka, Aira Matsugaki, Takuya Ishimoto, Ryosuke Ozasa, Yukiko Kuroda, Koichi Matsuo, Takayoshi Nakano

International Journal of Molecular Sciences　Vol. 24　No. 14　2023/07　Research paper (scientific journal)

Development of Zn–Mg–Ca Biodegradable Dual-Phase Alloys

Koji Hagihara, Shuhei Shakudo, Toko Tokunaga, Takayoshi Nakano

Metals　Vol. 13　No. 6　2023/06　Research paper (scientific journal)

The effects of orthodontic anchor screw inserted into the femur of growth-phase or mature rats -osteoid formation, bone mineral density, collagen fiber bundles, biological apatite crystal orientation.

Tatsuro Nishimura, Satoru Matsunaga, Masaaki Kasahara, Norio Kasahara, Takayoshi Nakano, Takuya Ishimoto, Hitoshi Yamamoto, Shinichi Abe, Yasushi Nishii

Dental materials journal　Vol. 42　No. 4　p. 542-551　2023/05/23　Research paper (scientific journal)

血清中オステオカルシン濃度が骨アパタイト配向性に及ぼす影響

小笹 良輔, 森石 武史, 小守 壽文, 中野 貴由

日本骨形態計測学会雑誌　Vol. 33　No. 1　p. 175-175　2023/05

Design of Titanium Alloys Insensitive to Thermal History for Additive Manufacturing

Masato Ueda, Chang Ting Hsuan, Masahiko Ikeda, Takayoshi Nakano

Crystals　Vol. 13　No. 4　2023/04　Research paper (scientific journal)

Big-volume SliceGAN for improving a synthetic 3D microstructure image of additive-manufactured TYPE 316L steel

Keiya Sugiura, Toshio Ogawa, Yoshitaka Adachi, Fei Sun, Asuka, Suzuki, Akinori Yamanaka, Nobuo Nakada, Takuya Ishimoto, Yuichiro Koizumi, Takayoshi Nakano

Journal of imaging　Vol. 9　No. 5　2023/04　Research paper (scientific journal)

Effect of Scan Speed on Microstructure and Tensile Properties of Ti48Al2Cr2Nb Alloys Fabricated via Additive Manufacturing

Ken Cho, Masahiro Sakata, Hiroyuki Y. Yasuda, Mitsuharu Todai, Minoru Ueda, Masao Takeyama, Takayoshi Nakano

Materials Transactions　Vol. 64　No. 6　p. 1112-1118　2023　Research paper (scientific journal)

Creep Behavior of Ti6Al4Nb4Zr Fabricated by Powder Bed Fusion Using a Laser Beam

Yoko Yamabe-Mitarai, Takashi Inoue, Tomoki Kuroda, Sae Matsunaga, Yoshiaki Toda, Tetsuya Matsunaga, Tsutomu Ito, Ryosuke Ozasa, Takuya Ishimoto, Takayoshi Nakano

Materials Transactions　Vol. 64　No. 6　p. 1175-1182　2023　Research paper (scientific journal)

Robust Self-Catalytic Reactor for CO<inf>2</inf> Methanation Fabricated by Metal 3D Printing and Selective Electrochemical Dissolution

Hyo Jin Kim, Kohsuke Mori, Takayoshi Nakano, Hiromi Yamashita

Advanced Functional Materials　Vol. 33　No. 41　2023　Research paper (scientific journal)

Fabrication and Process Monitoring of 316L Stainless Steel by Laser Powder Bed Fusion with μ-Helix Scanning Strategy and Narrow Scanning Line Intervals

Yuheng Liu, Kazufumi Nose, Masayuki Okugawa, Yuichiro Koizumi, Takayoshi Nakano

Materials Transactions　Vol. 64　No. 6　p. 1135-1142　2023　Research paper (scientific journal)

Special Issue on Recent Research and Development in the Processing, Microstructure, and Properties of Titanium and Its Alloys

Mitsuo Niinomi, Masahiko Ikeda, Yoko Yamabe-Mitarai, Hideki Hosoda, Takuya Ishimoto, Sengo Kobayashi, Takao Hanawa, Takayuki Narushima, Takayoshi Nakano

Materials Transactions　Vol. 64　No. 1　2023　Research paper (scientific journal)

Unified Understanding of Strengthening Mechanisms Acting in Mg/LPSO Two-Phase Extruded Alloys with Varying LPSO Phase Volume Fraction

Koji Hagihara, Toko Tokunaga, Kazuki Yamamoto, Michiaki Yamasaki, Tsuyoshi Mayama, Takumi Shioyama, Yoshihito Kawamura, Takayoshi Nakano

Materials Transactions　Vol. 64　No. 4　p. 720-729　2023　Research paper (scientific journal)

Modulated Structure Formation in Dislocation Cells in 316L Stainless Steel Fabricated by Laser Powder Bed Fusion

Fei Sun, Toshio Ogawa, Yoshitaka Adachi, Kazuhisa Sato, Shunya Takagi, Goro Miyamoto, Asuka Suzuki, Akinori Yamanaka, Nobuo Nakada, Takuya Ishimoto, Takayoshi Nakano, Yuichiro Koizumi

MATERIALS TRANSACTIONS　Vol. 64　No. 6　p. 1143-1149　2023　Research paper (scientific journal)

Influence of Input Energy Density on Morphology of Unique Layered Microstructure of £-TiAl Alloys Fabricated by Electron Beam Powder Bed Fusion⁺¹

Ken Cho, Naohide Morita, Hiromasa Matsuoka, Hiroyuki Y. Yasuda, Mitsuharu Todai, Minoru Ueda, Masao Takeyama, Takayoshi Nakano

Materials Transactions　Vol. 64　No. 1　p. 44-49　2023　Research paper (scientific journal)

Microstructure Evolution and High-Temperature Mechanical Properties of Ti–6Al–4Nb–4Zr Fabricated by Selective Laser Melting

Tomoki Kuroda, Haruki Masuyama, Yoshiaki Toda, Tetsuya Matsunaga, Tsutomu Ito, Makoto Watanabe, Ryosuke Ozasa, Takuya Ishimoto, Takayoshi Nakano, Masayuki Shimojo, Yoko Yamabe-Mitarai

MATERIALS TRANSACTIONS　Vol. 64　No. 1　p. 95-103　2023/01/01　Research paper (scientific journal)

Microstructure and Solute Segregation around the Melt‐Pool Boundary of Orientation‐Controlled 316L Austenitic Stainless Steel Produced by Laser Powder Bed Fusion

Kazuhisa Sato, Shunya Takagi, Satoshi Ichikawa, Takuya Ishimoto, Takayoshi Nakano

Materials　Vol. 16　No. 1　2022/12/26　Research paper (scientific journal)

Fabrication of initial trabecular bone inspired three-dimensional structure with cell membrane nanofragments

Koichi Kadoya, Emilio Satoshi Hara, Masahiro Okada, Yu Yang Jiao, Takayoshi Nakano, Akira Sasaki, Takuya Matsumoto

Regenerative Biomaterials　Vol. 10　2022/11/02　Research paper (scientific journal)

Kink-band formation in the directionally-solidified Mg/LPSO two-phase alloys

Tokunaga, T., Hagihara, K., Yamasaki, M., Mayama, T., Yamamoto, K., Narimoto, H., Kida, T., Kawamura, Y., Nakano, T.

Science and Technology of Advanced Materials　Vol. 23　No. 1　p. 752-766　2022/11　Research paper (scientific journal)

Effects of Scanning Strategy on the Microstructure and Mechanical Properties of Sc-Zr-Modified Al–Mg Alloy Manufactured by Laser Powder Bed Fusion

Yusufu Ekubaru, Ozkan Gokcekaya, Takayoshi Nakano

Crystals　Vol. 12　No. 10　2022/10　Research paper (scientific journal)

Interface characteristics and mechanical behavior of additively manufactured multi-material of stainless steel and Inconel

Man Jae Sagong, Eun Seong Kim, Jeong Min Park, Gangaraju Manogna Karthik, Byeong Joo Lee, Jung Wook Cho, Chong Soo Lee, Takayoshi Nakano, Hyoung Seop Kim

Materials Science and Engineering A　Vol. 847　2022/07/07　Research paper (scientific journal)

A Novel Ex Vivo Bone Culture Model for Regulation of Collagen/Apatite Preferential Orientation by Mechanical Loading

Ryota Watanabe, Aira Matsugaki, Takuya Ishimoto, Ryosuke Ozasa, Takuya Matsumoto, Takayoshi Nakano

International Journal of Molecular Sciences　Vol. 23　No. 13　p. 7423-7423　2022/07/04　Research paper (scientific journal)

Influence of input energy density on morphology of unique layered microstructure of β-TiAl alloys fabricated by electron beam powder bed fusion

Ken Cho, Naohide Morita, Hiromasa Matsuoka, Hiroyuki Y. Yasuda, Mitsuharu Todai, Minoru Ueda, Masao Takeyama, Takayoshi Nakano

Journal of Japan Institute of Light Metals　Vol. 72　No. 6　p. 298-303　2022/06/15　Research paper (scientific journal)

Raking process for Powder Bed Fusion of Ti-6Al-4V alloy Powder Analyzed by Discrete Element Method

Masayuki Okugawa, Yusuke Isono, Yuichiro Koizumi, Takayoshi Nakano

Journal of Japan Institute of Light Metals　Vol. 72　No. 6　p. 291-297　2022/06/15　Research paper (scientific journal)

Effects of Recrystallization on Tensile Anisotropic Properties for IN738LC Fabricated by Laser Powder Bed Fusion

Shinya Hibino, Kazushige Fujimitsu, Makoto Azuma, Takuya Ishimoto, Takayoshi Nakano

Crystals　Vol. 12　No. 6　2022/06　Research paper (scientific journal)

Athermal ω Phase and Lattice Modulation in Binary Zr-Nb Alloys

Mitsuharu Todai, Keisuke Fukunaga, Takayoshi Nakano

Materials　Vol. 15　No. 6　2022/03/02　Research paper (scientific journal)

Improvement of acid resistance of Zn-doped dentin by newly generated chemical bonds

Katsuaki Naito, Yasutaka Kuwahara, Hiroko Yamamoto, Yasuhiro Matsuda, Katsushi Okuyama, Takuya Ishimoto, Takayoshi Nakano, Hiromi Yamashita, Mikako Hayashi

Materials and Design　Vol. 215　2022/03　Research paper (scientific journal)

Microstructure, mechanical properties, and cytotoxicity of low Young’s modulus Ti–Nb–Fe–Sn alloys

Qiang Li, Tengfei Liu, Junjie Li, Chao Cheng, Mitsuo Niinomi, Kenta Yamanaka, Akihiko Chiba, Takayoshi Nakano

Journal of Materials Science　Vol. 57　No. 9　p. 5634-5644　2022/03　Research paper (scientific journal)

Structural Characterization of Ion Nitrided 316L Austenitic Stainless Steel: Influence of Treatment Temperature and Time

Ozkan Gokcekaya, Celaletdin Ergun, Turgut Gulmez, Takayoshi Nakano, Safak Yilmaz

Metals　Vol. 12　No. 2　2022/02　Research paper (scientific journal)

Microstructure and mechanical properties of Ti–Nb–Fe–Zr alloys with high strength and low elastic modulus

Qiang LI, Qi HUANG, Jun jie LI, Qian feng HE, Masaaki NAKAI, Ke ZHANG, Mitsuo NIINOMI, Kenta YAMANAKA, Akihiko CHIBA, Takayoshi NAKANO

Transactions of Nonferrous Metals Society of China (English Edition)　Vol. 32　No. 2　p. 503-512　2022/02　Research paper (scientific journal)

Periodontal Tissue as a Biomaterial for Hard-Tissue Regeneration following bmp-2 Gene Transfer

Mariko Yamamoto Kawai, Ryosuke Ozasa, Takuya Ishimoto, Takayoshi Nakano, Hiromitsu Yamamoto, Marina Kashiwagi, Shigeki Yamanaka, Kazumasa Nakao, Hiroki Maruyama, Kazuhisa Bessho, Kiyoshi Ohura

Materials　Vol. 15　No. 3　2022/02/01　Research paper (scientific journal)

Additive Manufacturing: Materials, Processing, Characterization and Applications

Wang, P., Nakano, T., Bai, J.

Crystals　Vol. 12　No. 5　2022　Research paper (scientific journal)

Additive Manufacturing: Materials, Processing, Characterization and Applications

Wang, P., Nakano, T., Bai, J.

Crystals　Vol. 12　No. 5　2022　Research paper (scientific journal)

Importance of atmospheric gas selection in metal additive manufacturing: Effects on spatter, microstructure, and mechanical properties,金属積層造形法における雰囲気ガス選択の重要性：スパッタ，金属微細組織，力学特性への影響

Amano, H., Ishimoto, T., Nakano, T.

Keikinzoku/Journal of Japan Institute of Light Metals　Vol. 72　No. 5　2022　Research paper (scientific journal)

Raking Process for Powder Bed Fusion of Ti–6Al–4V Alloy Powder Analyzed by Discrete Element Method

Masayuki Okugawa, Yusuke Isono, Yuichiro Koizumi, Takayoshi Nakano

MATERIALS TRANSACTIONS　Vol. 64　No. 1　p. 37-43　2022　Research paper (scientific journal)

Research and development of titanium-containing biomedical high entropy alloys (BioHEAs) utilizing rapid solidification via laser-powder bed fusion

Ryosuke Ozasa, Aira Matsugaki, Takuya Ishimoto, Takayoshi Nakano

Keikinzoku/Journal of Japan Institute of Light Metals　Vol. 72　No. 6　p. 334-338　2022　Research paper (scientific journal)

Metal additive manufacturing of titanium alloys for control of hard tissue compatibility

Aira Matsugaki, Tadaaki Matsuzaka, Takayoshi Nakano

Keikinzoku/Journal of Japan Institute of Light Metals　Vol. 72　No. 6　p. 339-343　2022　Research paper (scientific journal)

Elucidation of the governing factors of crystallographic texture development in metal additive manufacturing processing; focusing on the silicide product fabrication as an example

Koji Hagihara, Takuya Ishimoto, Takayoshi Nakano

Keikinzoku/Journal of Japan Institute of Light Metals　Vol. 72　No. 6　p. 344-349　2022　Research paper (scientific journal)

Antibacterial Properties and Biocompatibility of Hydroxyapatite Coating Doped with Various Cu Contents on Titanium

Qiang Li, Shihong Song, Junjie Li, Jinshuai Yang, Ran Zhang, Mitsuo Niinomi, Takayoshi Nakano

Materials Transactions　Vol. 63　No. 7　p. 1072-1079　2022　Research paper (scientific journal)

Microstructure, Mechanical Properties, and Cytotoxicity of β-Type Ti-Nb-Cr Alloys Designed by Electron Parameter

Qiang Li, Fei Li, Junjie Li, Zhi Gao, Ke Zhang, Mitsuo Niinomi, Takayoshi Nakano

Journal of Materials Engineering and Performance　Vol. 31　No. 6　p. 4624-4630　2022　Research paper (scientific journal)

Evaluation of the Microstructural Characteristics of Bone Surrounding Anchor Screws Placed under a Horizontal Load by Exploring the Orientation of Biological Apatite Crystals and Collagen Fiber Anisotropy

Takaaki Matsumoto, Satoru Matsunaga, Masaaki Kasahara, Norio Kasahara, Takayoshi Nakano, Takuya Ishimoto, Yasushi Nishii

Journal of Hard Tissue Biology　Vol. 31　No. 2　p. 79-86　2022　Research paper (scientific journal)

Structural characteristics of the bone surrounding dental implants placed into the tail-suspended mice

Yuto Otsu, Satoru Matsunaga, Takehiro Furukawa, Kei Kitamura, Masaaki Kasahara, Shinichi Abe, Takayoshi Nakano, Takuya Ishimoto, Yasutomo Yajima

International Journal of Implant Dentistry　Vol. 7　No. 1　2021/12　Research paper (scientific journal)

Fabrication of Ti-Alloy powder/solid composite with uniaxial anisotropy by introducing unidirectional honeycomb structure via electron beam powder bed fusion

Naoko Ikeo, Tatsuya Matsumi, Takuya Ishimoto, Ryosuke Ozasa, Aira Matsugaki, Tadaaki Matsuzaka, Ozkan Gokcekaya, Yorinobu Takigawa, Takayoshi Nakano

Crystals　Vol. 11　No. 9　2021/09　Research paper (scientific journal)

Control of crystallographic texture and mechanical properties of hastelloy-X via laser powder bed fusion

Shinya Hibino, Tsubasa Todo, Takuya Ishimoto, Ozkan Gokcekaya, Yuichiro Koizumi, Kenichiroh Igashira, Takayoshi Nakano

Crystals　Vol. 11　No. 9　2021/09　Research paper (scientific journal)

Authors’ Response to Letter from Professor Birkedal

Takuya Ishimoto, Hiroshi Kamioka, Takayoshi Nakano

Calcified Tissue International　2021/08/10　Research paper (scientific journal)

Authors’ Response to Letter from Professor Birkedal

Takuya Ishimoto, Hiroshi Kamioka, Takayoshi Nakano

Calcified Tissue International　Vol. 110　No. 1　p. 144-145　2021/08/10

Inverse columnar-equiaxed transition (CET) in 304 and 316l stainless steels melt by electron beam for additive manufacturing (AM)

Yuichiro Miyata, Masayuki Okugawa, Yuichiro Koizumi, Takayoshi Nakano

Crystals　Vol. 11　No. 8　2021/08　Research paper (scientific journal)

Reduction of Spatter Generation Using Atmospheric Gas in Laser Powder Bed Fusion of Ti–6Al–4V

Hiroki Amano, Yusuke Yamaguchi, Takuya Ishimoto, Takayoshi Nakano

MATERIALS TRANSACTIONS　Vol. 62　No. 8　p. 1225-1230　2021/08/01　Research paper (scientific journal)

Lattice distortion in selective laser melting (SLM)-manufactured unstable β-type Ti-15Mo-5Zr-3Al alloy analyzed by high-precision X-ray diffractometry

Aya Takase, Takuya Ishimoto, Ryoya Suganuma, Takayoshi Nakano

Scripta Materialia　Vol. 201　2021/08　Research paper (scientific journal)

Antibacterial Cu-doped calcium phosphate coating on pure titanium

Li, Q., Yang, J., Li, J., Zhang, R., Nakai, M., Niinomi, M., Nakano, T.

Materials Transactions　Vol. 62　No. 7　p. 1052-1055　2021/07/01　Research paper (scientific journal)

Comparison of phase characteristics and residual stresses in ti-6al-4v alloy manufactured by laser powder bed fusion (L-pbf) and electron beam powder bed fusion (eb-pbf) techniques

Aya Takase, Takuya Ishimoto, Naotaka Morita, Naoko Ikeo, Takayoshi Nakano

Crystals　Vol. 11　No. 7　2021/07　Research paper (scientific journal)

Improving the tensile properties of additively manufactured β-containing tial alloys via microstructure control focusing on cellular precipitation reaction

Ken Cho, Hirotaka Odo, Keisuke Okamoto, Hiroyuki Y. Yasuda, Hirotoyo Nakashima, Masao Takeyama, Takayoshi Nakano

Crystals　Vol. 11　No. 7　2021/07　Research paper (scientific journal)

Effect of precursor deficiency induced ca/p ratio on antibacterial and osteoblast adhesion properties of ag-incorporated hydroxyapatite: Reducing ag toxicity

Ozkan Gokcekaya, Celaletdin Ergun, Thomas J. Webster, Abdurrahman Bahadir, Kyosuke Ueda, Takayuki Narushima, Takayoshi Nakano

Materials　Vol. 14　No. 12　2021/06/02　Research paper (scientific journal)

Structures and Dissolution Behaviors of Quaternary CaO-SrO-P2O5-TiO2 Glasses

Sungho Lee, Fukue Nagata, Katsuya Kato, Takayoshi Nakano, Toshihiro Kasuga

Materials　Vol. 14　No. 7　p. 1736-1736　2021/04/01　Research paper (scientific journal)

Improvement of mechanical properties by microstructural evolution of biomedical cocrwni alloys with the addition of Mn and Si

Kosuke Ueki, Soh Yanagihara, Kyosuke Ueda, Masaaki Nakai, Takayoshi Nakano, Takayuki Narushima

Materials Transactions　Vol. 62　No. 2　p. 229-238　2021/02/01　Research paper (scientific journal)

Impaired alignment of bone matrix microstructure associated with disorganized osteoblast arrangement in malignant melanoma metastasis

Aira Matsugaki, Yumi Kimura, Ryota Watanabe, Fumihito Nakamura, Ryo Takehana, Takayoshi Nakano

Biomolecules　Vol. 11　No. 2　p. 1-9　2021/02　Research paper (scientific journal)

Micro/nanostructural characteristic changes in the mandibles of rats after injection of botulinum neurotoxin

Gaku Kusaba, Satoru Matsunaga, Kei Kitamura, Masaaki Kasahara, Yoshiaki Shimoo, Shinichi Abe, Takayoshi Nakano, Takuya Ishimoto, Atsuhiko Hikita, Kunihiko Nojima, Yasushi Nishii

Journal of Hard Tissue Biology　Vol. 30　No. 2　p. 183-192　2021　Research paper (scientific journal)

Modified cellular automaton simulation of metal additive manufacturing

Jun Kubo, Yuichiro Koizumi, Takuya Ishimoto, Takayoshi Nakano

Materials Transactions　Vol. 62　No. 6　p. 864-870　2021　Research paper (scientific journal)

Influence of Sintering Temperature on Mechanical Properties of Ti-Nb-Zr-Fe Alloys Prepared by Spark Plasma Sintering

Qiang Li, Hao Sun, Junjie Li, Xufeng Yuan, Masaaki Nakai, Mitsuo Niinomi, Takayoshi Nakano

Journal of Materials Engineering and Performance　Vol. 30　No. 8　p. 5719-5727　2021　Research paper (scientific journal)

Improvement of strength and ductility by combining static recrystallization and unique heat treatment in Co-20Cr-15W-10Ni alloy for stent application

Kosuke Ueki, Soh Yanagihara, Kyosuke Ueda, Masaaki Nakai, Takayoshi Nakano, Takayuki Narushima

Materials Science Forum　Vol. 1016 MSF　p. 1503-1509　2021　Research paper (international conference proceedings)

Modified cellular automaton simulation of metal additive manufacturing

Jun Kubo, Yuichiro Koizumi, Takuya Ishimoto, Takayoshi Nakano

Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals　Vol. 85　No. 3　p. 103-109　2021　Research paper (scientific journal)

Fabrication of Be-Ta Ti alloys without pre-alloyed powders via SLM

Mitsuahru Todai, Takeshi Nagase, Takayoshi Nakano

Materials Science Forum　Vol. 1016 MSF　p. 1797-1801　2021　Research paper (international conference proceedings)

Promoting effect of basic fibroblast growth factor in synovial mesenchymal stem cell-based cartilage regeneration

Gensuke Okamura, Kosuke Ebina, Makoto Hirao, Ryota Chijimatsu, Yasukazu Yonetani, Yuki Etani, Akira Miyama, Kenji Takami, Atsushi Goshima, Hideki Yoshikawa, Takuya Ishimoto, Takayoshi Nakano, Masayuki Hamada, Takashi Kanamoto, Ken Nakata

International Journal of Molecular Sciences　Vol. 22　No. 1　p. 1-16　2021/01/01　Research paper (scientific journal)

Effect of scan length on densification and crystallographic texture formation of pure chromium fabricated by laser powder bed fusion

Ozkan Gokcekaya, Takuya Ishimoto, Tsubasa Todo, Ryoya Suganuma, Ryo Fukushima, Takayuki Narushima, Takayoshi Nakano

Crystals　Vol. 11　No. 1　p. 1-14　2021/01　Research paper (scientific journal)

Micro-Architectural Investigation of Teleost Fish Rib Inducing Pliant Mechanical Property

Yu Yang Jiao, Masahiro Okada, Emilio Hara, Shi Chao Xie, Noriyuki Nagaoka, Takayoshi Nakano, Takuya Matsumoto

Materials　Vol. 13　No. 22　2020/11　Research paper (scientific journal)

Liquid Phase Separation in Ag-Co-Cr-Fe-Mn-Ni, Co Cr-Cu-Fe-Mn-Ni and Co-Cr-Cu-Fe-Mn-Ni-B High Entropy Alloys for Biomedical Application

Takeshi Nagase, Mitsuharu Todai, Takayoshi Nakano

Crystals　Vol. 10　No. 6　p. 1-20　2020/06　Research paper (scientific journal)

骨質指標としての骨基質配向化制御におけるオステオカルシンの役割

中野 貴由, 小笹 良輔, 岡田 正弘, 松本 卓也, 森石 武史, 小守 壽文

日本歯科理工学会誌　Vol. 39　No. Special Issue75　p. 10-10　2020/04

Selective Laser Melting

Nakano, T.

Multi-dimensional Additive Manufacturing　2020　Research paper (scientific journal)

Quantitative relationship between microstructural factors and fatigue life of Ti-5Al-2Sn-2Zr-4Cr-4 Mo (Ti-17) fabricated using a 1500-ton forging simulator

M. Niinomi, T. Akahori, M. Nakai, Y. Koizumi, A. Chiba, T. Nakano, T. Kakeshita, Y. Yamabe-Mitarai, S. Kuroda, N. Motohashi, Y. Itsumi, T. Choda

MATEC Web of Conferences　Vol. 321　p. 11015-11015　2020　Research paper (scientific journal)

Control of crystallographic orientation by metal additive manufacturing process of β-type Ti alloys based on the bone tissue anisotropy

Takayoshi Nakano, Takuya Ishimoto, Aira Matsugaki, Koji Hagihara, Yuichiro Koizumi, Ryosuke Ozasa

MATEC Web of Conferences　Vol. 321　p. 05002-05002　2020　Research paper (scientific journal)

Microstructure and mechanical behavior of Ti25Nb25Zr alloy prepared from pre-alloyed and hydride-mixed elemental powders

Sharma, B., Vajpai, S.K., Kawabata, M., Nakano, T., Ameyama, K.

Materials Transactions　Vol. 61　No. 4　p. 562-566　2020　Research paper (scientific journal)

Development of CoCrMoFeMnW and CoCrMoFeMnWAG high-entropy alloys based on CoCrMo alloys

Nagase, T., Todai, M., Nakano, T.

Materials Transactions　Vol. 61　No. 4　p. 567-576　2020　Research paper (scientific journal)

Control of microstructure and atomic arrangement by laser-type metal additive manufacturing; SIP (1st stage, 2nd stage) projects and METI regional new growth industry creation promotion subsidy project,SIP 第 1 期・SIP 第 2 期・経産省地域新成長産業創出促進事業：レーザ金属Additive Manufacturing による材料組織ならびに原子配列制御

Nakano, T.

Yosetsu Gakkai Shi/Journal of the Japan Welding Society　Vol. 89　No. 1　p. 27-37　2020　Research paper (scientific journal)

Analysis of bone regeneration based on the relationship between the orientations of collagen and apatite in mouse femur

Ozasa, R., Nakatsu, M., Moriguchi, A., Sasaki, K., Ishimoto, T., Okada, M., Matsumoto, T., Nakano, T.

Materials Transactions　Vol. 61　No. 2　p. 381-386　2020　Research paper (scientific journal)

Loading orientation dependence of the formation behavior of deformation kink bands in the Mg-based long-period stacking ordered (LPSO) phase

Hagihara, K., Okamoto, T., Ueyama, R., Yamasaki, M., Kawamura, Y., Nakano, T.

Materials Transactions　Vol. 61　No. 5　p. 1821-1827　2020　Research paper (scientific journal)

レーザ金属Additive Manufacturingによる材料組織ならびに原子配列制御

中野貴由

溶接学会誌　Vol. 89　No. 1　2020/01

生体骨における自己組織化現象と代替材料への応用

松垣あいら, 中野貴由

化学工業　Vol. 170　No. 12　p. 44-49　2019/11

金属3Dプリンタによる特異組織形成と機能発現、 特集「金属3Dプリンタが拓くモノづくり－付加製造の先進技術」

中野貴由

機械技術　Vol. 67　No. 12　p. 21-27　2019/11

医療デバイスへの金属3Dプリンタ技術の適用―形状・組織・原子配列制御―

中野貴由, 石本卓也

ふぇらむ　Vol. 24　No. 11　p. 687-696　2019/11

Influence of Unique Layered Microstructure on Mechanical Properties of TiAl-Based Alloys Prepared by Electron Beam Melting

K. Cho, M. Sakata, J.Y. Oh, H.Y. Yasuda, M. Todai, A. Ikeda, M. Ueda, M. Takeyama, T. Nakano

Proceedings from EPRI’s 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials　2019/10　Research paper (international conference proceedings)

電子ビーム三次元積層造形プロセスにおけるTiAl合金部材の特異な微細組織と力学特性

趙研, 安田弘行, 當代光陽, 上田実, 竹山雅夫, 中野貴由

チタン　Vol. 60　No. 4　p. 50-56　2019/10　Research paper (scientific journal)

骨粗鬆症マウスにおけるテリパラチドと抗RANKL抗体併用による骨再生に対する効果

北口 和真, 柏井 将文, 蛯名 耕介, 海渡 貴司, 岡田 倫太郎, 牧野 孝洋, 惠谷 悠紀, 石本 卓也, 中野 貴由, 吉川 秀樹

日本整形外科学会雑誌　Vol. 93　No. 8　p. S1704-S1704　2019/09

Additive Manufacturing of Titanium Alloys from a Mixture of Pure Metallic Element Powders

T. Nagase, M. Todai, T. Nakano

Journal of Japan Foundry Engineering Society　Vol. 91　No. 9　p. 627-633　2019/09

チタンとチタン合金

中野貴由

特殊鋼　Vol. 68　No. 5　p. 23-26　2019/09

応力による骨のリモデリング～骨の配向性と骨再生を促す表面形態

松垣あいら, 中野貴由

現代化学　2019/07

Crystallographic texture formation of pure tantalum by selective laser melting method

Oh Jong Yeong, Takuya Ishimoto, Shi-Hai Sun, Takayoshi Nakano

スマートプロセス学会誌　2019/07　Research paper (scientific journal)

Preparation of titanium alloy/bioactive glass composite for biomedical applications via selective laser melting

Lee, S., Oh, J.Y., Mukaeyama, S., Sun, S.-H., Nakano, T.

Materials Transactions　Vol. 60　No. 9　2019/07　Research paper (scientific journal)

金属AMにおける形状ならびに組織制御による異方性機能化

石本卓也, 中野貴由

砥粒加工学会誌　2019/07

Additive Manufacturingプロセスによるシリサイド金属間化合物の結晶方位・組織制御

萩原幸司, 石本卓也, 孫世海, 中野貴由

スマートプロセス学会誌　2019/05

Solidification microstructures of the ingots obtained by arc-melting and cold crucible levitation melting in an equiatomic TiNbTaZr medium-entropy alloy and TiNbTaZrX (X = V, Mo, W) high-entropy alloys

Takeshi Nagase, Kiyoshi Mizuuchi, Takayoshi Nakano

Entropy　2019/05　Research paper (scientific journal)

Additive ManufacturingプロセスによるNi基超合金のクリープ特性向上に向けた異方性組織制御

岡田竜太朗, 野村嘉道, 井頭賢一郎, 中野貴由

スマートプロセス学会誌　2019/05　Research paper (scientific journal)

レーザ積層造形における雰囲気中の酸素がスパッタ発生に与える影響

天野宏紀, 佐々木智章, 野村祐司, 石本卓也, 中野貴由

スマートプロセス学会誌　Vol. 8　No. 3　p. 102-105　2019/05　Research paper (scientific journal)

Microstructure and Mechanical Properties of TiAl Alloys Prepared by Additive Manufacturing

Vol. 8　No. 3　p. 78-83　2019/05

チタンならびにチタン合金のAdditive Manufacturingプロセス

中野貴由, 石本卓也

まてりあ　2019/04

表面形状による細胞・骨配向化制御～ナノ配向溝による特異な直交性骨配向化現象～

松垣あいら, 中野貴由

バイオマテリアル－生体材料－　Vol. 37　No. 4　p. 270-271　2019/04

レーザ積層造形法によるβ型Ti-15Mo-5Zr-3Al合金の集合組織形成

石本卓也, 安冨淳平, 杉本昌太, 中野貴由

スマートプロセス学会誌　Vol. 7　No. 6　p. 229-232　2019/03　Research paper (scientific journal)

Development of low-Young’s modulus Ti–Nb-based alloys with Cr addition

Qiang Li, Guanghao Ma, Junjie Li, Mitsuo Niinomi, Masaaki Nakai, Yuichro Koizumi, Dai-Xiu Wei, Tomoyuki Kakeshita, Takayoshi Nakano, Akihiko Chiba, Xuyan Liu, Kai Zhou, Deng Pan

Journal of Materials Science　2019/02　Research paper (scientific journal)

The effect of HIP treatment on the mechanical properties of titanium aluminide additive manufacturing by EBM

D. Kondo, H. Y. Yasuda, T. Nakano, K. Cho, A. Ikeda, M. Ueda, Y Nagamachi

Proceedings of International Conference on Hot Isostatic Pressing 2017　Vol. 10　p. 114-120　2019/02　Research paper (international conference proceedings)

Cr, Ir 共添加によるC40/C11b超高温耐熱複相シリサイドの格子ラメラ組織制御

萩原幸司, 池西貴昭, 中野貴由

日本金属学会誌まてりあ　2019/02

Forefront in biomedical materials Ⅲ: Forefront of additive manufacturing in biological and medical materials

Hisamori, N., Ishimoto, T., Nakano, T.

Zairyo/Journal of the Society of Materials Science, Japan　Vol. 68　No. 10　2019　Research paper (scientific journal)

Micro-and nanostructural characteristics of rat masseter muscle entheses

Arakawa, K., Matsunaga, S., Nojima, K., Nakano, T., Abe, S., Yoshinari, M., Sueishi, K.

Journal of Hard Tissue Biology　Vol. 28　No. 4　2019　Research paper (scientific journal)

Solidification microstructures of the ingots obtained by arc melting and cold crucible levitation melting in TiNbTaZr medium-entropy alloy and TiNbTaZrX (X = V, Mo, W) high-entropy alloys

Nagase, T., Mizuuchi, K., Nakano, T.

Entropy　Vol. 21　No. 5　2019　Research paper (scientific journal)

Forefront in biomedical materials Ⅲ: Forefront of additive manufacturing in biological and medical materials

Hisamori, N., Ishimoto, T., Nakano, T.

Zairyo/Journal of the Society of Materials Science, Japan　Vol. 68　No. 10　2019　Research paper (scientific journal)

Micro-and nanostructural characteristics of rat masseter muscle entheses

Arakawa, K., Matsunaga, S., Nojima, K., Nakano, T., Abe, S., Yoshinari, M., Sueishi, K.

Journal of Hard Tissue Biology　Vol. 28　No. 4　2019　Research paper (scientific journal)

Solidification microstructures of the ingots obtained by arc melting and cold crucible levitation melting in TiNbTaZr medium-entropy alloy and TiNbTaZrX (X = V, Mo, W) high-entropy alloys

Nagase, T., Mizuuchi, K., Nakano, T.

Entropy　Vol. 21　No. 5　2019　Research paper (scientific journal)

Physical and mechanical properties of metallic biomaterials

Nakano, T.

Metals for Biomedical Devices　2019　Research paper (scientific journal)

Effects of Fe on microstructures and mechanical properties of Ti15Nb25Zr(0,2,4,8)Fe alloys prepared by spark plasma sintering

Qiang Li, Xufeng Yuan, Junjie Li, Pan Wang, Masaaki Nakai, Mitsuo Niinomi, Takayoshi Nakano, Akihiko Chiba, Xuyan Liu, Deng Pan

Materials Transactions　Vol. 60　No. 9　p. 1763-1768　2019　Research paper (scientific journal)

Quantitative and qualitative relationship between microstructural factors and fatigue lives under load- And strain-controlled conditions of Ti5Al2Sn2Zr4Cr4Mo (Ti-17) fabricated using a 1500-ton forging simulator

M. Niinomi, T. Akahori, M. Nakai, Y. Koizumi, A. Chiba, T. Nakano, T. Kakeshita, Y. Yamabe-Mitarai, S. Kuroda, N. Motohashi, Y. Itsumi, T. Choda

Materials Transactions　Vol. 60　No. 9　p. 1740-1748　2019　Research paper (scientific journal)

Solidification Microstructure of High Entropy Alloys Composed With 4 Group (Ti, Zr, Hf), 5 Group (V, Nb, Ta), and 6 Group (Cr, Mo, W) Elements

Nagase Takeshi, Mizuuchi Kiyoshi, Todai Mitsuharu, Nakano Takayoshi

Materia Japan　Vol. 58　No. 2　p. 78-78　2019　Research paper (scientific journal)

骨代謝とアパタイト配向性

小笹良輔, 石本卓也, 中野貴由

腎と骨代謝　Vol. 32　No. 1　p. 45-50　2019/01

Effects of Autogenous Bone Graft on Mass and Quality of Trabecular Bone in Ti–6Al–4V Spinal Cage Fabricated with Electron Beam Melting

Hiroyuki Takahashi, Takuya Ishimoto, Takayuki Inoue, Hiroomi Kimura, Keita Uetsuki, Natsuki Okuda, Yohei Nakanishi, Jong Yeong Oh, Manabu Ito, Yoshio Nakashima, Takao Hanawa, Takayoshi Nakano

MATERIALS TRANSACTIONS　Vol. 60　No. 1　p. 144-148　2019/01　Research paper (scientific journal)

Special Issue on Latest Research and Development of Structural and Functional Titanium-Based Materials PREFACE

Takayoshi Nakano, Takayuki Narushima, Takao Hanawa, Masato Ueda, Yoko Yamabe-Mitarai, Tadashi Furuhara, Hideki Hosoda, Mitsuo Niinomi

MATERIALS TRANSACTIONS　Vol. 60　No. 9　p. 1732-1732　2019

Low springback and low Young’s modulus in Ti29Nb13Ta4.6Zr alloy modified by Mo addition

Qiang Li, Qiang Qi, Junjie Li, Masaaki Nakai, Mitsuo Niinomi, Yuichiro Koizumi, Daixiu Wei, Kenta Yamanaka, Takayoshi Nakano, Akihiko Chiba, Xuyan Liu, Deng Pan

Materials Transactions　Vol. 60　No. 9　p. 1755-1762　2019　Research paper (scientific journal)

生体イメージング法による骨髄内血管網の可視化

小笹良輔, 中野貴由

まてりあ (Materia Japan)　Vol. 57　No. 12　p. 598-598　2018/12

Microstructure and Fatigue Properties of TiAl with Unique Layered Microstructure Fabricated by Electron Beam Melting

Ken Cho, Ryota Kobayashi, Takuma Fukuoka, Jong Yeong Oh, Hiroyuki Y. Yasuda, Mitsuharu Todai, Takayoshi Nakano, Ayako Ikeda, Minoru Ueda, Masao Takeyama

Materials Science Forum　Vol. 941　p. 1597-1602　2018/12　Research paper (scientific journal)

Effects of Heat Treatment on Unique Layered Microstructure and Tensile Properties of TiAl Fabricated by Electron Beam Melting

Masahiro Sakata, Jong Yeong Oh, Ken Cho, Hiroyuki Y. Yasuda, Mitsuharu Todai, Takayoshi Nakano, Ayako Ikeda, Minoru Ueda, Masao Takeyama

Materials Science Forum　Vol. 941　p. 1366-1371　2018/12　Research paper (scientific journal)

Fabrication of the beta-titanium alloy rods from a mixture of pure metallic element powders via selected laser melting

Mitsuharu Todai, Takeshi Nagase, Takao Hori, Hiroyuki Motoki, Shi Hai Sun, Koji Hagihara, Takayoshi Nakano

Materials Science Forum　Vol. 941 MSF　p. 1260-1263　2018/12　Research paper (scientific journal)

多種イオンによる根面象牙質のう蝕抑制の検討

内藤 克昭, 八木 香子, 山本 洋子, 松田 康裕, 岩見 行晃, 奥山 克史, 林 美加子, 石本 卓也, 中野 貴由

特定非営利活動法人日本歯科保存学会学術大会プログラムおよび講演抄録集　Vol. 149回　p. 28-28　2018/10

配向化骨の早期形成を目指した新規脊椎ケージの設計・開発

高橋 広幸, 石本 卓也, 小林 佳弥, 伊東 学, 井上 貴之, 中島 義雄, 中野 貴由

臨床バイオメカニクス　2018/10　Research paper (scientific journal)

テリパラチドと抗RANKL抗体併用による骨再生に対する効果 骨粗鬆症モデル

北口 和真, 柏井 将文, 蛯名 耕助, 海渡 貴司, 岡田 倫太郎, 石本 卓也, 中野 貴由, 吉川 秀樹

日本骨粗鬆症学会雑誌　Vol. 4　No. Suppl.1　p. 402-402　2018/09

Phosphate Invert Glasses for Biomedical Applica-tion

Phosphorus Letter　2018/06　Research paper (scientific journal)

C40/C11b超高温耐熱複相シリサイド合金における特異な「cross-lamellar microstructure」の発達

萩原幸司, 池西貴昭, 中野貴由

日本金属学会誌まてりあ　Vol. 57　2018/05

金属積層造形法における形状・組織制御による異方性付与、ミニ特集：「Additive Manufacturing(付加製造)への医療応用への展開と現状」

萩原幸司, 石本卓也, 中野貴由

まてりあ　2018/04

Influence of unique layered microstructure on fatigue properties of Ti-48Al-2Cr-2Nb alloys fabricated by electron beam melting

Ken Cho, Ryota Kobayashi, Jong Yeong Oh, Hiroyuki Y. Yasuda, Mitsuharu Todai, Takayoshi Nakano, Ayako Ikeda, Minoru Ueda, Masao Takeyama

Intermetallics　Vol. 95　p. 1-10　2018/04/01　Research paper (scientific journal)

金属Additive Manufacturingによる形状・材質の制御

中野貴由

JSPS Report of the 123rd Committee on Heat Resisting Materials and Alloys　2018/03　Research paper (conference, symposium, etc.)

金属粉末積層造形法による新規椎体ケージの設計・開発

高橋広幸, 中島義雄, 伊東学, 石本卓也, 中野貴由

粉体および粉末冶金　2018/02

A

Clinical Orthopaedic Surgery　Vol. 53　No. 2　p. 137-144　2018/02　Part of collection (book)

Formation of Peculiar Deformation Bands in Various Anisotropic Materials Including Mg-based Long-Period Stacking Ordered (LPSO) Phase

Hagihara Koji, Nakano Takayoshi, Yamasaki Michiaki, Kawamura Yoshihito

Materia Japan　Vol. 57　No. 12　p. 607-607　2018

Low young's modulus TiNbO with high strength and good plasticity

Qiang Li, Dong Ma, Junjie Li, Mitsuo Niinomi, Masaaki Nakai, Yuichiro Koizumi, Daixiu Wei, Tomoyuki Kakeshita, Takayoshi Nakano, Akihiko Chiba, Kai Zhou, Deng Pan

Materials Transactions　Vol. 59　No. 5　p. 858-860　2018　Research paper (scientific journal)

生体骨の異方性

石本卓也, 中野貴由

バイオマテリアル－生体材料－　2018/01

関西における3Dプリンタ拠点構築と形状・材質制御による造形体の創製

中野貴由

生産と技術　2018/01　Research paper (bulletin of university, research institution)

Chondrocyte burst promotes space for mineral expansion

Emilio Satoshi Hara, Masahiro Okada, Noriyuki Nagaoka, Takako Hattori, Letycia Mary Iida, Takuo Kuboki, Takayoshi Nakano, Takuya Matsumoto

Integrative Biology　Vol. 10　No. 1　p. 57-66　2018　Research paper (scientific journal)

Quantitative Analysis of the Preferential Orientation of Collagen and Elastin Fibers in Blood Vessel with an Imaging Methodology Combined with Birefringence Measurement

Ryosuke Ozasa, Takeru Nagaishi, Daisuke Yamazaki, Aira Matsugaki, Machiko Kanzaki, Toru Kuratani, Eiichi Morii, Yasushi Sakata, Takayoshi Nakano

Journal of the Japan Institute of Metals and Materials　Vol. 82　No. 3　p. 64-69　2018　Research paper (scientific journal)

文献と臨床の橋わたし 荷重環境下で骨質を制御できるインプラントデザイン

黒嶋 伸一郎, 佐々木 宗輝, 中野 貴由, 石本 卓也, 澤瀬 隆

日本歯科評論　Vol. 77　No. 12　p. 139-142　2017/12

金属系材料の3次元積層造形技術の基礎

小泉雄一郎, 千葉晶彦, 野村直之, 中野貴由

まてりあ　2017/12

Functionalization of Biomaterials from the Perspective of Bone Quality

Vol. 68　No. 12　p. 891-897　2017/12

骨基質配向性におけるメカニカルストレスの影響と予測の可能性

中野貴由, 石本卓也

日本整形外科学会雑誌　2017/12　Research paper (scientific journal)

Effects of mechanical repetitive load on bone quality around implants in rat maxillae

Yusuke Uto, Shinichiro Kuroshima, Takayoshi Nakano, Takuya Ishimoto, Nao Inaba, Yusuke Uchida, Takashi Sawase

PLOS ONE　Vol. 12　No. 12　2017/12　Research paper (scientific journal)

文献と臨床の橋わたし インプラント周囲骨組織のBone quality(骨質)と荷重

黒嶋 伸一郎, 佐々木 宗輝, 中野 貴由, 石本 卓也, 澤瀬 隆

日本歯科評論　Vol. 77　No. 11　p. 155-158　2017/11

Design of the Next Generation Metallic Biomaterials

Todai Mitsuharu, Ishimoto Takuya, Matsugaki Aira, Nakano Takayoshi

Materia Japan　Vol. 56　No. 10　p. 584-588　2017/10

異方性コラーゲン基板による若齢マウス由来骨芽細胞配列化制御

小笹良輔, 松垣あいら, 礒部仁博, 佐久太郎, 中野貴由

Vol. 88　No. 10　p. 480-484　2017/10　Research paper (scientific journal)

連載講座（チタンの基礎講座6）チタンのAdditive Manufacturing（付加製造）

中野貴由

軽金属　2017/09

Additive manufacturing for titanium and its alloys

Vol. 67　No. 9　p. 470-480　2017/09

Preferential Arrangement of Mature Osteoblast from Juvenile Mouse Calvariae on the Oriented Collagen Substrate

Ryosuke Ozasa, Aira Matsugaki, Yoshihiro Isobe, Taro Saku, Takayoshi Nakano

JOURNAL OF THE JAPAN INSTITUTE OF METALS　Vol. 81　No. 10　p. 480-484　2017/08　Research paper (scientific journal)

粉末積層造形法による形状と組織制御による異方性付与

中野 貴由, 石本 卓也, 萩原 幸司

J. Jpn. Soc. Powder Metallurgy　2017/06

ヒト歯科インプラント周囲顎骨における構造特性

松永 智, 是澤 和人, 小高 研人, 吉成 正雄, 飯村 忠浩, 山口 朗, 中野 貴由, 阿部 伸一

日本骨形態計測学会雑誌　Vol. 27　No. 1　p. S135-S135　2017/05

微小領域エックス線回折法によるヒト上顎骨のナノ構造特性解明

笠原 正彰, 松永 智, 小高 研人, 石本 卓也, 中野 貴由, 染屋 智子, 田中 健介, 吉成 正雄, 阿部 伸一, 服部 雅之

日本骨形態計測学会雑誌　Vol. 27　No. 1　p. S139-S139　2017/05

1400℃でも使用可能な超高温耐熱材料を開発

萩原幸司, 中野貴由

Ceramics Japan　2017/05

生体用高強度ハイエントロピー合金の開発

中野貴由, 永瀬丈嗣, 當代光陽

BIO INDUSTRY　2017/05

Osaka University Anisotropic Design & AM Research Center

Vol. 83　No. 5　p. 387-390　2017/05

Preparation of orthophosphate MgO–CaO–P2O5–SiO2–Nb2O5 glasses and glass-ceramics

Sungho Lee, Kyosuke Ueda, Takayuki Narushima, Takayoshi Nakano, Toshihiro Kasuga

Vol. 28　No. 1　p. 23-30　2017/03　Research paper (scientific journal)

乳がん溶骨型転移による骨基質配向性低下

関田愛子, 松垣あいら, 中野貴由

日本金属学会誌　2017/03　Research paper (scientific journal)

医用材料による細胞制御に基づく骨配向化誘導

松垣あいら, 中野貴由

高分子論文集(Japanese Journal of Polymer Science and Technology)　2017/02

Directional Control of Mature Osteoblast Derived from Juvenile Mouse Calvariae

Ryosuke Ozasa, Aira Matsugaki, Yoshihiro Isobe, Taro Saku, Takayoshi Nakano

MATERIALS TRANSACTIONS　Vol. 58　No. 6　p. 958-962　2017　Research paper (scientific journal)

異方性の材料科学に基づく骨基質配向化の解明と制御

中野貴由

バイオマテリアル－生体材料－　2017/01

Structural crosstalk between crystallographic anisotropy in bone tissue and vascular network analyzed with a novel visualization method

Aiko Sekita, Aira Matsugaki, Takayoshi Nakano

Materials Transactions　2017/01　Research paper (scientific journal)

High-temperature deformation behavior of (Mo0.85Nb0.15)Si2 crystals with C40/C11b lamellar microstructure

Koji Hagihara, Haruka Araki, Takaaki Ikenishi, Takayoshi Nakano

Materials Science Forum　Vol. 879　p. 677-683　2017　Research paper (international conference proceedings)

Association between Intraosseous Vasculature and Bone Matrix Anisotropy Analyzed with a Novel Visualization Method

Aiko Sekita, Aira Matsugaki, Ryosuke Ozasa, Takayoshi Nakano

JOURNAL OF THE JAPAN INSTITUTE OF METALS　Vol. 81　No. 6　p. 315-319　2017　Research paper (scientific journal)

Directional Control of Mature Osteoblast Derived from Juvenile Mouse Calvariae

Ryosuke Ozasa, Aira Matsugaki, Yoshihiro Isobe, Taro Saku, Takayoshi Nakano

MATERIALS TRANSACTIONS　Vol. 58　No. 6　p. 958-962　2017　Research paper (scientific journal)

Fluorescent Imaging of Cell Arrangement Controlled by Materials Scientific Techniques

Matsugaki Aira, Nakano Takayoshi

Materia Japan　Vol. 55　No. 12　p. 579-579　2016/12

３Dプリンタの医療デバイスへの応用

中野貴由, 石本卓也

月刊機能材料　2016/12

Alignment of Biological Apatite Crystallites in Peri-Implant Bone of Beagles

Kento Odaka, Satoru Matsunaga, Massaki Kasahara, Takayoshi Nakano, Masao Yoshinari, Shinichin Abe

Materials Transactions　2016/11　Research paper (scientific journal)

WBCからみる世界のバイオマテリアル研究

石川邦夫, 山岡哲二, 中野貴由

バイオマテリアル－生体材料－　Vol. 34　No. 4　p. 260-267　2016/10

【巻頭言】マスカスタム医療時代に向けたバイオマテリアルの研究開発

中野貴由

バイオマテリアル－生体材料－　2016/08

Biological apatite crystallite alignment analysis of human maxillary molar region cortical bone with microbeam X-ray diffraction

Masaaki Kasahara, Satoru Matsunaga, Kento Odaka, Takuya Ishimoto, Takayoshi Nakano, Masao Yoshinari, Shinichi Abe

Journal of hard Tissue Biology　2016/08　Research paper (scientific journal)

Plastic deformation behavior of the Mg-based LPSO phases with various crystal structures

K. Hagihara, T. Okamoto, H. Izuno, M. Yamasaki, M. Matsushita, T. Nakano, Y. Kawamura

Proceedings of PRICM9　2016/08　Research paper (international conference proceedings)

人工骨適応のために知っておきたい骨微細構造の配向性

中野 貴由

第1回整形外傷人工骨研究会小冊子　2016/07

Control of cellular arrangement by surface topography induced by plastic deformation

Aira Matsugaki, Takayoshi Nakano

Crystals　Vol. 6　No. 6　2016/06/22　Research paper (scientific journal)

Anomalous strengthening behavior of Co–Cr–Mo alloy single crystals for biomedical applications

K. Hagihara, T. Nakano, K. Sasaki

Scripta Materialia　2016/06　Research paper (scientific journal)

生体適合性の高いボーンバイオメカニクスデバイスの開発

中野貴由

2016/05

3Dプリンタを活用した機能性構造材料の創製 －骨・骨関節代替用材料－

中野貴由

「工業材料」誌　Vol. 64　No. 5　p. 57-62　2016/05

Electron backscatter diffraction pattern analysis of the deformation band formed in the Mg-based long-period stacking ordered phase

Koji Hagihara, Takuya Okamoto, Michiaki Yamasaki, Yoshihito Kawamura, Takayoshi Nakano

SCRIPTA MATERIALIA　Vol. 117　p. 32-36　2016/05　Research paper (scientific journal)

Plastic deformation behavior of 10H-type synchronized LPSO phase in a Mg-Zn-Y system

Koji Hagihara, Takuya Okamoto, Hitoshi Izuno, Michiaki Yamasaki, Masafumi Matsushita, Takayoshi Nakano, Yoshihito Kawamura

ACTA MATERIALIA　Vol. 109　p. 90-102　2016/05　Research paper (scientific journal)

Bone Mechanobiology and Regulation of Preferential Apatite Orientation

Vol. 34　No. 2　p. 138-143　2016/04

Influence of Implant Neck Design on Bone Formation Under Mechanical Repetitive Loading: Histomorphometric and Microcomputed Tomographic Studies in Rabbit Tibiae

Munenori Yasutake, Shinichiro Kuroshima, Takuya Ishimoto, Takayoshi Nakano, Takashi Sawase

IMPLANT DENTISTRY　Vol. 25　No. 2　p. 171-178　2016/04　Research paper (scientific journal)

Effect of additional elements on fracture toughness of (Mo0.85Nb0.15)Si2 C40/C11b lamellar-structured crystals

Koji Hagihara, Koretaka Yuge, Takaaki Ikenishi, Haruka Araki, Takayoshi Nakano

Materials Letters　Vol. 117　p. 99-103　2016/04　Research paper (scientific journal)

Creep-deformation behavior of (Mo0.85Nb0.15)Si-2 lamellar-structured C40/C11(b) two-phase crystals

Koji Hagihara, Haruka Araki, Takaaki Ikenishi, Takayoshi Nakano

ACTA MATERIALIA　Vol. 107　p. 196-212　2016/04　Research paper (scientific journal)

Microstructure and fracture toughness in boron added NbSi2(C40)/MoSi2(C11(b)) duplex crystals

Mitsuharu Todai, Koji Hagihara, Kyosuke Kishida, Haruyuki Inui, Takayoshi Nakano

SCRIPTA MATERIALIA　Vol. 113　p. 236-240　2016/03　Research paper (scientific journal)

Evaluation of crystallographic orientation of biological apatite in vertebral cortical bone in ovariectomized cynomolgus monkeys treated with minodronic acid and alendronate

Makoto Tanaka, Aira Matsugaki, Takuya Ishimoto, Takayoshi Nakano

JOURNAL OF BONE AND MINERAL METABOLISM　Vol. 34　No. 2　p. 234-241　2016/03　Research paper (scientific journal)

Development of Customized Bone Plate for Companion Animal

Inoue Takayuki, Ishizaka Haruhiko, Nakashima Yoshio, Sasai Hiroshi, Nakano Takayoshi

Materia Japan　Vol. 55　No. 2　p. 64-66　2016/02

電子ビーム積層造形法による伴侶動物骨折治療用アナトミカルプレートの開発

井上貴之, 石坂春彦, 中島義雄, 佐々井浩志, 中野貴由

粉体および粉末冶金　2016/02

金属3Dプリンタ技術によるカスタム照明の開発

寺西正俊, 西田一人, 中野貴由, 荒木秀樹, 田中敏宏

粉体および粉末冶金　2016/02

Elastic-modulus enhancement during room-temperature aging andits suppression in metastable TieNb-Based alloys with low body-centered cubic phase stability

M. Tane, K. Hagihara, M. Ueda, T. Nakano, Y. Okuda

Acta Materialia　2016/02　Research paper (scientific journal)

Orientation dependence of the deformation kink band formation behavior in Zn single crystal

Koji Hagihara, Tsuyoshi Mayama, Masahito Honnami, Michiaki Yamasaki, Hitoshi Izuno, Takuya Okamoto, Tetsuya Ohashi, Takayoshi Nakano, Yoshihito Kawamura

INTERNATIONAL JOURNAL OF PLASTICITY　Vol. 77　p. 174-191　2016/02　Research paper (scientific journal)

Analysis of preferential apatite/collagen orientation in bones and development of bone implants for inducing sound orientation

Ishimoto Takuya, Nakano Takayoshi

Transactions of Japanese Society for Medical and Biological Engineering　Vol. 54　No. 27　p. S171-S171　2016

Disruption of Collagen Matrix Alignment in Osteolytic Bone Metastasis Induced by Breast Cancer

Aiko Sekita, Aira Matsugaki, Takayoshi Nakano

MATERIALS TRANSACTIONS　Vol. 57　No. 12　p. 2077-2082　2016　Research paper (scientific journal)

Alignment of Biological Apatite c-Axis Under Functional Loading: A Preliminary Report

Ryo Jimbo, Takayoshi Nakano, Takashi Sawase

IMPLANT DENTISTRY　Vol. 25　No. 5　p. 594-598　2016　Research paper (scientific journal)

Elastic-modulus enhancement during room-temperature aging and its suppression in metastable Ti-Nb-Based alloys with low body-centered cubic phase stability

M. Tane, K. Hagihara, M. Ueda, T. Nakano, Y. Okuda

ACTA MATERIALIA　Vol. 102　p. 373-384　2016/01　Research paper (scientific journal)

骨芽細胞配列化による異方性骨基質構築、

松垣あいら, 中野貴由

バイオマテリアル―生体材料―　2016/01

骨芽細胞配列化による異方性骨基質構築

松垣あいら, 中野貴由

バイオマテリアル　2016/01

異方性カスタム設計・AM(3Dプリンター)研究開発センターの概要と展望 : SIP革新的設計生産技術「三次元異方性カスタマイズ化設計・付加製造拠点の構築と地域実証」

田中 敏宏, 中野 貴由, 中本 将嗣

Techno net : 大阪大学工業会誌　No. 571　p. 14-19　2016/01

異方性骨基質構築のための細胞配列化制御

松垣あいら, 中野貴由

The Bone　2016/01

積層造形技術による金属製カスタム照明の開発とデライト価値の創出

寺西正俊, 西田一人, 中野貴由, 田中敏宏, 掛下知行

まてりあ　2016/01

Comprehensive analyses of how tubule occlusion and advanced glycation end-products diminish strength of aged dentin

Yuko Shinno, Takuya Ishimoto, Mitsuru Saito, Reo Uemura, Masumi Arino, Keishi Marumo, Takayoshi Nakano, Mikako Hayashi

SCIENTIFIC REPORTS　Vol. 6　2016/01　Research paper (scientific journal)

粉末冶金学的手法による骨アパタイト結晶粒子の配向化挙動の解明とそれに基づく新規骨代替インプラントの開発

中野貴由, 石本卓也

粉体および粉末冶金　2015/12

粉末冶金学的手法による骨アパタイト結晶粒子の配向化挙動の解明とそれに基づく新規骨代替インプラントの開発

中野貴由, 石本卓也

粉体および粉末冶金　2015/12　Research paper (scientific journal)

Altered material properties are responsible for bone fragility in rats with chronic kidney injury

Yoshiko Iwasaki, Junichiro J. Kazama, Hideyuki Yamato, Aira Matsugaki, Takayoshi Nakano, Masafumi Fukagawa

BONE　Vol. 81　p. 247-254　2015/12　Research paper (scientific journal)

はじめに～SIP（戦略的イノベーション創造プログラム）／革新的設計生産技術「三次元異方性カスタマイズ化設計・付加製造拠点の構築と地域実証」の活動紹介

掛下知行, 田中敏宏, 中野貴由, 荒木秀樹, 古寺雅晴, 山口勝己, 西田一人, 寺西正俊

まてりあ　Vol. 54　No. 10　p. 491-521　2015/10

テーラーメイド医療時代の到来で生まれる金属3Dプリンタによるビジネスチャンス

中野貴由

マテリアルステージ　Vol. 15　No. 7　p. 38-44　2015/10

Structural and Qualitative Bone Remodeling Around Repetitive Loaded Implants in Rabbits

Shinichiro Kuroshima, Munenori Yasutake, Kotaro Tsuiki, Takayoshi Nakano, Takashi Sawase

CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH　Vol. 17　p. E699-E710　2015/10　Research paper (scientific journal)

Mechanisms of lamellar structure formation and Cr interfacial segregation in C11(b)-MoSi2/C40-NbSi2 dual phase silicide verified by a phase-field simulation incorporating elastic inhomogeneity

Toshihiro Yamazaki, Yuichiro Koizumi, Koretaka Yuge, Akihiko Chiba, Koji Hagihara, Takayoshi Nakano, Kyosuke Kishida, Haruyuki Inui

COMPUTATIONAL MATERIALS SCIENCE　Vol. 108　p. 358-366　2015/10　Research paper (scientific journal)

New powder/solid composite exhibiting low Young’s modulus and energy absorption for biomedical applications fabricated by additive manufacturing

Nakano Takayoshi, IKEO NAOKO, ISHIMOTO Takuya, Inoue Toru

Proceedings of Ti-2015　2015/08　Research paper (international conference proceedings)

目で見るBone Biology(第41回)骨石灰化,アパタイト配向性

中野 貴由, 石本 卓也, 松垣 あいら

骨粗鬆症治療 = Journal of osteoporotic medicine　Vol. 14　No. 2　p. 97-100　2015/08

Novel powder/solid composites possessing low Young's modulus and tunable energy absorption capacity, fabricated by electron beam melting, for biomedical applications

Naoko Ikeo, Takuya Ishimoto, Takayoshi Nakano

JOURNAL OF ALLOYS AND COMPOUNDS　Vol. 639　p. 336-340　2015/08　Research paper (scientific journal)

金属3Dプリンター活用、骨代替材料を作製

中野貴由

セラミックス　2015/07

Alignment of Biological Apatite Crystallites in Posterior Cortical Bone of Human Edentulous Mandible

Masayuki Iwata, Satoru Matsunaga, Toshiyuki Morioka, Takayoshi Nakano, Shinichi Abe, Masao Yoshinari, Yasutomo Yajima

JOURNAL OF HARD TISSUE BIOLOGY　Vol. 24　No. 3　p. 235-240　2015/07　Research paper (scientific journal)

Combination of BMP-2-releasing gelatin/beta-TCP sponges with autologous bone marrow for bone regeneration of X-ray-irradiated rabbit ulnar defects

Masaya Yamamoto, Akishige Hokugo, Yoshitake Takahashi, Takayoshi Nakano, Masahiro Hiraoka, Yasuhiko Tabata

BIOMATERIALS　Vol. 56　p. 18-25　2015/07　Research paper (scientific journal)

力学特性を支配する骨ナノ微細構造の異方性解析

石本卓也, 荒木裕太郎, 西田倫希, 田口英次, 保田英洋, 森博太郎, 中野貴由

大阪大学超高圧電子顕微鏡センター平成26年度年報　Vol. 43　p. 60-61　2015/06　Research paper (bulletin of university, research institution)

Early initiation of endochondral ossification of mouse femur cultured in hydrogel with different mechanical stiffness

Vol. 21　No. 6　p. 567-575　2015/06　Research paper (scientific journal)

Stochastic multi-scale prediction on the apparent elastic moduli of trabecular bone considering uncertainties of biological apatite (BAp) crystallite orientation and image-based modelling

Vol. 18　No. 2　p. 162-174　2015/06　Research paper (scientific journal)

Early Initiation of Endochondral Ossification of Mouse Femur Cultured in Hydrogel with Different Mechanical Stiffness

Sathi GA, Kenmizaki K, Yamaguchi S, Nagatsuka H, Yoshida Y, Matsugaki A, Ishimoto T, Imazato S, Nakano T, Matsumoto T

Tissue Engineering Part C Methods　2015/06　Research paper (scientific journal)

Early Initiation of Endochondral Ossification of Mouse Femur Cultured in Hydrogel with Different Mechanical Stiffness

Gulsan Ara Sathi, Kodai Kenmizaki, Satoshi Yamaguchi, Hitoshi Nagatsuka, Yasuhiro Yoshida, Aira Matsugaki, Takuya Ishimoto, Satoshi Imazato, Takayoshi Nakano, Takuya Matsumoto

TISSUE ENGINEERING PART C-METHODS　Vol. 21　No. 6　p. 567-575　2015/06　Research paper (scientific journal)

Activities at Osaka University towards Cross-Ministerial Strategic Innovation Promotion Program (SIP), Innovative Design/Manufacturing Technologies (Establishment and Validation of the Base for 3D Design & Additive Manufacturing Standing on the Concepts of "Anisotropy" & "Customization")

Vol. 67　No. 4　p. 101-103　2015/04　Research paper (bulletin of university, research institution)

Powder-based Additive Manufacturing for Development of Tailor-made Implants for Orthopedic Applications

Takayoshi Nakano, Takuya Ishimoto

KONA POWDER AND PARTICLE JOURNAL　No. 32　p. 75-84　2015/03

Quantitative regulation of bone-mimetic, oriented collagen/apatite matrix structure depends on the degree of osteoblast alignment on oriented collagen substrates

Aira Matsugaki, Yoshihiro Isobe, Taro Saku, Takayoshi Nakano

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A　Vol. 103　No. 2　p. 489-499　2015/02　Research paper (scientific journal)

Bone tissue and biomaterial design based on the anisotropic microstructure

Takayoshi Nakano

Springer Series in Biomaterials Science and Engineering　Vol. 3　p. 3-30　2015　Research paper (scientific journal)

Control of &ldquo;Material Parameters&rdquo; and &ldquo;Structural Parameters&rdquo; for Anisotropic and Customized Design

Nakano Takayoshi, Ishimoto Takuya, Hagihara Koji, Ide Takuya, Nakamoto Masashi, Suyalatu, Sun Shihai, Araki Hideki, Tamaoka Hidefusa

Materia Japan　Vol. 54　No. 10　p. 502-504　2015　Research paper (scientific journal)

An Approach to Creation of Innovation Styles for Anisotropic and Customized Design and Manufacture

Araki Hideki, Nakano Takayoshi, Ishimoto Takuya, Hagihara Koji, Ide Takuya, Nakamoto Masashi, Tamaoka Hidefusa

Materia Japan　Vol. 54　No. 10　p. 519-521　2015

Delight Assessment of Anisotropic Custom Plate

Abe Shingo, Murase Tsuyoshi, Sakai Takashi, Ishimoto Takuya, Nakano Takayoshi, Yoshikawa Hideki

Materia Japan　Vol. 54　No. 10　p. 515-516　2015

Osaka University Anisotropic Design & AM Research Center

Tanaka Toshihiro, Nakano Takayoshi, Nakamoto Masashi, Ide Takuya

Materia Japan　Vol. 54　No. 10　p. 498-499　2015

Motivations and Concepts for Our SIP Program on &ldquo;Establishment and Validation of the Base for 3D Design & Additive Manufacturing Standing on the Concept &ldquo;Anisotropy&rdquo; & &ldquo;Customization&rdquo; &rdquo;

Kakeshita Tomoyuki, Tanaka Toshihiro, Nakano Takayoshi

Materia Japan　Vol. 54　No. 10　p. 496-497　2015

Development of Single Crystalline Bone Plate with Low Young's Modulus Using Beta-type Ti-15Mo-5Zr-3Al Alloy

Todai Mitsuharu, Hagihara Koji, Ishimoto Takuya, Yamamoto Kengo, Nakano Takayoshi

Tetsu-to-Hagane　Vol. 101　No. 9　p. 501-505　2015　Research paper (scientific journal)

In-Situ Observation on the Formation Behavior of the Deformation Kink Bands in Zn Single Crystal and LPSO Phase

Koji Hagihara, Masahito Honnami, Ryosuke Matsumoto, Yoshihiro Fukusumi, Hitoshi Izuno, Michiaki Yamasaki, Takuya Okamoto, Takayoshi Nakano, Yoshihito Kawamura

MATERIALS TRANSACTIONS　Vol. 56　No. 7　p. 943-951　2015　Research paper (scientific journal)

Solid/Powder Clad Ti-6Al-4V Alloy with Low Young's Modulus and High Toughness Fabricated by Electron Beam Melting

Naoko Ikeo, Takuya Ishimoto, Natsumi Hiramoto, Hidetsugu Fukuda, Hiroyuki Ogisu, Yutaro Araki, Takayoshi Nakano

MATERIALS TRANSACTIONS　Vol. 56　No. 5　p. 755-758　2015　Research paper (scientific journal)

Degree of apatite c-axis orientation predominantly determines bone mechanical function

Vol. 33　No. 1　p. 35-37　2015/01

Powder-based Additive Manufacturing for Development of Tailor-made Implants for Orthopedic Applications

Takayoshi Nakano, Takuya Ishimoto

KONA POWDER AND PARTICLE JOURNAL　Vol. 32　No. 32　p. 75-84　2015

Abnormal arrangement of a collagen/apatite extracellular matrix orthogonal to osteoblast alignment is constructed by a nanoscale periodic surface structure

Aira Matsugaki, Gento Aramoto, Takafumi Ninomiya, Hiroshi Sawada, Satoshi Hata, Takayoshi Nakano

BIOMATERIALS　Vol. 37　p. 134-143　2015/01　Research paper (scientific journal)

Crystallographic nature of deformation bands shown in Zn and Mg-based longperiod stacking ordered (LPSO) phase

K. Hagihara, M. Yamasaki, M. Honnami, H. Izuno, M. Tane, T. Nakano, Y. Kawamura

Philosophical Magazine　Vol. 95　No. 2　p. 132-157　2015/01　Research paper (scientific journal)

Evaluation of effectiveness of oriented groove structure based on mechanical bone functions around artificial hip prostheses.

Y. Noyama, T. Sakai, H. Fukuda, H. Yoshikawa, T. Nanano, Y. Nanashima

Japanese Journal of Clinical Biomechanics　Vol. 35　p. 201-206　2014/11　Research paper (scientific journal)

Mechanisms of Cr segregation to C11(b)/C40 lamellar interface in (Mo,Nb)Si-2 duplex silicide: A phase-field study to bridge experimental and first-principles investigations

Toshihiro Yamazaki, Yuichiro Koizumi, Koretaka Yuge, Akihiko Chiba, Koji Hagihara, Takayoshi Nakano, Kyosuke Kishida, Haruyuki Inui

INTERMETALLICS　Vol. 54　p. 232-241　2014/11　Research paper (scientific journal)

金属すべり線による骨芽細胞の配列化制御 —転位運動に由来するすべり線段差により世界初の骨芽細胞配列制御に成功—

松垣あいら, 中野貴由

バイオマテリアル研究の最前線　p. 223-224　2014/10

生体アパタイト集合組織によるbFGF徐放再生硬組織評価 —骨密度にかわる新たな高精度骨評価指標の確立—

石本卓也, 中野貴由

バイオマテリアル研究の最前線　p. 215-216　2014/10

骨力学機能を支配する生体アパタイト結晶学的配向性 —再生骨における骨配向性は骨密度に遅れて再生し、骨力学特性を支配する—

石本卓也, 中野貴由

バイオマテリアル研究の最前線　p. 209-210　2014/10

微小領域X線回折法を用いた生体骨におけるin vivo応力に基づく骨部位に依存した生体アパタイト配向性の解明 —骨密度よりも敏感な骨部位に特異的なアパタイトの結晶学的配向性-

中野貴由

バイオマテリアル研究の最前線　p. 203-204　2014/10

薬事認可されたb型Ti-15Mo-5Zr-3Al単結晶の低弾性化と異方化機構の解明 —単結晶化を利用した次世代骨プレートの提案と設計理論—

當代光陽, 中野貴由

バイオマテリアル研究の最前線　p. 29-30　2014/10

Evaluation of effectiveness of oriented groove structure based on mechanical bone functions around artificial hip prostheses

Vol. 35　p. 201-205　2014/10

骨芽細胞の長期的メカニカルストレス応答による骨基質構造制御

松垣あいら, 藤原奈津子, 中野貴由

臨床バイオメカニクス学会誌　Vol. 35　p. 7-13　2014/10

六方晶系材料にて観察される変形帯の特徴

本浪雅史, 萩原幸司, 伊津野仁史, 多根正和, 山崎倫昭, 眞山剛, 中野貴由, 河村能人

第58回 日本学術会議材料工学連合講演会 講演論文集　2014/10　Research paper (other academic)

強化相としてのLPSO相が示す塑性異方性

萩原幸司, 岡本拓也, 伊津野仁史, 本浪雅史, 山崎倫昭, 中野貴由, 河村能人

第58回 日本学術会議材料工学連合講演会 講演論文集　p. 325-326　2014/10　Research paper (other academic)

二重構造による椎間ケージのMRアーチファクトの低減

押野見 一哉, 唐 明輝, 西 慶悟, 石本 卓也, 中野 貴由, 山本 徹

日本放射線技術学会雑誌　Vol. 70　No. 9　p. 964-964　2014/09

3Dプリンターによるものづくり : 材質パラメータ・構造パラメータの重要性に焦点を当てて (特集 3Dプリンターでのものづくりを考察する)

中野 貴由

機能材料　Vol. 34　No. 9　p. 5-11　2014/09

特集3Dプリンターでのものづくりを考察する、「特集にあたって」

中野貴由

機能材料　Vol. 34　No. 9　p. 3-4　2014/09

Classification and visualization of primary trabecular bone in lumbar vertebrae

Vol. 1　No. 2　p. 111-126　2014/09　Research paper (scientific journal)

Misfit analysis in lamellar microstructure in NbSi2/MoSi2 duplex crystals

Vaclav Paidar, Takayoshi Nakano

JOURNAL OF ALLOYS AND COMPOUNDS　Vol. 607　p. 48-49　2014/09　Research paper (scientific journal)

Dietary L-Lysine Prevents Arterial Calcification in Adenine-Induced Uremic Rats

Akihiro Shimomura, Isao Matsui, Takayuki Hamano, Takuya Ishimoto, Yumiko Katou, Kenji Takehana, Kazunori Inoue, Yasuo Kusunoki, Daisuke Mori, Chikako Nakano, Yoshitsugu Obi, Naohiko Fujii, Yoshitsugu Takabatake, Takayoshi Nakano, Yoshiharu Tsubakihara, Yoshitaka Isaka, Hiromi Rakugi

JOURNAL OF THE AMERICAN SOCIETY OF NEPHROLOGY　Vol. 25　No. 9　p. 1954-1965　2014/09　Research paper (scientific journal)

Control of Mechanical Properties of Three-Dimensional Ti-6Al-4V Products Fabricated by Electron Beam Melting with Unidirectional Elongated Pores

Naoko Ikeo, Takuya Ishimoto, Ai Serizawa, Takayoshi Nakano

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE　Vol. 45A　No. 10　p. 4293-4301　2014/09　Research paper (scientific journal)

Degradation behavior of Ca-Mg-Zn intermetallic compounds for use as biodegradable implant materials

Koji Hagihara, Shuhei Shakudo, Kenta Fujii, Takayoshi Nakano

Materials Science Engineering C　2014/08　Research paper (scientific journal)

テリパラチドの間欠投与はOVXしたサル脛骨皮質骨において骨質指標であるアパタイト配向性を正常値に維持する

中野貴由, 祢津俊介, 石本卓也, 下村綾, 山根宏志, 高尾亮子, 磯谷幸宏

Osteoporosis Japan　Vol. 22　No. 3　p. 47-50　2014/07

Additive Manufacturing of Titanium Alloys Fabricated by Metal 3D Printing System and Development of Two Titanium Alloys with Different Characteristics

Vol. 62　No. 3　p. 181-187　2014/07

Structural design of bone implant materials for control of apatite/collagen orientation

Vol. 32　No. 3　p. 197-206　2014/07

Control of microstructure and fracture toughness improvement of NbSi2/MoSi2 duplex lamellar silicides by TaC particles dispersion

Koji Hagihara, Tatsuya Fushiki, Takayoshi Nakano

SCRIPTA MATERIALIA　Vol. 82　p. 53-56　2014/07　Research paper (scientific journal)

Mechanisms of Cr segregation to C11b/C40 lamellar interface in (Mo,Nb)Si2 duplex silicide: a phase-field study to bridge experimental and first-principles investigations

Yuichiro Koizumi, Toshihiro Yamazaki, Koretaka Yuge, Akihiko Chiba, K. HagiharaTakayoshi Nakano, Kyosuke Kishida, Haruyuki Inui

Intermetalics　Vol. 54　p. 232-241　2014/07　Research paper (scientific journal)

Control of oriented extracellular matrix similar to anisotropic bone microstructure

T. Nakano, A. Matsugaki, T. Ishimoto, M. Todai, A. Serizawa, R. Suetoshi, Y. Noyama, W. Fujitani

Materilas Science Forum　Vol. 783-786　p. 72-77　2014/07　Research paper (scientific journal)

Effect of phase stability on some physical and mechanical properties in β-Ti single crystal for biomedical applications

M. Todai, P. Wang, K. Fukunaga, T. Nakano

Materilas Science Forum　2014/07　Research paper (scientific journal)

Promotion of Endodontic Lesions in Rats by a Novel Extraradicular Biofilm Model Using Obturation Materials

Katsutaka Kuremoto, Yuichiro Noiri, Takuya Ishimoto, Naomichi Yoneda, Reiko Yamamoto, Hazuki Maezono, Takayoshi Nakano, Mikako Hayashi, Shigeyuki Ebisu

APPLIED AND ENVIRONMENTAL MICROBIOLOGY　Vol. 80　No. 13　p. 3804-3810　2014/07　Research paper (scientific journal)

Imaging of biological apatite crystallographic orientation in bone utilizing microbeam X-ray diffractometer

Vol. 28　No. 2　p. 97-103　2014/06

生体内腐食環境と生体材料

松垣あいら, 中野貴由

(社)腐食防食協会会誌「材料と環境」　Vol. 63　No. 5　p. 290-294　2014/05

人工材料による骨疾患治療

松垣あいら, 中野貴由

実験医学増刊号　Vol. 32　No. 7　p. 203-211　2014/05

Control of oriented extracellular matrix similar to anisotropic bone microstructure

Vol. 783-786　p. 72-77　2014/05　Research paper (scientific journal)

Analysis of osteocyte morphology in terms of sensation of in vivo stress applied on bone

Vol. 783-786　p. 1265-1268　2014/05　Research paper (scientific journal)

Microstructure of Co-Cr alloy products with three-dimensional geometry fabricated by laser beam sintering

Vol. 783-786　p. 1349-1353　2014/05　Research paper (scientific journal)

３Dプリンターの医療応用

中野貴由

日本医事新報　2014/05

Development of An Artificial Hip Stem with Oriented Grooves to Control Bone Orientation

Vol. 49　No. 5　p. 402-405　2014/05

骨配向化を制御する配向溝付き人工股関節ステムの開発

野山義裕, 中野貴由, 石本卓也, 石坂春彦, 坂井孝司, 吉川秀樹, 中島義雄

セラミックス　2014/05

Promotion of Endodontic Lesions in Rats by a Novel Extraradicular Biofilm Model Using Obturation Materials,

Vol. 80　No. 13　p. 3804-3810　2014/04　Research paper (scientific journal)

Microsructure and mechanical properties of the NbSi2/MoSi2 crystal with lamellar structure

K. Hagihara, Y. Hama, T. Fushiki, K. Yuge, T. Nakano

Materials Science Forum　Vol. 783-786　p. 1123-1128　2014/04　Research paper (scientific journal)

Control of microstructure and fracture toughness improvement of NbSi2MoSi2 duplex lamellar silicides by TaC particles dispersion

K. Hagihara, T. Fushiki, T. Nakano

Scripta Materialia　Vol. 82　p. 53-56　2014/04　Research paper (scientific journal)

Ab-initio study of long-period superstructures and anti-phase boundaries in Al-rich gamma-TiAl (L1(0))-based alloys

P. S. Ghosh, A. Arya, U. D. Kulkarni, G. K. Dey, S. Hata, T. Nakano, K. Hagihara, H. Nakashima

PHILOSOPHICAL MAGAZINE　Vol. 94　No. 11　p. 1202-1218　2014/04　Research paper (scientific journal)

Promotion of Endodontic Lesions in Rats by a Novel Extraradicular Biofilm Model Using Obturation Materials

Vol. 783-786　p. 1303-1306　2014/03　Research paper (scientific journal)

Ab-initio Study of long-period superstructures and anti-phase boundaries in Al-rich γ-TiAl (L10) based alloys

Vol. 94　No. 11　p. 1202-1218　2014/03　Research paper (scientific journal)

骨配向性を基軸にした骨異方性組織誘導と骨形態計測

石本卓也, 中野貴由

骨形態計測学会誌　2014/03

バイオミネラルの異方的結晶化

松垣あいら, 中野貴由

CLINICAL CALCIUM　2014/02

提言「生体機能実現のための三次元階層構造設計」

中野貴由

バイオマテリアル　2014/02

Control of bone matrix structure by cellular responses to long-term mechanical stress

A. Matsugaki, N. Fujiwara, T. Nakano

Japanese Journal of Clinical Biomechanics　Vol. 35　p. 7-13　2014

テリパラチドの間欠投与はOVXしたサル脛骨皮質骨において骨質指標であるアパタイト配向性を正常値に維持する (第15回日本骨粗鬆症学会)

中野 貴由, 祢津 俊介, 石本 卓也

オステオポローシスジャパン : 日本骨粗鬆症学会雑誌　Vol. 22　No. 3　p. 483-486　2014

Oriented collagen scaffolds for anisotropic bone tissue construction in vitro

Aira Matsugaki, Ryosuke Ozasa, Yoshihiro Isobe, Taro Saku, Takayoshi Nakano

Materials Science Forum　Vol. 783-786　p. 1303-1306　2014　Research paper (international conference proceedings)

Interface migration with segregation in MoSi<inf>2</inf>-based lamellar alloy simulated by phase-field method

Toshihiro Yamazaki, Yuichiro Koizumi, Akihiko Chiba, Koji Hagihara, Takayoshi Nakano, Koretaka Yuge, Kyosuke Kishida, Haruyuki Inui

Advanced Materials Research　Vol. 922　p. 832-837　2014　Research paper (international conference proceedings)

Development of Metal Bio-functional Materials by Additive Manufacturing

NAKANO Takayoshi

Journal of Smart Processing　Vol. 3　No. 3　p. 167-174　2014

Fabrication of Porous Titanium Based Alloy for Medical Implant

Vol. 87　No. 12　p. 428-432　2013/12

Mg基シンクロ型LPSO相の塑性変形機構、Mg合金強化に及ぼす寄与

萩原幸司, 山崎倫昭, 中野貴由, 河村能人

第57回 日本学術会議材料工学連合講演会 講演論文集　2013/11　Research paper (other academic)

Possibility of Mg- and Ca-based intermetallic compounds as new biodegradable implant materials

Vol. 33　p. 4101-4111　2013/10　Research paper (scientific journal)

Fabrication and development of bone-graft materials by electron beam melting (EBM) method as an additive manufacturing (AM)

Vol. 31　No. 4　p. 228-237　2013/10

生体骨異方性に基づくバイオマテリアルの高機能化

松垣あいら, 中野貴由

機能材料　2013/09

積層造形法を用いた材質・構造設計による人工関節の高機能化

福田英次, 西村直之, 中川誠治, 中野貴由, 中島義雄

機能材料　2013/09

Fabrication of Functional Biomaterials based on Bone Tissue Anisotropy

Vol. 33　No. 9　p. 40-47　2013/09

Formation and regeneration of preferential alignment of extra cellular matrix in calvaria analysed by microbeam X-ray diffractometer

T. Ishimoto, D. Taguchi, T. Nakano

2013/08

Preferential Orientation of Collagen/Biological Apatite in Growing Rat Ulna under an Artificial Loading Condition

Jun Wang, Takuya Ishimoto, Takayoshi Nakano

MATERIALS TRANSACTIONS　Vol. 54　No. 8　p. 1257-1261　2013/08　Research paper (scientific journal)

Deformation behavior of LPSO phase and Zn accompanied by kink band formation

K. Hagihara, Y. Fukusumi, M. Yamasaki, R. Matsumoto, M. Honnami, H. Izuno, T. Nakano, Y. Kawamura

Proc. of PRICM8　2013/08　Research paper (scientific journal)

Uncertainty Modeling in the Prediction of Effective Mechanical Properties Using Stochastic Homogenization Method with Application to Porous Trabecular Bone

Khairul Salleh Basaruddin, Naoki Takano, Hikaru Akiyama, Takayoshi Nakano

MATERIALS TRANSACTIONS　Vol. 54　No. 8　p. 1250-1256　2013/08　Research paper (scientific journal)

1400℃に耐える合金

萩原幸司, 中野貴由, 弓削是貴

CERAMICS JAPAN　2013/07

Cr segregation at C11(b)/C40 interface in MoSi2-based alloys: A first-principles study

Koretaka Yuge, Kyosuke Kishida, Haruyuki Inui, Yuichiro Koizumi, Koji Hagihara, Takayoshi Nakano

INTERMETALLICS　Vol. 42　p. 165-169　2013/07　Research paper (scientific journal)

Continuous cyclic stretch induces osteoblast alignment and formation of anisotropic collagen fiber matrix

A. Matsugaki, N. Fujiwara, T. Nakano

Acta Biomaterialia　2013/07　Research paper (scientific journal)

副甲状腺ホルモン投与による骨細胞性骨溶解に関する微細構造学的検索

本郷 裕美, 山田 珠希, 山本 知真也, 中野 貴由, 宇田川 信之, 網塚 憲生

日本骨形態計測学会雑誌　Vol. 23　No. 1　p. S84-S84　2013/06

1400℃に耐える合金

萩原幸司, 中野貴由

Ceramics Japan　Vol. 48　2013/06

Possibility of Mg- and Ca-based intermetallic compounds as new biodegradable implant materials

Koji Hagihara, Kenta Fujii, Aira Matsugaki, Takayoshi Nakano

Materials Science and Engineering C　Vol. 33　p. 4101-4111　2013/06　Research paper (scientific journal)

First-principles investigation of phase stability and electronic structure of tetragonal (P4/m) Ga3-xAlxTi2 (x=03) compounds

P. S. Ghosh, A. Arya, U. D. Kulkarni, G. K. Dey, T. Nakano, Y. Umakoshi, K. Hagihara, S. Hata

PHILOSOPHICAL MAGAZINE LETTERS　Vol. 93　No. 5　p. 273-282　2013/05　Research paper (scientific journal)

Time course micro-CT analysis of periapical lesions using an extraradicular biofilm model in rat

K. Kuremoto, Y. Noiri, T. Ishimoto, T. Nagayama, W. Kiba, H. Maezono, R. Yamamoto, N. Yoneda, T. Nakano, M. Hayashi, S. Ebisu

2013/05

骨基質微細構造の配向性と配向化制御

松垣あいら, 石本卓也, 中野貴由

THE BONE　2013/05

Degree of biological apatite c-axis orientation rather than bone mineral density controls mechanical function in bone regenerated using recombinant bone morphogenetic protein-2

Takuya Ishimoto, Takayoshi Nakano, Yukichi Umakoshi, Masaya Yamamoto, Yasuhiko Tabata

JOURNAL OF BONE AND MINERAL RESEARCH　Vol. 28　No. 5　p. 1170-1179　2013/05　Research paper (scientific journal)

Relationship between Preferential Alignment of Biological Apatite and Young's Modulus at First Molar in Human Mandible Cortical Bone

Tatsuji Matsumoto, Satoru Matsunaga, Toshiyuki Morioka, Takayoshi Nakano, Masao Yoshinari, Yasutomo Yajima

JOURNAL OF HARD TISSUE BIOLOGY　Vol. 22　No. 2　p. 163-169　2013/04　Research paper (scientific journal)

Nonbasal slips in Ni3(Ti, Nb) and Ni3(Ti, Al) single crystals with various long-period stacking ordered structures

K. Hagihara, T. Tanaka, H. Izuno, Y. Umakoshi, T. Nakano

Acta materilaia　Vol. 61　p. 4365-4373　2013/04　Research paper (scientific journal)

Contributions of microstructure and composition to mechanical properties of dentin

Y. Takeda, Y. Furuya, T. Ishimoto, T. Nakano, M. Hayashi

2013/03

ω Transformation in cold worked Ti-Nb-Ta-Zr-O alloys with low body-centered cubic phase stability and its correlation with their elastic properties

M. Tane, T. Nakano, S. Kuramoto, M. Niinomi, N. Takesue, H. Nakajima

Acta Materialia　2013/03　Research paper (scientific journal)

Misfit strain affecting the lamellar microstructure in NbSi2/MoSi2 duplex crystals

K. Hagihara, Y. Hama, K. Yuge, T. Nakano

Acta materialia　2013/03　Research paper (scientific journal)

Yield stress anomaly controlled by the phase stability in NbSi 2 single crystals, Scripta Materialia

T. Nakano, K. Hagihara

Scripta Materialia　2013/02　Research paper (scientific journal)

Long-period ordered superstructures that appear in an (Al,Ga)-rich (Al,Ga)Ti system

T. Nakano, K Hagihara, S. Hata, H. Shigyo, H. Nakashima, Y. Umakoshi, A. Arya, U. D. Kulkarni

Philosophical Magazine　2013/02　Research paper (scientific journal)

Development of Artificial Hip Joint with Bone-like Bio-function Fabricated by Electron Beam Melting (EBM)

FUKUDA Hidetsugu, TAKAHASHI Hiroyuki, NAKAGAWA Seiji, NAKASHIMA Yoshio, NAKANO Takayoshi

Materia Japan　Vol. 52　No. 2　p. 74-76　2013/02/01

Analysis of the change in bone quality in the bone surrounding a femoral implant after human artificial hip joint replacement using ultrasound

Vol. 34　p. 123-128　2013

Formation of c-axis-oriented columnar structures through controlled epitaxial growth of hydroxyapatite

Wensi Wang, Yuya Oaki, Chikara Ohtsuki, Takayoshi Nakano, Hiroaki Imai

Journal of Asian Ceramic Societies　Vol. 1　No. 2　p. 143-148　2013　Research paper (scientific journal)

Conditions for osteoblast arrangement induced under long-term cyclic stretching

Aira Matsugaki, Natsuko Fujiwara, Takayoshi Nakano

Materials Transactions　Vol. 54　No. 7　p. 1195-1199　2013　Research paper (scientific journal)

Assessment of the Elastic Properties of Human Femoral Bone with Artificial Hip Joint by Ultrasound Transmission

Ryoichi Suetoshi, Dorian Cretin, Shinji Ogawa, Takayoshi Nakano

BIOCERAMICS 24　Vol. 529-530　p. 321-+　2013　Research paper (international conference proceedings)

Hydrothermal Modification of Products Fabricated by Electron Beam Melting

Hidetsugu Fukuda, Masato Ueda, Masahiko Ikeda, Takayoshi Nakano

BIOCERAMICS 24　Vol. 529-530　p. 580-+　2013　Research paper (international conference proceedings)

Mesenchymal stromal cells improve the osteogenic capabilities of mineralized agarose gels in a rat full-thickness cranial defect model

Norihiko Mizuta, Koji Hattori, Yoshika Suzawa, Soichi Iwai, Tomohiro Matsumoto, Mika Tadokoro, Takayoshi Nakano, Mitsuru Akashi, Hajime Ohgushi, Yoshiaki Yura

JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE　Vol. 7　No. 1　p. 51-60　2013/01　Research paper (scientific journal)

Non-basal slip systems operative in Mg12ZnY long-period stacking ordered (LPSO) phase with 18R and 14H structures

K. Hagihara, Y. Fukusumi, M. Yamasaki, T. Nakano, Y. Kawamura

Materials Transactions　Vol. 54　No. 5　p. 693-697　2013　Research paper (scientific journal)

omega Transformation in cold-worked Ti-Nb-Ta-Zr-O alloys with low body-centered cubic phase stability and its correlation with their elastic properties

M. Tane, T. Nakano, S. Kuramoto, M. Niinomi, N. Takesue, H. Nakajima

ACTA MATERIALIA　Vol. 61　No. 1　p. 139-150　2013/01　Research paper (scientific journal)

国民との対話のための公開講演会「グリーン・ライフイノベーションへの材料研究最前線」を開催して

御手洗 容子, 吉見 享祐, 細田 秀樹, 中野 貴由

まてりあ : 日本金属学会会報　Vol. 52　No. 1　p. 32-35　2013/01/01

β-Phase Instability in Binary Ti-xNb Biomaterial Single Crystals

Pan Wang, Mitsuharu Todai, Takasyoshi Nakano

Materials Transactions　2013/01　Research paper (scientific journal)

Long-period ordered superstructures that appear in an (Al,Ga)-rich (Al,Ga)Ti system

Takayoshi Nakano, Koji Hagihara, Satoshi Hata, Hajime Shigyo, Hideharu Nakashima, Yukichi Umakoshi, Ashok Arya, Ulhas D. Kulkarni

Philosophical Magazine　Vol. 93　No. 1-3　p. 22-37　2013/01/01　Research paper (scientific journal)

材料工学的観点からの骨微細構造の解明と骨配向化誘導

中野 貴由

【ＪＳＰＳ】科研費NEWS　2012/12

Individual mechanical properties of ferrite and martensite in Fe-0.16 mass% C-1.0mass% Si-1.5 mass% Mn steel

K. Hayashi, K. Miyata, F. Katsuki, T. Ishimoto, T. Nakano

Journal of Alloys and Compounds　2012/12　Research paper (scientific journal)

Change in biological apatite orientation in rat long bone by increased mechanical loading

J. Wang, T. Ishimoto, T. Nakano

2012/11

Chronological histological changes during bone regeneration on a non-crosslinked atelocollagen matrix

Ryosuke Kagawa, Mitsunobu Kishino, Sunao Sato, Ken Ishida, Yuzo Ogawa, Kazunori Ikebe, Kaori Oya, Takuya Ishimoto, Takayoshi Nakano, Yoshinobu Maeda, Toshihisa Komori, Satoru Toyosawa

JOURNAL OF BONE AND MINERAL METABOLISM　Vol. 30　No. 6　p. 638-650　2012/11　Research paper (scientific journal)

Biocompatible low Young's modulus achieved by strong crystallographic elastic anisotropy in Ti-15Mo-5Zr-3Al alloy single crystal

S. -H. Lee, M. Todai, M. Tane, K. Hagihara, H. Nakajima, T. Nakano

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS　Vol. 14　p. 48-54　2012/10　Research paper (scientific journal)

：[特集1] 9th World Biomaterials Cogress「Metallic materials for scaffolds」

中野 貴由

バイオマテリアル　2012/10

骨の細胞を整列させる！

中野貴由, 松垣あいら

化学　2012/10

Mechanical properties of porous Ti alloy products fabricated by electron beam melting method

N. Ikeo, T. Matsumi, T. Nakano

Proceedings of PM2012(2012 Powder Metallurgy World Congress),　2012/10　Research paper (international conference proceedings)

Morphology analysis of vertebral trabecular bone under dynamic loading based on multi-scale theory

Khairul Salleh Basaruddin, Naoki Takano, Yuto Yoshiwara, Takayoshi Nakano

MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING　Vol. 50　No. 10　p. 1091-1103　2012/10　Research paper (scientific journal)

The alignment of MC3T3-E1 osteoblasts on steps of slip traces introduced by dislocation motion

Aira Matsugaki, Gento Aramoto, Takayoshi Nakano

Biomaterials　Vol. 33　No. 30　p. 7327-7335　2012/10　Research paper (scientific journal)

Biological apatite (BAp) crystallographic orientation and texture as a new index for assessing the microstructure and function of bone regenerated by tissue engineering

Takayoshi Nakano, Kazuhiro Kaibara, Takuya Ishimoto, Yasuhiko Tabata, Yukichi Umakoshi

BONE　Vol. 51　No. 4　p. 741-747　2012/10　Research paper (scientific journal)

Biocompatible low Young's modulus achieved by strong crystallographic elastic anisotropy in Ti-15Mo-5Zr-3Al alloy single crystal

S. -H. Lee, M. Todai, M. Tane, K. Hagihara, H. Nakajima, T. Nakano

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS　Vol. 14　p. 48-54　2012/10　Research paper (scientific journal)

人工股関節置換後にチタン基インプラントより生じた応力遮蔽にとも なうヒト大腿骨の骨損失および骨質劣化

野山義裕, 三浦拓也, 石本卓也, 池尾直子, 新家光雄, 中野貴由

日本金属学会誌　2012/07　Research paper (scientific journal)

Optimization of Cr content of metastable beta-type Ti-Cr alloys with changeable Young's modulus for spinal fixation applications

Xingfeng Zhao, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda, Takuya Ishimoto, Takayoshi Nakano

ACTA BIOMATERIALIA　Vol. 8　No. 6　p. 2392-2400　2012/07　Research paper (scientific journal)

Characterization of apatite deposited on organic substrates with and without preferential alignment

T. Ishimoto, T. Takeuchi, M. Akashi, J. Watanabe, T. Nakano

2012/06

Development of metallic scaffolds for bone replacement based on orientation degree of biological apatite c-axis in long bone

T. Nakano, T. Ishimoto, N. Ikeo, T. Matsumi, W. Fujitani

2012/06

Osteoblast alignment regulated by stepped surface of a Ti substrate

A. Matsugaki, G. Aramoto, T. Ishimoto, T. Nakano

2012/06

微小領域Ｘ線回折を中心とした材料科学的手法を用いた硬組織配向化機構の解明

中野 貴由

第68回日本顕微鏡学会 発表要旨集　2012/05

Analysis of Biological Apatite Crystal Orientation in Anterior Cortical Bone of Human Mandible Using Microbeam X-ray Diffractometry

Hidetaka Furuya, Satoru Matsunaga, Yuichi Tamatsu, Takayoshi Nakano, Masao Yoshinari, Yoshinobu Ide, Shinichi Abe

MATERIALS TRANSACTIONS　Vol. 53　No. 5　p. 980-984　2012/05　Research paper (scientific journal)

Microstructural and Orientation Dependence of the Plastic Deformation Behavior in beta-type Ti-15Mo-5Zr-3Al Alloy Single Crystals

Sang-Hoon Lee, Koji Hagihara, Takayoshi Nakano

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE　Vol. 43A　No. 5　p. 1588-1597　2012/05　Research paper (scientific journal)

Fabrication and clarification of fatigue properties of nontoxic Ti-15Zr-4Nb-4Ta alloy products by electron beam melting method for biomedical application

H. Fukuda, H. Takahashi, K. Kuramoto, Y. Okazaki, H Yoshikawa, T. Nakano

Japanese Journal of Clinical Biomechanics　Vol. 33　p. 257-263　2012/04　Research paper (scientific journal)

First-principles study on phase stability of MoSi2-NbSi2 pseudobinary alloys

K. Yuge, Y. Koizumi, K. Hagihara, T. Nakano, K. Kishida, H. Inui

Physical Review B　2012/04　Research paper (scientific journal)

Microstructural and orientation dependence of the plastic deformation behavior in beta-type Ti-15Mo-5Zr-3Al alloy single crystals

S-H. Lee, K. Hagihara, T. Nakano

Metallurgical and materials transactions　2012/04　Research paper (scientific journal)

Novel Research Fields Derived from the Study on Intermetallic Compounds : From Green Innovation to Life Innovation

YOSHIMI Kyosuke, HOSODA Hideki, NAKANO Takayoshi

Materia Japan　Vol. 51　No. 4　p. 168-178　2012/04/01

First-principles study on phase stability of MoSi2-NbSi2 pseudobinary alloys

Koretaka Yuge, Yuichiro Koizumi, Koji Hagihara, Takayoshi Nakano, Kyosuke Kishida, Haruyuki Inui

PHYSICAL REVIEW B　Vol. 85　No. 13　2012/04　Research paper (scientific journal)

生体用Ti-Nb合金における特異な物性および弾塑性変形挙動の解明

當代光陽, 中野貴由

グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」平成23年度成果報告書　2012/03　Research paper (bulletin of university, research institution)

Bone Loss and Reduced Bone Quality of the Human Femur after Total Hip Arthroplasty under Stress-Shielding Effects by Titanium-Based Implant

NOYAMA Yoshihiro, MIURA Takuya, ISHIMOTO Takuya, ITAYA Takahiro, NIINOMI Mitsuo, NAKANO Takayoshi

MATERIALS TRANSACTIONS　Vol. 53　No. 3　p. 565-570　2012/03/01　Research paper (scientific journal)

骨質評価X線回折装置R-AXIS BQ「新骨質評価システムの開発」

中野 貴由

「地域イノベーション創出総合支援事業」成果集 JSTイノベーションプラザ・サテライトの成果　2012/02

Effects of a coating resin containing S-PRG filler to prevent demineralization of root surfaces

Sai Ma, Satoshi Imazato, Ji-Hua Chen, Gen Mayanagi, Nobuhiro Takahashi, Takuya Ishimoto, Takayoshi Nakano

Dental Materials Journal　Vol. 31　No. 6　p. 909-915　2012　Research paper (scientific journal)

In vitro reproduction of endochondral ossification using a 3D mesenchymal stem cell construct

Jun-Ichi Sasaki, Takuya Matsumoto, Hiroshi Egusa, Michiya Matsusaki, Akihiro Nishiguchi, Takayoshi Nakano, Mitsuru Akashi, Satoshi Imazato, Hirofumi Yatani

INTEGRATIVE BIOLOGY　Vol. 4　No. 10　p. 1207-1214　2012　Research paper (scientific journal)

The preparation of PLLA/calcium phosphate hybrid composite and its evaluation of biocompatibility

Yoshinosuke Hamada, Wataru Fujitani, Naomasa Kawaguchi, Kiyoshi Daito, Tsutsu Niido, Ayako Uchinaka, Seiji Mori, Yoshihisa Kojima, Masashi Manabe, Kiheiji Nishida, Kenji Arita, Takayoshi Nakano, Nariaki Matsuura

Dental Materials Journal　Vol. 31　No. 6　p. 1087-1096　2012　Research paper (scientific journal)

Quick recovery in preferential orientation of biological apatite and related mechanical function during bone regeneration by running exercise

T. Ishimoto, Y. Yoshida, T. Nakano

Japanese Journal of Clinical Biomechanics　Vol. 33　p. 47-53　2012

Single Crystal Growth and its Microstructure in Co-Cr-Mo alloys for Biomedical Applications

Takayoshi Nakano, Keita Sasaki, Koji Hagihara, Takuya Ishimoto, Yusuke Fujii, Ai Serizawa

THERMEC 2011, PTS 1-4　Vol. 706-709　p. 561-+　2012　Research paper (international conference proceedings)

SOME LONG-PERIOD SUPERSTRUCTURES AND THE RELATED MOTION OF DISLOCATIONS IN Al-RICH TiAl SINGLE CRYSTALS

Takayoshi Nakano, Satoshi Hata, Koutarou Hayashi, Yukichi Umakoshi

TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS PROPERTIES, CHARACTERIZATION, AND MODELING　p. 797-804　2012　Research paper (international conference proceedings)

Effect of Energy Density of Incident Beam on Mechanical Property of Titanium Alloy Products Fabricated by Electron Beam Melting (EBM) Method

Hidetsugu Fukuda, Hiroyuki Takahashi, Koichi Kuramoto, Takayoshi Nakano

THERMEC 2011, PTS 1-4　Vol. 706-709　p. 488-+　2012　Research paper (international conference proceedings)

Fabrication and characterization of porous implant products with aligned pores by EBM method for biomedical application

Naoko Ikeo, Takuya Ishimoto, Hidetsugu Fukuda, Takayoshi Nakano

Advanced Materials Research　Vol. 409　p. 142-145　2012　Research paper (international conference proceedings)

Control of Osteoblastic Cell Behavior by Surface Topography Introduced by Plastic Deformation of Ti Single Crystal with h.c.p. Structure

Aira Matsugaki, Gento Aramoto, Takuya Ishimoto, Takayoshi Nakano

THERMEC 2011, PTS 1-4　Vol. 706-709　p. 549-552　2012　Research paper (international conference proceedings)

Evaluation of Bone Quality in Mandible of Young M-CSF Deficient-Induced Osteopetrotic Mouse

Wataru Fujitani, Jee-Wook Lee, Takayoshi Nakano

THERMEC 2011, PTS 1-4　Vol. 706-709　p. 484-+　2012　Research paper (international conference proceedings)

Regeneration of Bone Mass and Bone Quality around Implant with Grooves for Aligning Bone Cells in Rabbit Hindlimb Bones

Takuya Ishimoto, Kentaro Kawata, Takashi Sakai, Hideki Yoshikawa, Takayoshi Nakano

THERMEC 2011, PTS 1-4　Vol. 706-709　p. 510-+　2012　Research paper (international conference proceedings)

7B34 Evaluation of apatite orientation as a bone quality parameter in regenerative and diseased bone and the related mechanical property.

NAKANO Takayoshi, ISHIMOTO Takuya, SATO Bunji, ANJIKI Takuya, MATSUGAKI Aira

The Proceedings of the Bioengineering Conference Annual Meeting of BED/JSME　Vol. 2012　No. 0　p. _7B34-1_-_7B34-2_　2012

7B42 Morphology analysis of vertebral trabecular bone under static and dynamic responses

YOSHIWARA Yuto, TAKANO Naoki, NAKANO Takayoshi

The Proceedings of the Bioengineering Conference Annual Meeting of BED/JSME　Vol. 2012　No. 0　p. _7B42-1_-_7B42-2_　2012

Development of Novel Artificial Hip Joint Introducing the Oriented Biological Apatite of Newly Formed Bone Around Implant

NOYAMA Yoshihiro, NISHIMURA Naoyuki, KURAMOTO Koichi, YOSHIKAWA Hideki, NAKANO Takayoshi

Materia Japan　Vol. 51　No. 1　p. 19-21　2012/01/01

Alignment of biological apatite crystallites at first molar in human mandible cortical bone

Toshiyuki Morioka, Satoru Matsunaga, Masao Yoshinari, Yoshinobu Ide, Takayoshi Nakano, Hideshi Sekine, Yasutomo Yajima

Cranio - Journal of Craniomandibular Practice　Vol. 30　No. 1　p. 32-40　2012　Research paper (scientific journal)

Low Young's modulus in Ti-Nb-Ta-Zr alloys: Cold working and oxygen effects

M. Tane, T. Nakano, S. Kuramoto, M. Hara, M. Niinomi, N. Takesue, T. Yano, H. Nakajima

Acta Materialia　2011/12　Research paper (scientific journal)

Competitive change in bone mass, bone density, and preferred orientation of biological apatite in unloaded rat femur by sciatic-neurectomy

J. Wang, T. Ishimoto, T. Nakano

Proceedings of ECO-MATES 2011　2011/11　Research paper (international conference proceedings)

Fabrication of three dimensional Ti-6Al-4V structures by EBM method

N. Ikeo, T. Ishimoto, T. Nakano

Proceedings of ECO-MATES 2011　2011/11　Research paper (international conference proceedings)

Zirconia-hydroxyapatite composite material with micro porous structure

Takuya Junior Matsumoto, Sang-Hyun An, Takuya Ishimoto, Takayoshi Nakano, Takuya Matsumoto, Satoshi Imazato

DENTAL MATERIALS　Vol. 27　No. 11　p. E205-E212　2011/11　Research paper (scientific journal)

Prediction of macroscopic properties of vertebral trabecular bone and comparison with Keyak's model

K.S.Basaruddin, Y.Yoshiwara, N.Takano, T.Nakano, T.Ishimoto

2011/11　Research paper (scientific journal)

Low Young&apos;s modulus in Ti-Nb-Ta-Zr-O alloys: Cold working and oxygen effects

M. Tane, T. Nakano, S. Kuramoto, M. Hara, M. Niinomi, N. Takesue, T. Yano, H. Nakajima

ACTA MATERIALIA　Vol. 59　No. 18　p. 6975-6988　2011/10　Research paper (scientific journal)

Low Young&apos;s modulus in Ti-Nb-Ta-Zr-O alloys: Cold working and oxygen effects

M. Tane, T. Nakano, S. Kuramoto, M. Hara, M. Niinomi, N. Takesue, T. Yano, H. Nakajima

ACTA MATERIALIA　Vol. 59　No. 18　p. 6975-6988　2011/10　Research paper (scientific journal)

Mesenchymal stromal cells improve the osteogenic capabilities of mineralized agarose gels in a rat full-thickness cranial defect model

N.Mizuta, K.Hattori, Y.Suzawa, S.Iwai, T.Nakano, M.Akashi, H.Ohgushi, Y.Yura

Journal of Tissue Engineering and Regenerative Medicine　2011/08　Research paper (scientific journal)

Fracture behavior and toughness of NbSi2-based single-crystals and MoSi2(C11b)/NbSi2(C40) duplex crystals with a single set of lamellae

K.Hagihara, T.Nakano

Acta Materialia　2011/08　Research paper (scientific journal)

Development of high Zr-containing Ti-based alloys with low Young's modulus for use in removable implants

X.Zhao, M.Niinomi, M.Nakai, T.Ishimoto, T.Nakano

Materials Science and Engineering C　2011/07　Research paper (scientific journal)

Plastic Deformation Behavior of Mg12ZnY LPSO-Phase with 14H-Typed Structure

K. Hagihara, Y. Sugino, Y. Fukusumi, Y. Umakoshi, T. Nakano

MATERIALS TRANSACTIONS　Vol. 52　No. 6　p. 1096-1103　2011/06　Research paper (scientific journal)

Fracture behavior and toughness of NbSi2-based single crystals and MoSi2(C11b )/NbSi2(C40) duplex crystals with a single set of lamellae

K. Hagihara, T. Nakano

Acta Materialia　2011/04　Research paper (scientific journal)

Numerical Study on the Morphology and Mechanical Role of Healthy and Osteoporotic Vertebral Trabecular Bone

K.S.Basaruddin, Y.Yoshiwara, N.Takano, T.Nakano

Vol. 2011　No. 17　p. 289-290　2011/04　Research paper (scientific journal)

Biomechanical Evaluation of Regenerated Long Bone by Nanoindentation

T.Ishimoto, T.Nakano, M.Yamamoto, Y.Tabata

Journal of Materials Science: in Medicine　2011/04　Research paper (scientific journal)

ナノ組織制御による先進構造材料・生体再建用構造材料の開発と信頼性評価

中野貴由, 石本卓也

グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」平成22年度成果報告書　2011/03

生体内外でのアパタイト配向性形成メカニズムの解明

石本卓也, 中野貴由

グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」平成22年度成果報告書　2011/03

Design and fabrication of porous metal implants with a through-hole aligned along bone axis for bone replacement from the perspective of preferential arrangement of apatite crystallites as a bone quality parameter

Japanese journal of clinical biomechanics　Vol. 32　p. 1-8　2011　Research paper (scientific journal)

Monte Carlo simulation of antiphase boundaries and growth of antiphase domains in Al5Ti3 phase in Al-rich gamma-TiAl intermetallics

U. D. Kulkarni, S. Hata, T. Nakano, M. Mitsuhara, K. Ikeda, H. Nakashima

PHILOSOPHICAL MAGAZINE　Vol. 91　No. 22　p. 3068-3078　2011　Research paper (scientific journal)

Formation of New Bone with Preferentially Oriented Biological Apatite Crystals Using a Novel Cylindrical Implant Containing An isotropic Open Pores Fabricated by the Electron Beam Melting (EBM) Method

Takayoshi Nakano, Wataru Fujitani, Takuya Ishimoto, Jee-Wook Lee, Naoko Ikeo, Hidetsugu Fukuda, Kouichi Kuramoto

ISIJ INTERNATIONAL　Vol. 51　No. 2　p. 262-268　2011　Research paper (scientific journal)

生体細胞・組織配向化ゼブラメタルの開発

石本卓也, 中野貴由

財団法人池谷科学技術振興財団 平成21年度単年度研究助成報告書(? 0211068-A)　2010/12

Effects of Cr-addition and lamellar microstructure on the oxidation behavior of single crystal (Mo0.85Nb0.15)Si2

O.Zhu, L.Zhang, J.Yu, A.Shan, J.Wu, K.Hagihara, T.Nakano

Journal of Alloys of compounds　2010/12　Research paper (scientific journal)

Reduction in densification temperature by TiB2 addition during sintering of oxides

M.Ito, N.Hasegawa, T.Nakano

Journal of Physics: Conference Series　2010/12　Research paper (scientific journal)

Low Young&apos;s modulus of Ti-Nb-Ta-Zr alloys caused by softening in shear moduli c &apos; and c(44) near lower limit of body-centered cubic phase stability

M. Tane, S. Akita, T. Nakano, K. Hagihara, Y. Umakoshi, M. Niinomi, H. Mori, H. Nakajima

ACTA MATERIALIA　Vol. 58　No. 20　p. 6790-6798　2010/12　Research paper (scientific journal)

Formation and development of C40/C11(b) lamellar structure in NbSi2/MoSi2 crystals

O. Zhu, L. T. Zhang, J. X. Yu, A. D. Shan, J. S. Wu, T. Nakano

INTERMETALLICS　Vol. 18　No. 12　p. 2328-2332　2010/12　Research paper (scientific journal)

Efficacy of polyphasic calcium phosphates as a direct pulp capping material

Kiba W, Imazato S, Takahashi Y, Yoshioka S, Ebisu S, Nakano T

Journal of Dentistry　2010/10　Research paper (scientific journal)

電子ビーム積層造形法により形成された新規指向性ポーラス型インプラントによる骨配向化誘導

中野貴由, 藤谷渉, 石本卓也, 李志旭, 池尾直子, 福田英次, 藏本孝一

鉄と鋼　Vol. 96　No. 9　p. 572-578　2010/09　Research paper (scientific journal)

Structure and Mechanical Properties of Melt-Extracted Beta-Ti-Type Ti-Nb-Ta-Zr (TNTZ) Wire with High Bending Ductility

NAGASE Takeshi, NAKANO Takayoshi, UMAKOSHI Yukichi, NIINOMI Mitsuo

Journal of the Japan Institute of Metals and Materials　Vol. 74　No. 8　p. 515-519　2010/08/01　Research paper (scientific journal)

Effect of Calcium Ion Concentrations on Osteogenic Differentiation and Hematopoietic Stem Cell Niche-Related Protein Expression in Osteoblasts

Shinya Nakamura, Takuya Matsumoto, Jun-Ichi Sasaki, Hiroshi Egusa, Kuen Yong Lee, Takayoshi Nakano, Taiji Sohmura, Atsushi Nakahira

TISSUE ENGINEERING PART A　Vol. 16　No. 8　p. 2467-2473　2010/08　Research paper (scientific journal)

Improvement of aligned lamellar structure by Cr-addition to NbSi2/MoSi2 duplex-silicide crystals

K.Hagihara, T.Nakano, S.Hata, O.Zhu, Y.Umakoshi

2010/08　Research paper (scientific journal)

Regenerative behavior of biomineral/agarose composite gels as bone grafting materials in rat cranial defects

Yoshika Suzawa, Takafumi Funaki, Junji Watanabe, Soichi Iwai, Yoshiaki Yura, Takayoshi Nakano, Yukichi Umakoshi, Mitsuru Akashi

Journal of Biomedical Materials Research - Part A　Vol. 93　No. 3　p. 965-975　2010/06/01　Research paper (scientific journal)

Proliferation and osteogenic differentiation of rat bone marrow stromal cells on bioapatite with different crystalline facets

Norihisa Ichinohe, Takayoshi Nakano, Toshihiro Mitaka, Yukichi Umakoshi, Yasuhiko Tabata

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A　Vol. 93A　No. 2　p. 646-655　2010/05　Research paper (scientific journal)

Improvement of aligned lamellar structure by Cr-addition to NbSi2/MoSi2 duplex-silicide crystals

K.Hagihara, T.Nakano, S.Hata, O.Zhu, Y.Umakoshi

Scripta materialia　2010/05　Research paper (scientific journal)

Changes in bone quality and quantity in recombinant human macrophage colony-stimulating factor-treated osteopetrotic(op/op) mice

J.-W.Lee, T.Nakano

Materials Science Forum　2010/05　Research paper (scientific journal)

Plastic deformation behavior of Ni3(Ti0.7Nb0.3) single crystals with D019 structure

K.Hagihara, H.Fujimoto, T.Nakano, Y.Umakoshi

Intermetallics　2010/05　Research paper (scientific journal)

Analysis of Biological Apatite Orientation in Rat Mandibles

NAGISA Noriko, NAKANO Takayoshi, HASHIGUCHI Norihiro, FUJITANI Wataru, UMAKOSHI Yukichi, SHIMAHARA Masashi

Oral Science International　Vol. 7　No. 1　p. 19-25　2010/05/01　Research paper (scientific journal)

生体骨代替インプラントの最適形状設計

中野貴由, 李志旭, 石本卓也, Y.T. Hyun, S.E. Kim

グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」平成21年度成果報告書　2010/03

透過光学系を用いた骨生体アパタイト配向性解析法の確立

石本卓也, 中野貴由

グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」平成21年度成果報告書　2010/03

The influence of the antibacterial monomer 12-methacryloyloxydodecylpyridinium bromide on the proliferation, differentiation and mineralization of odontoblast-like cells

Mariko Nishida, Satoshi Imazato, Yusuke Takahashi, Shigeyuki Ebisu, Takuya Ishimoto, Takayoshi Nakano, Yoshiyuki Yasuda, Takashi Saito

BIOMATERIALS　Vol. 31　No. 7　p. 1518-1532　2010/03　Research paper (scientific journal)

In vitro engineering of transitional tissue of pattering and functional control of cells in fibrin gel

J.Sasaki, T.Matsumoto, H.Egusa, T.Nakano, T.Ishimoto, T.Sohmura, H.Yatani

2010/02　Research paper (scientific journal)

Fabrication of Beta-Ti-Type Ti-Nb-Ta-Zr (TNTZ) Wire with High-Ductility by Arc-Melt-Type Melt-Extraction Method

Takeshi Nagase, Takayoshi Nakano, Yukichi Umakoshi, Mitsuo Niinomi

MATERIALS TRANSACTIONS　Vol. 51　No. 2　p. 377-380　2010/02　Research paper (scientific journal)

2113 Effect of intervertebral disc degeneration on cancellous bone remodeling in vertebral body : Computer simulation study

Minami Takanobu, ADACHI Taiji, HOJO Masaki, NAKANO Takayoshi

The Proceedings of The Computational Mechanics Conference　Vol. 2010　No. 0　p. 288-289　2010

Cell-based fabrication of organic/inorganic composite gel material

Takuya Matsumoto, Ami Mizuno, Miki Kashiwagi, Shin-Suke Yoshida, Jun-Ichi Sasaki, Takayoshi Nakano

Materials　Vol. 4　No. 1　p. 327-338　2010　Research paper (scientific journal)

Change in Biological Apatite Orientation in Beagle Mandible

Wataru Fujitani, Takayoshi Nakano

PRICM 7, PTS 1-3　Vol. 654-656　p. 2216-2219　2010　Research paper (international conference proceedings)

Quantity and Quality of Regenerated Bone in Grooves Aligned at Different Angles from the Implant Surface

Yoshihiro Noyama, Takuya Ishimoto, Koichi Kuramoto, Takashi Sakai, Hideki Yoshikawa, Takayoshi Nakano

PRICM 7, PTS 1-3　Vol. 654-656　p. 2241-+　2010　Research paper (international conference proceedings)

Evaluation of Mechanical Properties of Regenerated Bone by Nanoindentation Technique

Takuya Ishimoto, Takayoshi Nakano

PRICM 7, PTS 1-3　Vol. 654-656　p. 2220-2224　2010　Research paper (international conference proceedings)

Evaluation and Control of Crystallographic Alignment of Biological Apatite Crystallites in Bones

Takayoshi Nakano, Takuya Ishimoto, Jee-Wook Lee, Sayaka Miyabe, Naoko Ikeo, Hidetsugu Fukuda

PRICM 7, PTS 1-3　Vol. 654-656　p. 2212-+　2010　Research paper (international conference proceedings)

Proliferation and differentiation potential of pluripotent mesenchymal precursor C2C12 cells on resin-based restorative materials

Satoshi Imazato, Daisuke Horikawa, Kahoru Takeda, Wakako Kiba, Naomi Izutani, Ranna Yoshikawa, Mikako Hayashi, Shigeyuki Ebisu, Takayoshi Nakano

Dental Materials Journal　Vol. 29　No. 3　p. 341-346　2010　Research paper (scientific journal)

Synthesis of Hydroxyapatite Contining Manganese and Its Evaluation of Biocompatibility

W.Fujitani, Y.Hamada, N.Kawaguchi, S.Mori, K.Daito, A.Uchinaka, T.Matsumoto, Y.Kojima, M.Daito, T.Nakano, N.Matsuura

Nano Bio Medicine　Vol. 2　No. 1　p. 37-46　2010/01　Research paper (scientific journal)

BONE REGENERATION BASED ON ORIENTATION OF BIOLOGICAL APATITE (BAp) C-AXIS IN OSTEOPETROTIC (op/op) MICE

Jee-Wook Lee, Keita Kawahara, Takayoshi Nakano

THERMEC 2009, PTS 1-4　Vol. 638-642　p. 588-593　2010　Research paper (international conference proceedings)

Preparation of Ti-based and Zr-based bio-metallic wires by arc-melting type melt-extraction method

Takeshi Nagase, Koichi Kinoshita, Takayoshi Nakano, Yukichi Umakoshi, Mituo Niinomi

THERMEC 2009, PTS 1-4　Vol. 638-642　p. 2127-+　2010　Research paper (international conference proceedings)

Orientation of Biological Apatite in Rat Calvaria Analyzed by Microbeam X-Ray Diffractometer

Takuya Ishimoto, Tatsushi Sakamoto, Takayoshi Nakano

THERMEC 2009, PTS 1-4　Vol. 638-642　p. 576-581　2010　Research paper (international conference proceedings)

Stress Simulation and Related Bone Ingrowth in Grooves on Implant Surface

Yoshihiro Noyama, Noriyuki Nagayama, Takuya Ishimoto, Koichi Kuramoto, Takashi Sakai, Hideki Yoshikawa, Takayoshi Nakano

THERMEC 2009, PTS 1-4　Vol. 638-642　p. 664-+　2010　Research paper (international conference proceedings)

マルチスケール応力解析によるヒト椎体海綿骨の力学的評価

田原大輔, 高野直樹, 安達泰治, 中野貴由

骨形態計測学会誌　2010/01　Research paper (scientific journal)

Controlling factors on the fatigue behaviour of Ti-Nb-Ta-Zr alloys single crystals

K.Hagihara, T.Nakano, M.Niinomi

Proc. of PFAM 18 (Processing and Fabrication of Advanced Materials　2009/12　Research paper (international conference proceedings)

Controlling factors on the fatigue behaviour of Ti-Nb-Ta-Zr alloys single crystals

K.Hagihara, M.Niinomi, T.Nakano

Proc. of PFAM 18 (Processing and Fabrication of Advanced Materials　2009/12　Research paper (international conference proceedings)

Anisotropic Biological Apatite Orientation as a Bone Quality Parameter in Bone

T.Nakano, T.Ishimoto, S.Miyabe, J.-W.Lee

2009/12　Research paper (international conference proceedings)

Analysis and formation mechanism of biological apatite(BAp) orientation in a growing rat skull model

T.Sakamoto, T.Ishimoto, T.Nakano

2009/12　Research paper (international conference proceedings)

Organic/inorganic composite material synthesized with osteoblastic cells

T.Matsumoto, A.Mizuno, M.Okazaki, T.Nakano, T.Sohmura

2009/12　Research paper (international conference proceedings)

Oxygen Distribution in Titanium Single Crystal Fabricated by Optical Floating-Zone Method under Extremely Low Oxygen Partial Pressure

Koji Hagihara, Takahiro Tachibana, Keita Sasaki, Yoshiyuki Yoshida, Naoki Shirakawa, Tohru Nagasawa, Takayuki Narushima, Takayoshi Nakano

MATERIALS TRANSACTIONS　Vol. 50　No. 12　p. 2709-2715　2009/12　Research paper (scientific journal)

生体硬組織におけるアパタイトナノ結晶の結晶方位配向化

谷川昌弘, 波多聰, 池田賢一, 中島英治, 石本卓也, 中野貴由

九大HVEM報告書　2009/11　Research paper (bulletin of university, research institution)

ミネラルの質を規定するアパタイトの配向性と骨コラーゲン

中野貴由, 石本卓也

腎と骨代謝　2009/07

生体アパタイト配向性による骨質評価

中野貴由

臨床整形外科　2009/06

微小領域X線回折法を用いたアパタイト配向性に基づく骨の質的評価とその応用

中野貴由, 石本卓也

日本機械学会材料力学部門ニュースレター　2009/06

Fabrication of Ti-Zr Binary Metallic Wire by Arc-Melt-Type Melt-Extraction Method

Takeshi Nagase, Koichi Kinoshita, Takayoshi Nakano, Yukichi Umakoshi

MATERIALS TRANSACTIONS　Vol. 50　No. 4　p. 872-878　2009/04　Research paper (scientific journal)

生体硬組織におけるアパタイト ナノ結晶の結晶方位配向化 九大HVEM報告書

谷川昌弘, 波多聰, 池田賢一, 中島英治, 総理, 石本卓也, 中野貴由

2009/03

Preferential orientation of biological apatite in normal and osteoporotic human vertebral trabeculae

S. Miyabe, T. Ishimoto, T. Nakano

Journal of Physics: Conference Series　Vol. 165　2009　Research paper (international conference proceedings)

Changes in bone microstructure and toughness during the healing process of long bones

T. Ishimoto, T. Nakano, Y. Umakoshi, Y. Tabata

Journal of Physics: Conference Series　Vol. 165　2009　Research paper (international conference proceedings)

Adaptation of BAp crystal orientation to stress distribution in rat mandible during bone growth

T. Nakano, W. Fujitani, T. Ishimoto, Y. Umakoshi

Journal of Physics: Conference Series　Vol. 165　2009　Research paper (international conference proceedings)

Single-crystal growth and plastic deformation behaviour of a Ti-15Mo-5Zr-3Al alloy for biomedical application

S. H. Lee, K. Hagihara, M. H. Oh, T. Nakano

Journal of Physics: Conference Series　Vol. 165　2009　Research paper (international conference proceedings)

Fabrication of Titanium Single Crystal by a Floating Zone Method under Extremely Low Oxygen Partial Pressure

HAGIHARA Koji, TACHIBANA Takahiro, SASAKI Keita, YOSHIDA Yoshiyuki, SHIRAKAWA Naoki, NAGASAWA Tohru, NARUSHIMA Takayuki, NAKANO Takayoshi

Journal of the Japan Institute of Metals　Vol. 72　No. 12　p. 928-934　2008/12/01　Research paper (scientific journal)

チタンのユビキタス化戦略

新家光雄, 塙 隆夫, 池田勝彦, 千葉昌彦, 古原 忠, 成島尚之, 土谷浩一, 江村 聡, 中野貴由, 竹中俊英

2008/12

骨質を考慮した推体海綿骨の高分解ミクロ応力解析

田原大輔, 安達泰治, 高野直樹, 中野貴由

日本臨床バイオメカニクス学会誌　2008/11　Research paper (scientific journal)

各分野別の発表動向：金属材料

中野貴由

バイオマテリアル　2008/09

The evaluation of preferential alignment of biological apatite (BAp) crystallites in bone using transmission X-ray diffraction method

K. Sasaki, T. Sasaki, T. Nakano, Y. Umakoshi, J. D. Ferrara

Advance in X-ray Analysis　2008/09　Research paper (international conference proceedings)

Effect of spatial design and thermal oxidation on apatite formation on Ti-15Zr-4Ta-4Nb alloy

A. Sugino, C. Ohtsuki, K. Tsuru, S. Hayakawa, T. Nakano, Y. Okazaki, A. Osaka

Acta Biomaterialia　2008/09　Research paper (scientific journal)

New Technique for Evaluation of Preferential Alignment of Biological Apatite (BAp) Crystallites in Bone Using Transmission X-ray Diffractometry

Katsunari Sasaki, Takayoshi Nakano, Joseph D. Ferrara, Jee-Wook Lee, Toshihiko Sasaki

MATERIALS TRANSACTIONS　Vol. 49　No. 9　p. 2129-2135　2008/09　Research paper (scientific journal)

Peculiar elastic behavior of Ti-Nb-Ta-Zr single crystals

M. Tane, S. Akita, T Nakano, K. Hagihara, Y. Umakoshi, M. Niinomi, H. Nakajima

Acta Materialia　2008/09　Research paper (scientific journal)

透過型光学系を有する微小域X線回折法を用いたc-fosノックアウトマウス大腿骨の骨質解析

石本 卓也, 嵐 文隆, 中野 貴由, 馬越 佑吉, 宇田川 信之, 中村 美どり

日本骨形態計測学会雑誌　Vol. 18　No. 2　p. S77-S77　2008/07

Peculiar elastic behavior of Ti-Nb-Ta-Zr single crystals

M. Tane, S. Akita, T. Nakano, K. Hagihara, Y. Umakoshi, M. Niinomi, H. Nakajima

ACTA MATERIALIA　Vol. 56　No. 12　p. 2856-2863　2008/07　Research paper (scientific journal)

Effects of antiphase domains on dislocation motion in Ti3Al single crystals deformed by prism slip

K. Koizumi, Y. Minamino, T Nakano, Y. Umakoshi

Philosophical Magazine　2008/07　Research paper (scientific journal)

材料工学的手法による再生骨力学機能の解析

石本卓也, 中野貴由, 馬越佑吉

グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」平成19年度成果報告書　2008/03

再生硬組織の骨質評価ならびに変形・破壊機構の解明

馬越佑吉, 石本卓也, 中野貴由

グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」平成19年度成果報告書　2008/03

骨質評価に向けたバイオメカニクス・シミュレーションの現状と展望

高野直樹, 中野貴由

CLINICAL CALCIUM　2008/03

結晶工学的アプローチによる正常・疾患・再生硬組織の骨質評価

中野貴由

全国大学・歯学部附属病院診療放射線技師連絡協議会誌　2008/03

Effects of antiphase domains on dislocation motion in Ti3Al single crystals deformed by prism slip

Y. Koizumi, Y. Minamino, T. Nakano, Y. Umakoshi

PHILOSOPHICAL MAGAZINE　Vol. 88　No. 4　p. 465-488　2008/02　Research paper (scientific journal)

Preferential orientation of biological apatite crystallite in original, regenerated and diseased cortical bones

Takayoshi Nakano, Takuya Ishimoto, Jee-Wook Lee, Yukichi Umakoshi

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN　Vol. 116　No. 1350　p. 313-315　2008/02　Research paper (scientific journal)

大理石骨病（op/op）マウスの大腿骨骨幹中央断面部での生体アパタイト結晶の配向性分布

李志旭, 中野貴由, 豊澤悟, 田畑泰彦, 馬越佑吉

日本金属学会誌　Vol. 72　No. 2　p. 85-90　2008/02　Research paper (scientific journal)

透過型光学系を有する微小領域X線回折法によるヒト海綿骨内生体アパタイト配向性の2次元定量解析

宮部さやか, 中野貴由, 石本卓也, 高野直樹, 安達泰治, 岩城啓好, 小林章郎, 高岡邦夫, 馬越佑吉

日本金属学会誌　Vol. 72　No. 1　p. 57-62　2008/01　Research paper (scientific journal)

Alendronate treatment promotes bone formation with a less anisotropic microstructure during intramembranous ossification in rats

Masafumi Kashii, Jun Hashimoto, Takayoshi Nakano, Yukichi Umakoshi, Hideki Yoshikawa

JOURNAL OF BONE AND MINERAL METABOLISM　Vol. 26　No. 1　p. 24-33　2008/01　Research paper (scientific journal)

Fabrication and Plastic Deformation Behavior of Lamellar Ti-rich TiAl Crystals with Lotus-Type Aligned Pores

T. Nakano, T. Tachibana, K. Hagihara, Y. Umakoshi, T. Ide, M. Tane, H. Nakajima

POROUS METALS AND METALLIC FOAMS: METFOAM 2007　p. 213-+　2008　Research paper (international conference proceedings)

Two-dimensional quantitative analysis of preferential alignment of biological apatite c-axis for isolated human trabecular bone using microbeam X-ray diffractometer with a transmission optical system

Sayaka Miyabe, Takayoshi Nakano, Takuya Ishimoto, Naoki Takano, Taiji Adachi, Hiroyoshi Iwaki, Akio Kobayashi, Kunio Takaoka, Yukichi Umakoshi

JOURNAL OF THE JAPAN INSTITUTE OF METALS　Vol. 72　No. 1　p. 57-62　2008/01　Research paper (scientific journal)

Orientation Dependence of New Bone Formation in Teflon Implant with an Elongated Pore

T. Nakano, T. Kan, T. Ishimoto, H. Nakajima, Y. Umakoshi

Abstract of 1st Asian Biomaterials Congress (1st ABMC)　2007/12

Analysis of Bone Quality of Tissue-Engineered Bone and Its Correlation to Young’s Modulus

T. Ishimoto, T. Nakano, Y. Umakoshi, M. Yamamoto, Y. Tabata

Abstract of 1st Asian Biomaterials Congress (1st ABMC)　2007/12

海綿骨のμCT立体構造モデル構築とアパタイト配向性に基づく弾性異方性を考慮した応力解析

中野貴由, 高野直樹, 安達泰治, 馬越佑吉

まてりあ　2007/12

骨粗鬆症ラットモデルを用いた骨量・骨質評価

宮部 さやか, 中野 貴由, 馬越 佑吉, 柏井 将文, 橋本 淳, 吉川 秀樹

日本バイオマテリアル学会大会予稿集　Vol. 29回　p. 129-129　2007/11

Crystal Growth and Plastic Deformation Behavior of Ti-29Nb-13Ta-4.6Zr Bcc-based Single Crystal, Ti-2007 Science and Technology

T. Nakano, K. Hagihara, H. Maki, Y. Umakoshi, M. Niinomi

The Japan Institute of Metals　2007/10　Research paper (international conference proceedings)

Microstructure and deformation behavior of lamellar Ti-rich TiAl crystal with lotus-type aligned pores

T. Nakano, T.Tachibana, K. Hagihara, Y. Umakoshi, T.Ide,M.Tane, H.Nakajima

Materials Science Forum　2007/10　Research paper (scientific journal)

BAp Orientation Analysis in Original, Regenerated and Pathological Bone Tissue

T. Nakano, T. Ishimoto, J.-W. Lee, Y. Umakoshi

Proceedings of the 7th Asian BioCeramics Symposium (ABC2007) in Archieves of BioCeramics Research　2007/09　Research paper (international conference proceedings)

力学的性質：金属バイオマテリアルの内部構造と強度

中野貴由

バイオマテリアル　2007/08

Crystal growth and plastic deformation behavior of Ti-29Nb-13Ta-4.6Zr bcc-based single crystal

T. Nakano, K. Hagihara, H. Maki, Y. Umakoshi, M. Niinomi

Proc. Ti-2007 JIMIC5 (Science and Technnology)　2007/06　Research paper (international conference proceedings)

Effect of bcc-phase stability on cyclic deformation behavior in beta-type Ti-Nb-Ta-Zr alloys single crystals with different Nb content

K. Hagihara, T. Nakano, A. Sonoura, K. Watanabe, Y. Umakoshi, M. Niinomi

Proc. in Ti-2007　2007/06　Research paper (international conference proceedings)

生体硬組織の高分解能イメージベース・シミュレーション

高野直樹, 中野貴由, 馬越佑吉, 安達泰治, 田原大輔

まてりあ　2007/04

:Overview Based on Complied Statistics

Mishima Yoshinao, Inui Haruyuki, Takeyama Masao, Takanashi Kouki, Nakatani Ryoichi, Miura Seiji, Yoshimi Kyousuke, Hosoda Hideki, Nakano Takayoshi, Kimura Yoshisato, Yasuda Hiroyuki, Hata Satoshi

Bulletin of the Japan Institute of Metals　Vol. 46　No. 4　p. 278-283　2007/04

再生骨力学機能の、材料・構造パラメータによる解析

石本卓也, 中野貴由, 馬越佑吉

21世紀COEプログラム「構造・機能先進材料デザイン研究拠点の形成」平成18年度成果報告書　2007/03

骨質の新指標－アパタイトの配向性と力学機能－

中野貴由

Osteoporosis Japan　2007/03

生体材料最適形状設計のための金属インプラント周囲ならびに一方向性孔内部に導入される新生骨の骨質評価

石本卓也, 中野貴由, 寒知子, 大橋芳夫, 藤谷渉, 馬越佑吉, 服部友一, 樋口裕一, 多根正和, 中嶋英雄

日本金属学会誌　Vol. 71　No. 4　p. 432-438　2007/03　Research paper (scientific journal)

Special Issue on Smart and Harmonic Biomaterials, PREFACE

H.Hosoda, T. Nakano, T.Narushima, T.Hanawa, M.Niinomi, S.Miyazaki

Materials Transactions　Vol. 48　No. 3　p. 277-277　2007/02

Microstructure of Ti-24Nb-3Al Melt-Spun Ribbon

Yu Yamamoto, Tomonari Inamura, Hideki Hosoda, Kenji Wakashima, Shuichi Miyazaki, Sadahiro Tsurekawa, Takayoshi Nakano, Yukichi Umakoshi

Ti-2007 - Proceedings of the 11th World Conference on Titanium　Vol. 2　p. 1529-1532　2007　Research paper (international conference proceedings)

Microstructure and deformation behavior of lamellar Ti-rich TiAl crystal with lotus-type aligned pores

Takayoshi Nakano, Takahiro Tachibana, Koji Hagihara, Yukichi Umakoshi, Takuya Ide, Masakazu Tane, Hideo Nakajima

PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3　Vol. 561-565　p. 383-+　2007　Research paper (international conference proceedings)

EVALUATION OF BAp ORIENTATION USING MOUSE MODELS FOR OSTEOPOROSIS (OPG-KO) AND OSTEOPETROSIS (op/op)

Jee-Wook Lee, Takayoshi Nakano, Satoru Toyosawa, Yasuhiko Tabata, Yukichi Umakoshi

ADVANCED MATERIALS AND PROCESSING　Vol. 26-28　p. 761-+　2007　Research paper (international conference proceedings)

Change in material and structural parameters of bone mechanical function during long-bone regeneration

Takuya Ishimoto, Takayoshi Nakano, Yukichi Umakoshi, Masaya Yamamoto, Yasuhiko Tabata

PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3　Vol. 561-565　p. 1451-+　2007　Research paper (international conference proceedings)

Effects of the anisotropy of the anti-phase boundary energy on the yield-stress anomaly in Ni3X compounds with close-packed crystal structures

K. Hagihara, T. Tanaka, T. Nakano, P. Veyssiere, Y. Umakoshi

PHILOSOPHICAL MAGAZINE LETTERS　Vol. 87　No. 10　p. 705-712　2007　Research paper (scientific journal)

Variation in bone quality during regenerative process

Takayoshi Nakano, Takuya Ishimoto, Yukichi Umakoshi, Yasuhiko Tabata

THERMEC 2006, PTS 1-5　Vol. 539-543　p. 675-+　2007　Research paper (international conference proceedings)

Microscopic properties of long-period ordering in Al-rich TiAl alloys

S. Hata, T. Nakano, N. Kuwano, M. Itakura, S. Matsumura, Y. Umakoshi

Metallugical Materials Transaction A　Vol. 39A　No. 7　p. 1610-1617　2007/01　Research paper (scientific journal)

結晶工学的手法による骨質評価と結晶配向に基づくバイオマテリアルの設計

中野貴由

Vol. 25　No. 2　p. 112-122　2007/01

生体アパタイトの配向性に基づく骨再生過程の解明と組織再生誘導のための生体材料設計

中野貴由, 田畑泰彦, 馬越佑吉

金属　2007/01

Areal distribution of preferential alignment of biological apatite (BAp) crystallite on cross-section of center of femoral diaphysis in osteopetrotic (op /op) mouse

Jee-Wook Lee, T. Nakano, S. Toyosawa, Y. Tabata, Y. Umakoshi

Materials Transactions　Vol. 72　No. 2　p. 85-90　2007/01　Research paper (scientific journal)

Effect of C11(b)-Stabilized element on deformation mode in C40-type (Nb1-xMox)Si-2 (x=0-0.85) single crystals

Takayoshi Nakano, Koji Hagihara, Yukichi Umakoshi

ADVANCED INTERMETALLIC-BASED ALLOYS　Vol. 980　p. 297-+　2007　Research paper (international conference proceedings)

New Parameter for Bone Quality

T.Nakano, Y.Umakoshi

The Japan Journal　Vol. 3　No. 8　p. 29-29　2006/12

アパタイト・ナノ結晶配向を利用した新たな臨床用硬組織評価・診断法の開発

中野貴由

FOCUS NEDO　2006/12

骨組織における生体アパタイト結晶の配向性とその力学機能

中野貴由, 馬越佑吉

生体医工学　2006/12

Long-period ordering in Al-rich TiAl single crystals with gradient compositions

I.Sugimoto, S.Hata, M.Itakura, N.Kuwano, T.Nakano, Y.Umakoshi

Proceedings of The 13th National Symposium on Phase Diagrams　2006/12

口腔内自動骨延長器の開発：ビーグル犬下顎骨への適用

勝部朝之, 成島尚之, 中野貴由, 馬越佑吉, 佐々木具文, 伊藤秀美, 古屋泰文, 川村仁

第6回バイオメカニクス論文集　2006/12　Research paper (scientific journal)

Microscopic properties of long-period ordering in Al-Ti alloys

S.Hata, T.Nakano, N.Kuwano, M.Itakura, S.Matsumura, Y.Umakoshi

2006/11

Effect of C11b-Stabilized Element on Deformation Mode in (Nb1-x,Mox)Si2(X=0-0.85)Single Crystals

T.Nakano, K.Hagihara, Y.Umakoshi

2006/11　Research paper (international conference proceedings)

Preferential Alignment of Biological Apatite Crystallites and the Related Mechanical Function in Original, Regenerated and Pathological Hard Tissues

T. Nakano, Y. Umakoshi

Proceedings of The 2nd Korea-Japan Joint Workshop on Biomedical Materials　2006/10

Multi-Scale Stress Analysis of Trabecular Bone Considering Trabeculae Morphology and Biological Apatite Crystallite Orientation

Mitsuhiro Kawagai, Naoki Takano, Takayoshi Nakano, Mitsuteru Asai

Vol. 55　No. 9　p. 874-880　2006/09　Research paper (scientific journal)

Evaluation of Bone Quality near Metallic Implants with and without Lotus-Type Pores for Optimal Biomaterial Design

T. Nakano, T. Kan, T. Ishimoto, Y. Ohashi, W. Fujitani, Y. Umakoshi, T. Hattori, Y. Higuchi, M. Tane, H. Nakajima

Materials Transaction　Vol. 71　No. 4　p. 432-438　2006/09　Research paper (scientific journal)

膜性骨化で形成される骨基質に対するアレンドロネートの影響

柏井 将文, 橋本 淳, 中野 貴由, 馬越 佑吉, 吉川 秀樹

日本整形外科学会雑誌　Vol. 80　No. 8　p. S1100-S1100　2006/08

膜性骨化の過程においてビスフォスフォネート投与は骨基質の形成を促進するが、形成された骨基質の材料特性は低下する

柏井 将文, 橋本 淳, 中野 貴由, 馬越 佑吉, 吉川 秀樹

日本骨代謝学会学術集会プログラム抄録集　Vol. 24回　p. 187-187　2006/07

新たな研究展望--金属間化合物研究から生命科学・医療分野への展開 (特集 インターメタリックスの新たな応用を求めて)

中野 貴由, 乾 晴行

金属　Vol. 76　No. 7　p. 798-804　2006/07

生体硬組織の高分解能イメージベース・マルチスケール・モデリング

山東 篤, 櫛田慶幸, 高野直樹, 安達泰治, 中野貴由, 馬越佑吉, 石本卓也, 榎元孝俊, 山本敏男, 河井まりこ

日本計算工学会誌（Transactions of JSCES）　2006/05　Research paper (scientific journal)

Removing focused ion-beam damages on transmission electron microscopy specimens by using a plasma cleaner

S. Hata, H. Sosiati, N. Kuwano, M. Itakura, T. Nakano, Y. Umakoshi

Journal of Electron Microscopy　Vol. 55　No. 1　p. 23-26　2006/05　Research paper (scientific journal)

Changes of bone quality of cortical bone formed under alendronate treatment were detected by microbeam X-ray diffraction analysis

M. Kashii, J. Hashimoto, T. Nakano, Y. Umakoshi, H. Yoshikawa

Bone　2006/04　Research paper (scientific journal)

大阪大学大学院工学研究科マテリアル生産科学専攻構造機能制御学講座結晶物性工学領域

馬越佑吉, 中野貴由

チタン　2006/04

Martensitic Transformation Behavior and Shape Memory Properties of Ti-Ni-Pt Melt-Spun Ribbons

INAMURA Tomonari, TAKAHASHI Yohei, HOSODA Hideki, WAKASHIMA Kenji, NAGASE Takeshi, NAKANO Takayoshi, UMAKOSHI Yukichi, MIYAZAKI Shuichi

Materials Transactions　Vol. 47　No. 3　p. 540-545　2006/03/20　Research paper (scientific journal)

異方性（ロータス型）ポーラス金属の特性評価試験方法の標準化調査研究

中野貴由

平成17年度（独）新エネルギー・産業技術総合開発機構委託事業成果報告書 (2006)　2006/03　Research paper (bulletin of university, research institution)

536 Mechanical Analysis of Trabecular Bone of Vertebra for Osteoporosis Patients : Computational Analysis by Homogenization Method

ENOKIMOTO Takatoshi, TAKAOKA Kunio, KAWAGAI Mitsuhiro, TAWARA Daisuke, TAKANO Naoki, NAKANO Takayoshi, UMAKOSHI Yukichi, ADACHI Taiji, KOBAYASHI Akio, IWAKI Hiroyoshi

The Proceedings of The Computational Mechanics Conference　Vol. 2006　No. 0　p. 517-518　2006

535 Mechanical Analysis of Trabecular Bone of Vertebra for Osteoporosis Patients : Software Development and Morphology Analysis

TAWARA Daisuke, TAKAOKA Kunio, ADACHI Taiji, TAKANO Naoki, NAKANO Takayoshi, UMAKOSHI Yukichi, KAWAGAI Mitsuhiro, HIRASHITA Hikari, KOBAYASHI Akio, IWAKI Hiroyoshi

The Proceedings of The Computational Mechanics Conference　Vol. 2006　No. 0　p. 515-516　2006

Crystallographic approach to regenerated and pathological hard tissues

T Nakano, T Ishimoto, JW Lee, Y Umakoshi, M Yamamoto, Y Tabata, A Kobayashi, H Iwaki, K Takaoka, M Kawai, T Yamamoto

ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS DESIGN, PROCEEDINGS　Vol. 512　p. 255-260　2006　Research paper (scientific journal)

Microstructure and plastic deformation behavior of Ni-3(Ti,X) (X = Nb,Al) single crystals with long-period geometrically closely packed crystal structures

K. Hagihara, T. Tanaka, H. Fujimoto, T. Nakano, Y. Umakoshi

INTERMETALLICS　Vol. 14　No. 10-11　p. 1332-1338　2006　Research paper (scientific journal)

材料工学的アプローチによる骨質研究

中野 貴由, 馬越 佑吉

生産と技術　Vol. 58　No. 3　p. 47-50　2006

Role of osteoclast in preferential alignment of biological apatite (BAp) in long bones

JW Lee, T Nakano, S Toyosawa, N Ijuhin, Y Tabata, M Yamamoto, Y Umakoshi

ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS DESIGN, PROCEEDINGS　Vol. 512　p. 265-268　2006　Research paper (scientific journal)

Role of stress distribution on healing process of preferential alignment of biological apatite in long bones

T Ishimoto, T Nakano, Y Umakoshi, M Yamamoto, Y Tabata

ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS DESIGN, PROCEEDINGS　Vol. 512　p. 261-264　2006　Research paper (scientific journal)

Plastic deformation behavior of NbSi2/MOSi2 crystals with oriented lamellae

T. Nakano, K. Hagihara, Y. Nakai, Y. Umakoshi

INTERMETALLICS　Vol. 14　No. 10-11　p. 1345-1350　2006　Research paper (scientific journal)

Texture of Biological Apatite Crystallites and the Related Mechanical Function in Regenerated and Pathological Hard Tissues

NAKANO Takayoshi, ISHIMOTO Takuya, UMAKOSHI Yukichi, TABATA Yasuhiko

Journal of hard tissue biology　Vol. 14　No. 4　p. 363-364　2005/12/01

GCP構造を有するDo24型Ni3Ti化合物の転位構造と異常強化挙動

萩原幸司, 中野貴由, 馬越佑吉

特集「電子顕微鏡法による材料開発のための微細構造研究最前線（5）」、まてりあ　2005/12

Texture of Biological Apatite Crystallites and the Related Mechanical Function in Regenerated and Pathological Hard Tissues

T. Nakano, T. Ishimoto, Y. Umakoshi, Y. Tabata

Journal of Hard Tissue Biology, 14 (2)(2005), pp. 253-254, 15(1)(2006), pp. 47-48　2005/12　Research paper (scientific journal)

生体硬組織のイメージベースモデリングと重合メッシュ法によるin vivo応力解析

山東篤, 高野直樹, 中野貴由, 馬越佑吉, 安達泰治, 山本敏男, 河井まりこ, 河貝光寛, 榎元孝俊

日本機械学会M＆M2005材料力学カンファレンス講演論文集　2005/11　Research paper (scientific journal)

Effects of extended pore direction and stress shielding on biological apatite texture as bone quality after insertion of metallic implants with and without pores

T. Nakano, T. Kan, T. Ishimoto, Y. Ohashi, Y. Umakoshi, T. Hattori, Y. Higuchi, M. Tane, H. Nakajima

Porous Metals and Metal Foaming Technology, MetFoam 2005, pp. 51-51　p. 51-54　2005/11

Plastic deformation behavior of Ni-3(Ti0.90Nb0.10) single crystals with the nine-layered ordered rhombohedral structure

K Hagihara, T Tanaka, T Nakano, Y Umakoshi

ACTA MATERIALIA　Vol. 53　No. 19　p. 5051-5059　2005/11　Research paper (scientific journal)

Effects of Al concentration and resulting long-period superstructures on the plastic properties at room temperature of Al-rich TiAl single crystals

T Nakano, K Hayashi, Y Umakoshi, YL Chiu, P Veyssiere

PHILOSOPHICAL MAGAZINE　Vol. 85　No. 22　p. 2527-2548　2005/08　Research paper (scientific journal)

異方性（ロータス型）ポーラス金属の特性評価試験方法の標準化調査研究

中野貴由

平成16年度経済産業省委託事業・新発電システム等調査研究成果報告書（2005）　2005/04　Research paper (bulletin of university, research institution)

微小部X線回折法を用いた再生硬組織の新評価法の開発

中野貴由

(財)島津科学技術振興財団研究成果報告書　2005/04　Research paper (bulletin of university, research institution)

Long-period ordering in a TiAl single crystal with a gradient composition

S Hata, K Shiraishi, M Itakura, N Kuwano, T Nakano, Y Umakoshi

PHILOSOPHICAL MAGAZINE LETTERS　Vol. 85　No. 4　p. 175-184　2005/04　Research paper (scientific journal)

Deformation modes and anomalous strengthening of Ni3X-type intermetallic compounds with the geometrically close-packed structure

Y Umakoshi, K Hagihara, T Nakano

NEW FRONTIERS OF PROCESSING AND ENGINEERING IN ADVANCED MATERIALS　Vol. 502　p. 145-150　2005　Research paper (scientific journal)

P114 Homogenization analysis in consideration of the grain orientation of biological apatite in trabecular bone and measurement by X-ray diffraction

ASAI Mitsuteru, KAWAGAI Mitsuhiro, TAKANO Naoki, NAKANO Takayoshi, UMAKOSHI Yukichi, ADACHI Taiji

Proceedings of the 1992 Annual Meeting of JSME/MMD　Vol. 2005　No. 0　p. 649-650　2005

506 Multi-scale Modeling of Trabecular Bone by Mesh Superposition and Homogenization Methods

TAKANO Naoki, KAWAGAI Mitsuhiro, NAKANO Takayoshi, Umakoshi Yukichi, ISHIMOTO Takuya, ADACHI Taiji

The proceedings of the JSME annual meeting　Vol. 2005　No. 0　p. 11-12　2005

Ordering process and formation of anti-phase boundary in long-period superstructures of Al-rich TiAl single crystals

Takayoshi Nakano, Yosuke Nagasawa, Yukichi Umakoshi, Satoshi Hata, Noriyuki Kuwano, Masaru Itakura, Yoshitsugu Tomokiyo

Solid-Solid Phase Transformations in Inorganic Materials 2005, Vol 1　p. 231-236　2005　Research paper (international conference proceedings)

Crystal structure, phase stability and plastic deformation behavior of Ti-rich Ni-3(Ti,Nb) single crystals with various long-period ordered structures

K Hagihara, T Tanaka, T Nakano, Y Umakoshi

Integrative and Interdisciplinary Aspects of Intermetallics　Vol. 842　p. 91-96　2005　Research paper (international conference proceedings)

Transformation behavior of TiNiPt thin films fabricated using melt spinning technique

T Inamura, Y Takahashi, H Hosoda, K Wakashima, T Nagase, T Nakano, Y Umakoshi, S Miyazaki

Integrative and Interdisciplinary Aspects of Intermetallics　Vol. 842　p. 347-352　2005　Research paper (international conference proceedings)

TEM analysis of long-period superstructures in TiAl single crystal with composition gradient

S Hata, K Shiraishi, N Kuwano, M Itakura, Y Tomokiyo, T Nakano, Y Umakoshi

Integrative and Interdisciplinary Aspects of Intermetallics　Vol. 842　p. 259-264　2005　Research paper (international conference proceedings)

Effects of long-period superstructures on plastic properties in Al-rich TiAl single crystals

T Nakano, K Hayashi, Y Umakoshi

Integrative and Interdisciplinary Aspects of Intermetallics　Vol. 842　p. 253-258　2005　Research paper (international conference proceedings)

Comparison of osteoblast responses to hydroxyapatite and hydroxyapatite/soluble calcium phosphate composites

K.Ogata, S. Imazato, A. Ehara, Y. Kinomoto, S. Ebisu, T. Nakano, Y. Umakoshi

J Biomed Mater Res: Part A, 72A, (2005), 127-135　Vol. 72　p. 127-135　2005/01　Research paper (scientific journal)

Analysis of preferential alignment of biological apatite crystallites in subchondral bone of the osteoarthritic knee

J. -W. Lee, T. Nakano, A. Kobayashi, K. Takaoka, Y. Tabata, Y. Umakoshi

Phosphorus Research Bulletin, 17, (2004),83-84.　2004/12　Research paper (scientific journal)

Effects of applied stress on preferential alignment of biological apatite in rabbit forelimb bones

T.Ishimoto, T.Nakano, Y.Umakoshi, M.Yamamoto, Y.Tabata

Phosphorus Research Bulletin, 17, (2004), 77-82　Vol. 17　p. 77-82　2004/12　Research paper (scientific journal)

海綿骨における生体アパタイト結晶の配向性

中野貴由, 土田裕基, 藤谷 渉, 馬越佑吉, 山本敏男

まてりあ, 43[12], 1032　2004/12

Ni基GCP金属間化合物の積層構造と相安定性

萩原幸司, 田中哲憲, 中野貴由, 馬越佑吉

まてりあ, 43[12], 993　2004/12

Multi-scale biomechanics simulation and visualization for trabecular bone

N. Takano, M. Kawagai, T. Adachi, T. Nakano, T. Ishimoto, Y. Umakoshi, T. Yamamoto

Abstract of International Workshops on Advances in Computational Mechanics (IWACOM)　2004/11

Production of nano-crystal and metallic glass by electron irradiation induced phase transformation.

Takeshi Nagase, Takayoshi Nakano, Hiroyuki Yasuda, Koji Hagihara, Yukichi Umakoshi

2004/10　Research paper (bulletin of university, research institution)

組成傾斜したTiAl単結晶のナノ構造形成－FIBマイクロサンプリング法とTEMによる規則構造解析－

波多聰, 白石康次郎, 板倉賢, 友清芳二, 桑野範之, 中野貴由, 馬越佑吉

Boundary, 19 [10], 22-25　Vol. 20　No. 10　p. 3-5　2004/10

Formation of long-period superstructures in TiAl single crystal with composition-gradient

S. Hata, K. Shiraishi, M. Itakura, Y. Tomokiyo, N. Kuwano, T. Nakano, Y. Umakoshi

Annual Reports. HVEM LAB., Kyushu Univ., No.28　2004/03

骨の力学機能とミネラルの配向

中野貴由, 石本卓也, 李 志旭, 馬越佑吉, 山本雅哉, 田畑泰彦, 小林章郎, 岩城啓好, 高岡邦夫, 山本敏男

バイオレオロジー学会誌, 18[3], 21-31　Vol. 18　No. 3　p. 100-110　2004/03

Indentation fracture behabior of (Mo0.85Nb0.15)Si2 crystals with C40 single phase and MoSi2(C11b)/NbSi2(C40) duplex-phase with oriented lamellae

K. Hagihara, S. Maeda, T. Nakano, Y. Umakoshi

STAM　2004/03　Research paper (scientific journal)

フランスONERA研究所に滞在して

中野 貴由

まてりあ : 日本金属学会会報　Vol. 43　No. 2　p. 159-159　2004/02/20

金属間化合物の変形と強化設計

中野貴由, 馬越佑吉

金属学会セミナー・テキスト、材料強化設計の基礎と応用　2004/02

Formation process of anti-phase boundaries in Al5Ti3 type superstructure studied by Monte Carlo simulation

S. Hata, T. Nakano, K. Higuchi, Y. Nagasawa, M. Itakura, N. Kuwano, Y. Tomokiyo, Y. Umakoshi

Annual Reports. HVEM LAB., Kyushu Univ., No.28　2004/02　Research paper (bulletin of university, research institution)

細胞増殖因子の徐放による骨再生と結晶学的アプローチによる評価

田畑泰彦, 山本雅哉, 中野貴由, 馬越佑吉

日本結晶成長学会誌，Vol.31 [2], 59-68　2004/02

Formation Process of Anti-Phase Boundaries in Al5Ti3 Type Superstructure Studied by Monte Carlo Simulation

S. Hata, T. Nakano, K. Higuchi, Y. Nagasawa, M. Itakura, N. Kuwano, Y. Tomokiyo, Y. Umakoshi

TMS Letters　2004/02

Application of FIB microsampling technique to long-period ordered TiAl single crystal with composition gradient

S Hata, K Shiraishi, M Itakura, N Kuwano, T Nakano, Y Umakoshi

JOURNAL OF ELECTRON MICROSCOPY　Vol. 53　No. 5　p. 537-540　2004　Research paper (scientific journal)

Synthesis of apatite ceramics with preferential crystal orientation

T Nakano, W Fujitani, Y Umakoshi

DESIGNING, PROCESSING AND PROPERTIES OF ADVANCED ENGINEERING MATERIALS, PTS 1 AND 2　Vol. 449-4　p. 1289-1292　2004　Research paper (scientific journal)

HRTEM image contrast and atomistic microstructures of long-period ordered Al-rich TiAl alloys

S Hata, Y Higuchi, T Mitate, M Itakura, Y Tomokiyo, N Kuwano, T Nakano, Y Nagasawa, Y Umakoshi

JOURNAL OF ELECTRON MICROSCOPY　Vol. 53　No. 1　p. 1-9　2004　Research paper (scientific journal)

Osteoblast response to hydroxyapatite/soluble calcium phosphate complexes,

K. Ogata, I. Imazato, A. Ehara, Y. Kinomoto, S. Ebisu, T. Nakano, Y. Umakoshi

Journal of Dental Research, 82, (2003), 420　2003/11　Research paper (scientific journal)

組成傾斜Al-rich TiAl合金における長周期規則相の形成、

白石康二郎, 波多聰, 板倉賢, 友清芳二, 桑野範之, 中野貴由, 馬越佑吉

Annual Reports. HVEM LAB., Kyushu Univ., No.27, (2003), 55-56　2003/11

Anti-phase boundary structure in Al5Ti3 long-period ordered TiAl alloys

S. Hata, T. Nakano, Y. Nagasawa, K. Higuchi, M. Itakura, Y. Tomokiyo, N. Kuwano, Y. Umakoshi

Annual Reports. HVEM LAB., Kyushu Univ, 27, (2003), 7-8　2003/11

電子顕微鏡で見るTiAl金属間化合物のナノ組織形成 －Al5Ti3規則化過程で発見された新しい逆位相境界形成プロセス－

波多 聰, 中野貴由, 樋口 潔, 長澤洋介, 板倉賢, 友清芳二, 桑野範之, 馬越佑吉

Boundary, 19[10], (2003), 22-25　2003/10

Al5Ti3型長周期規則相に注目した先端的新構造材料としてのAl-rich TiAl結晶の変形機構解明

中野貴由

財団法人池谷科学技術振興財団平成14年度年報、Vol.14, (2003), 70　2003/09　Research paper (bulletin of university, research institution)

生体硬組織への結晶学的アプローチ －微小領域Ｘ線回折法ならびにSpring-8放射光施設によって－

中野貴由, 土田裕基, 石本卓也, 藤谷渉, 馬越佑吉, 出口博史, 山本融, 野口真一, 山本雅哉, 川上理, 田畑泰彦, 山本敏男

Boundary, 19[9], (2003), 16-20　2003/09

The dependence of faulted dipole density on load orientation in g-TiAl

Y.-L. Chiu, H. Inui, T. Nakano, P. Veyssiere

Philosophical Magazine Letters, 83 (2003), 485-493　2003/07　Research paper (scientific journal)

材料科学の立場から見た生体硬組織

中野貴由, 馬越佑吉, 田畑泰彦, 山本敏男

「医療・介護福祉材料としての軽金属の現状と展望」（2003）17-24　2003/06

Plastic deformation behaviour in Ni3Ti single crystals with D0(24) structure

K Hagihara, T Nakano, Y Umakoshi

ACTA MATERIALIA　Vol. 51　No. 9　p. 2623-2637　2003/05　Research paper (scientific journal)

Plastic deformation behavior and operative slip systems of ZrSi2 single crystals with the C49 type of structure

T. Nakano, Y. Omomoto, K. Hagihara, Y. Umakoshi

Scripta Materialia, 48 [9] (2003), 1307-1312　2003/04　Research paper (scientific journal)

Plastic deformation behavior of oriented Ni3Sn crystals with D019 structure

K. Hagihara, T. Nakano, Y. Umakoshi

Scripta Materialia 48 (2003), 577-581　2003/04　Research paper (scientific journal)

The nucleation of faulted dipoles at intersection jogs in gamma-TiAl

YL Chiu, F Gregori, T Nakano, Y Umakoshi, P Veyssiere

PHILOSOPHICAL MAGAZINE　Vol. 83　No. 11　p. 1347-1363　2003/04　Research paper (scientific journal)

Slip systems, dislocation structure and plastic deformation behavior of Nl(3)Tl single crystals with D0(24) structure

K Hagihara, T Nakano, Y Umakoshi

THERMEC'2003, PTS 1-5　Vol. 426-4　p. 1709-1714　2003　Research paper (scientific journal)

Semi-quantitative HRTEM for partially ordered materials: Application to Al-rich TiAl alloys

S Hata, T Nakano, K Higuchi, Y Nagasawa, N Kuwano, M Itakura, Y Tomokiyo, Y Umakoshi

THERMEC'2003, PTS 1-5　Vol. 426-4　p. 1721-1726　2003　Research paper (scientific journal)

Selectivity of anti-phase boundary introduced in Al5Ti3 superstructure

T Nakano, Y Nagasawa, Y Umakoshi, S Hata, N Kuwano, M Itakura, Y Tomokiyo

THERMEC'2003, PTS 1-5　Vol. 426-4　p. 1763-1769　2003　Research paper (scientific journal)

Plastic deformation behavior of Ni3X(X Nb, Ti, Sn) type HCP-based intermetallics with the geometrically close-packed structure

K Hagihara, T Nakano, Y Umakoshi

DEFECT PROPERTIES AND RELATED PHENOMENA IN INTERMETALLIC ALLOYS　Vol. 753　p. 357-362　2003　Research paper (international conference proceedings)

Effect of antiphase domain boundaries on prism slip in Ti3Al single crystals

Y Koizumi, Y Minamino, N Tsuji, T Nakano, Y Umakoshi

DEFECT PROPERTIES AND RELATED PHENOMENA IN INTERMETALLIC ALLOYS　Vol. 753　p. 267-272　2003　Research paper (international conference proceedings)

HRTEM observation of partially ordered long-period superstructures in Al-rich TiAl alloys

S Hata, K Higuchi, T Mitate, N Kuwano, M Hakura, Y Tomokiyo, T Nakano, Y Nagasawa, Y Umakoshi

DEFECT PROPERTIES AND RELATED PHENOMENA IN INTERMETALLIC ALLOYS　Vol. 753　p. 175-180　2003　Research paper (international conference proceedings)

Plastic deformation behavior of Al5Ti3 single-phase single crystals

T Nakano, K Hayashi, Y Nagasawa, Y Umakoshi

DEFECT PROPERTIES AND RELATED PHENOMENA IN INTERMETALLIC ALLOYS　Vol. 753　p. 261-266　2003　Research paper (international conference proceedings)

知的好奇心を芽生えさせるための教育とは？

中野貴由

ものづくり教育を考える会会報、日本鉄鋼協会、vol.10, (2003), 31-32　2003/01

Effects of a-TCP and TetCP on MC3T3-E1 proliferation, differentiation and mineralization

A. Ehara, K. Ogata, S. Imazato, S. Ebisu, T. Nakano, Y. Umakoshi

Biomaterials, 24 (2003) 831-836　2003/01　Research paper (scientific journal)

Evaluation of mechanical function through preferential alignment of hydroxyapatite (HAp) in hard tissues regenerated by basic fibroblast growth factor (b-FGF)

T. Nakano, K. Kaibara, T. Ishimoto, Y. Tabata, Y. Umakoshi

Tissue Engineering, 8 [12] (2002) 1232　2002/12　Research paper (scientific journal)

Change in microstructure and solubility improvement of HAp ceramics by heat-treatment in a vacuum

T Nakano, K Kaibara, Y Umakoshi, S Imazato, K Ogata, A Ehara, S Ebisu, M Okazaki

MATERIALS TRANSACTIONS　Vol. 43　No. 12　p. 3105-3111　2002/12　Research paper (scientific journal)

生体硬組織に学ぶ材料設計

中野貴由, 藤谷渉, 土田裕基, 馬越佑吉, 田畑泰彦, 山本敏男

Boundary, 18[10] (2002），pp. 2-7　2002/10

Unique alignment and texture of biological apatite crystallites in typical calcified tissues analyzed by microbeam X-ray diffractometer system

T Nakano, K Kaibara, Y Tabata, N Nagata, S Enomoto, E Marukawa, Y Umakoshi

BONE　Vol. 31　No. 4　p. 479-487　2002/10　Research paper (scientific journal)

Meta-stable region of Al5Ti3 in Time-Temperature-Transformation (TTT) diagram of Ti-62.5at.%Al single crystal

K. Hayashi, T. Nakano, Y. Umakoshi

Intermetallics, 10 (2002), 771-781　2002/10　Research paper (scientific journal)

Effect of Rh and V additions on plastic deformation behaviour in Ni3Nb single crystals with D0(a) structure

K Hagihara, T Nakano, Y Umakoshi

MATERIALS TRANSACTIONS　Vol. 43　No. 9　p. 2267-2274　2002/09　Research paper (scientific journal)

Effects of Components Released from Newly Developed Polyphasic Ceramic on Osteoblast Function

K.Ogata, I.Imazato, A.Ehara, M.Narimatsu, S.Ebisu, T.Nakano, Y.Umakoshi

Journal of Dental Research, 81, p.3455　Vol. 81　p. A426-A426　2002/08

Effects of components released from newly developed polyphasic ceramic on osteoblast function

K. Ogata, I. Imazato, A. Ehara, M. Narimatsu, S. Ebisu, T. Nakano, Y.Umakoshi

Journal of Dental Research, 81, (2002) 3455　2002/08　Research paper (scientific journal)

Tensile deformation and fracture behaviour in NbSi2 and MoSi2 single crystals

T Nakano, M Azuma, Y Umakoshi

ACTA MATERIALIA　Vol. 50　No. 14　p. 3731-3742　2002/08　Research paper (scientific journal)

Al5Ti3長周期規則構造のHRTEM像シミュレーション

樋口潔, 見立壽継, 波多聰, 板倉賢, 友清芳二, 桑野範之, 中野貴由, 馬越佑吉

Annual Reports. HVEM LAB., Kyushu Univ., No.26, (2002), pp.61-62　2002/07

Short range order in Al-rich g-TiAl of Ti-62.5 and 60.0 at.%Al alloys studied by HRTEM with image processing

S. Hata, K. Higuchi, M. Itakura, N. Kuwano, T. Nakano, K. Hayashi, Y. Umakoshi

Philosophical Magazine Letters, 82 [7] (2002), 363-372　2002/07　Research paper (scientific journal)

Ti3Al単結晶の疲労変形微細組織、電子顕微鏡法の実践と応用

中野貴由, 小泉雄一郎, 馬越佑吉

2002/06

Microstructure of duplex-phase NbSi2(C40)/MoSi2(C11(b)) crystals containing a single set of lamellae

T Nakano, Y Nakai, S Maeda, Y Umakoshi

ACTA MATERIALIA　Vol. 50　No. 7　p. 1781-1795　2002/04　Research paper (scientific journal)

Variation in crystallinity of hydroxyapatite and the related calcium phosphates by mechanical grinding and subsequent heat treatment

T Nakano, A Tokumura, Y Umakoshi

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE　Vol. 33　No. 3　p. 521-528　2002/03　Research paper (scientific journal)

Selection and change in deformation mode to maintain continuity of strains and slip/twinning planes at lamellar boundaries in fatigued TiAl polysynthetically twinned crystals

Takayoshi Nakano, Yasuhiro Nakai, Yukichi Umakoshi

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS　Vol. 3　No. 2　p. 225-237　2002/03　Research paper (scientific journal)

Microstructure and compressive flow stress of directionally solidified ternary Ni3(Al, Nb) and quaternary Ni3(Al, Nb, Ti) alloys with duplex phase

K. Hagihara, T. Nakano, Y. Umakoshi

Science and Technology of Advanced Materials, 3 [2] (2002), 193-199　2002/02　Research paper (scientific journal)

Analysis of hydroxyapatite (HAp) texture in regenerated hard tissues using micro-beam X-ray diffractometer technique

T Nakano, K Kaibara, Y Tabata, N Nagata, S Enomoto, E Marukawa, Y Umakoshi

TISSUE ENGINEERING FOR THERAPEUTIC USE 6　Vol. 1243　p. 95-104　2002　Research paper (international conference proceedings)

Formation and stability of transitional long-period superstructures in al-rich ti-al single crystals

T. Nakano, K. Hayashi, Y. Umakoshi

Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties　Vol. 82　No. 4　p. 763-777　2002　Research paper (scientific journal)

Deformation of mineral apatite single crystal and crystallographic evaluation of hydroxyapatite crystallites in biological bones

Y. Umakoshi, T. Nakano, K. Kaibara, Y. Tabata

Proceedings of 5th Asian Symposium on Biomedical Materials (ASBM5)　p. 1-5　2001/12　Research paper (other academic)

Plastic deformation behaviour and deformation substructure in Al-rich TiAl single crystals deformed at high temperatures

K. Hayashi, T. Nakano, Y. Umakoshi

2001/12　Research paper (scientific journal)

Operative slip systems and anomalous strengthening in Ni3Nb single crystals with the D0a structure

Y. Umakoshi, K. Hagihara, T. Nakano

Intermetallics, 9 [10-11] (2001), 955-961　2001/09　Research paper (scientific journal)

再生医学と材料工学の融合～HAp結晶の配向性を利用した生体硬組織の評価

中野貴由, 海原一裕, 馬越佑吉, 田畑泰彦, 長田奈津紀, 洪 流, 榎本昭二, 丸川恵理子

Boundary，Vol.17 [8] (2001), pp.10～13　2001/08

Control of hydroxyapatite crystallinity by mechanical grinding method

T Nakano, A Tokumura, Y Umakoshi, S Imazato, A Ehara, S Ebisu

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE　Vol. 12　No. 8　p. 703-706　2001/08　Research paper (scientific journal)

Plastic deformation behaviour of Ni-based intermetallics single crystals for high-temperature heat-resistance

HAGIHARA Koji, NAKANO Takayoshi, UMAKOSHI Yukichi

Proceedings of MRS Symposium on High-Temperature Ordered Intermetallic Alloys, Vol.~552, pp.~kk.10.7.1-6　Vol. 27　No. 4　2001/07/20

Nanostructure Formation by Short Range Ordering of Al Atoms in Off-stoichiometric g-TiAl

S. Hata, T. Nakano, K. Hayashi, K. Higuchi, M. Itakura, N. Kuwano, Y. Umakoshi

Proceedings of the Forty Sixth Symposium of the Japanese Society of Electron Microscopy in conjunction with the 7th International Symposium on Advanced Physical Fields, 2001, pp.234-237　2001/07　Research paper (international conference proceedings)

Classification of g/g and g/a2 lamellar boundaries on the basis of continuity of strains and slip/twinning planes in fatigued TiAl PST crystals

T. Nakano, H. Biermann, M. Riemer, H. Mughrabi, Y. Nakai, Y. Umakoshi

2001/06　Research paper (scientific journal)

Plastic deformation and operative slip system in mineral fluorapatite single crystals

T. Nakano, T. Awazu, Y. Umakoshi

2001/04　Research paper (scientific journal)

Anomalous strengthening mechanism of NbSi2 single crystals

Y. Umakoshi, T. Nakano, M. Azuma

Mat. Res. Soc. Sympo. Proc., 646 (2001), pp.N2.5.1-N2.5.6　2001/03　Research paper (international conference proceedings)

Deformation twins in Ni3Nb single crystals with DOa structure

K. Hagihara, T. Nakano, Y. Umakoshi

Mat. Res. Soc. Sympo. Proc., 646 (2001), pp.N5.23.1-N5.23.6　2001/03　Research paper (international conference proceedings)

Microstructure and plastic deformation in unidirectionally solidified NbSi2(C40)/ MoSi2(C11b) crystals

T. Nakano, Y. Nakai, Y. Umakoshi

Mat. Res. Soc. Sympo. Proc., 646 (2001), pp.N5.35.1-N5.35.6　2001/03　Research paper (international conference proceedings)

Plastic deformation by slip on (001)[100] in Ni3Nb single crystals with D0a structure

K. Hagihara, T. Nakano, Y. Umakoshi

Materials Transactions　Vol. 42　No. 9　p. 1998-2002　2001　Research paper (scientific journal)

Control of crystallinity and crystal structure in hydroxyapatite and related calcium phosphates by mechanical grinding and subsequent heat-treatment

Y Umakoshi, T Nakano, A Tokumura

PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II　p. 217-220　2001　Research paper (international conference proceedings)

Texture of hydroxyapatite (HAp) crystallites in typical biological hard tissues

T Nakano, K Kaibara, Y Umakoshi, Y Tabata

PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II　p. 225-228　2001　Research paper (international conference proceedings)

Coalescence behavior of the antiphase domain in Ti3Al

Y Koizumi, Y Minamino, T Nakano, Y Umakoshi

DIFFUSIONS IN MATERIALS: DIMAT2000, PTS 1 & 2　Vol. 194-1　p. 577-582　2001　Research paper (scientific journal)

Crystallinity control of hydroxyapatite and the related calcium phosphates by mechanical grinding (MG)

T Nakano, A Tokumura, Y Umakoshi

STRUCTURAL BIOMATERIALS FOR THE 21ST CENTURY　p. 213-220　2001　Research paper (international conference proceedings)

Cyclic deformation behavior of Ni3Nb single crystals deforming by slip on (010)[100]

K. Hagihara, T. Nakano, Y. Umakoshi

Intermetallics　Vol. 9　No. 3　p. 239-244　2001　Research paper (scientific journal)

Deformation Substructure in Ni_3Nb Single Crystals with the D0_a Struntre

HAGIHARA Kouji, NAKANO Takayoshi, UMAKOSHI Yukichi

Materia Japan　Vol. 39　No. 12　p. 996-996　2000/12/20

Deformation microstructure of Ni3Nb single crystals with DOa structure

Koji Hagihara, Takayoshi Nakano, Yukichi Umakoshi

2000/12

Control of Microstructure in Hydroxyapatite for Regenerating Hard Tissues

Takayoshi Nakano, Atsuyuki Tokumura, Satoshi Imazato, Atsushi Ehara, Shigeyuki Ebisu

2000/08　Research paper (other academic)

Effect of substitutational elements on plastic deformation behaviour of NbSi2-based silicide single crystals with C40 structure

T Nakano, M Kishimoto, D Furuta, Y Umakoshi

ACTA MATERIALIA　Vol. 48　No. 13　p. 3465-3475　2000/08　Research paper (scientific journal)

Plastic Deformation Behaviour and Operative Slip Systems in Ni3Nb Single Crystals

K. Hagihara, T. Nakano, Y. Umakoshi

Acta Materialia, 48 (2000), pp.1469-1480　2000/06　Research paper (scientific journal)

Microstructure and Plastic Deformation of Amorphous Fe-Zr-B Alloy Ribbons Containing Nanocrystallines Produced by Melt Spun Method

Yukichi Umakoshi, Takayoshi Nakano, Takashi Tsujimoto, Wataru Fujitani

Scripta Materialia, Vol.~43, No.~4, pp.~349-354　2000/04　Research paper (scientific journal)

Effect of Al2Ti Phase on Plastic Behavior in Ti-62.5at%Al Single Crystals

Takayoshi Nakano, Koutarou Hayashi, Keishi Ashida, Yukichi Umakoshi

Proceedings of MRS Symposium on High-Temperature Ordered Intermetallic Alloys, Vol.~552, pp.~kk.5.9.1-6　1999/09　Research paper (other academic)

Plastic Deformation and Fracture behaviour of Ti3Al Single Crystals Deformed at High Temperatures under Cyclic Loading

Yuichiro Koizumi, Takayoshi Nakano, Yukichi Umakoshi

Acta materialia, Vol.~47, No.~7, pp.~2019-2029　1999/07　Research paper (scientific journal)

Ordering Process of Al5Ti3, h-Al2Ti and r-Al2Ti with Fcc-based Long-period Superstructures in Rapidly Solidified Al-rich TiAl Alloys

Takayoshi Nakano, Atsushi Negishi, Koutarou Hayashi, Yukichi Umakoshi

Acta Materialia, Vol.47, No.4, pp.1091-1104　1999/04　Research paper (scientific journal)

Strength and deformation mechanism of C40-based single crystal and polycrystalline silicides

Y Umakoshi, T Nakano, K Kishimoto, D Furuta, K Hagihara, M Azuma

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING　Vol. 261　No. 1-2　p. 113-121　1999/03　Research paper (scientific journal)

High-temperature deformation in Ti-62.5at.%Al single crystals containing small Al2Ti-type precipitates

Y Umakoshi, T Nakano, K Ashida

TOWARDS INNOVATION IN SUPERPLASTICITY II　Vol. 304-3　p. 163-168　1999　Research paper (scientific journal)

Plastic Deformation Behaviour and Dislocation Structure in Ti3Al Single Crystals Cyclically Deforming by Prism Slip

Takayoshi Nakano, Bunji Ogawa, Yuichiro Koizumi, Yukichi Umakoshi

Acta Materialia, Vol.46, No.12, pp.4311-4324　1998/12　Research paper (scientific journal)

Formation and stability of saturated bundled structure (SBS) in Ti3Al single crystals cyclically deformed by double prism slip

Y Koizumi, T Nakano, Y Umakoshi

ACTA MATERIALIA　Vol. 46　No. 13　p. 4743-4754　1998/08　Research paper (scientific journal)

Cyclic Deformation Behavior of CoTi Single Crystals with the B2 Structure

Seyed Ahmad Behgozin, Takayoshi Nakano, Yukichi Umakoshi

Proceedings of the 3rd Pacific Rim International Conference on Advanced Materials and Processing (PRICM-3), pp.~2323-2330　1998/08　Research paper (scientific journal)

The Role of Dislocations in High-Strain-Rate Superplasticity of Al-Ni-Misch Metal Alloys

Yukichi Umakoshi, Wataru Fujitani, Takayoshi Nakano, Akihisa Inoue, Katsumasa Ohtera, Toshiji Mukai, Kenji Higashi

Acta Materialia, Vol.~46, No.~13, pp.~4469-4478　1998/07　Research paper (scientific journal)

Microstructure and High-Temperature Strength in MoSi2/NbSi2 Duplex Silicides

Takayoshi Nakano, Masatumi Azuma, Yukichi Umakoshi

Intermetallics, Vol.~6, pp.~715-722　1998/06　Research paper (scientific journal)

Dislocation Structure in Ti3Al Single Crystals Cyclically Deformed by Prism Slip

Yukichi Umakoshi, Takayoshi Nakano, Yuichiro Koizumi

1998/05

Mechanical Properties of C40-based Ternary Mo(Si,Al)2 and Quaternary (Mo,Zr)(Si,Al)2 Silicides

Koji Hagihara, Takayoshi Nakano, Yukichi Umakoshi

Scripta Materialia, Vol. 38, No. 3, pp. 471-476　1998/03　Research paper (scientific journal)

Effect of deformation temperature on fatigue and fracture behavior in TiAl polysynthetically twinned crystals

Y Umakoshi, HY Yasuda, T Nakano, K Ikeda

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE　Vol. 29　No. 3A　p. 943-950　1998/03　Research paper (scientific journal)

Stress anomaly in Al-rich Ti-Al single crystals deformed by the motion of 1/2〈110] ordinary dislocations

T. Nakano, K. Hagihara, T. Seno, N. Sumida, M. Yamamoto, Y. Umakoshi

Philosophical Magazine Letters　Vol. 78　No. 5　p. 385-391　1998　Research paper (scientific journal)

Fatigue Behavior and Deformation Substructure of Ti3Al Single Crystals Deformed at High Temperatures

Yukichi Umakoshi, Yuichiro Koizumi, Takayoshi Nakano

Proceedings of International Conference on Thermomechanical Processing of Steels and Other Materials (Thermec'97), Edited by T. Chandra and T. Sakai, pp. 1433-1439　1998/01　Research paper (international conference proceedings)

Cyclic Deformation and Deformation Substructure in CoTi Single Crystal Fatigued at Room Temperature

Ahmad Behgozin, Takayoshi Nakano, Yukichi Umakoshi

1997/12　Research paper (scientific journal)

Effect of alloying elements on anomalous strengthening of NbSi2-based silicides with C40 structure

Y Umakoshi, T Nakano, E Yanagisawa, T Takezoe, A Negishi

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING　Vol. 240　p. 102-108　1997/12　Research paper (scientific journal)

Anomalous behaviour of cyclic deformation and fatigue properties of TiAl PST crystals under constant applied stress

T Nakano, HY Yasuda, N Higashitanaka, Y Umakoshi

ACTA MATERIALIA　Vol. 45　No. 11　p. 4807-4821　1997/11　Research paper (scientific journal)

Fatigue and Fracture Behaviour of TiAl alloys

H. Y. Yasuda, T. Nakano, Y. Umakoshi

Proceedings of Osaka University-University of Nottingham Joint Symposium, pp.140　1997/09　Research paper (international conference proceedings)

Fatigue behaviour and deformation substructure in Ti3Al single crystals

Y. Koizumi, T. Nakano, B. Ogawa, Y. Umakoshi

1997/09

Superstructure in Ordered Phase

Takayoshi Nakano

1997/03

Effect of V and Nh addition on the fatigue behaviour of TiAl polysynthetically twinned crystals

HY Yasuda, T Nakano, J Nakazawa, Y Umakoshi

ISIJ INTERNATIONAL　Vol. 37　No. 12　p. 1210-1217　1997　Research paper (scientific journal)

Superplasticity of MoSi2/NbSi2 duplex silicides

Y Umakoshi, M Kishimoto, W Fujitani, N Furushiro, T Nakano

TOWARDS INNOVATION IN SUPERPLASTICITY I　Vol. 233-2　p. 271-278　1997　Research paper (scientific journal)

Microstructure evolution during high-strain-rate superplastic flow in Al-Ni-misch metal alloy produced from amorphous powders

Y Umakoshi, W Fujitani, T Nakano, A Inoue, K Ohtera, T Mukai, K Higashi

THERMEC '97 - INTERNATIONAL CONFERENCE ON THERMOMECHANICAL PROCESSING OF STEELS AND OTHER MATERIALS, VOLS I-II　p. 1983-1989　1997　Research paper (international conference proceedings)

Effect of Al5T3-type ordering on plastic behavior of Al-rich TiAl single crystals

T Nakano, T Seno, K Hayashi, Y Umakoshi

THERMEC '97 - INTERNATIONAL CONFERENCE ON THERMOMECHANICAL PROCESSING OF STEELS AND OTHER MATERIALS, VOLS I-II　p. 1497-1503　1997　Research paper (international conference proceedings)

Plastic deformation behaviour and substructure in CoTi single crystals fatigued at room temperature

A Behgozin, T Nakano, Y Umakoshi

ISIJ INTERNATIONAL　Vol. 37　No. 12　p. 1218-1223　1997　Research paper (scientific journal)

Deformation behaviour of Intermetallic compounds with high-melting point

Yukichi Umakoshi, Takayoshi Nakano

1996/12

Decomposition of [011] superlattice dislocations in cyclically deformed TiAl polysynthetically twinned crystals

HY Yasuda, T Nakano, Y Umakoshi

PHILOSOPHICAL MAGAZINE LETTERS　Vol. 73　No. 5　p. 225-231　1996/05　Research paper (scientific journal)

Anomalous Strengthening for Prism Slip in Stoichiometric Ti3Al Single Crystals with DO19 Structure below Order-Disorder Transition

Takayoshi Nakano, Yuichiro Koizumi, Takashi Tsujimoto, Yukichi Umakoshi

Intermetallics, Vol.4, pp.571-579　1996/04　Research paper (scientific journal)

Orientation dependence of fracture behavior of Ti3Al single crystals with D0(19) structure

Y Umakoshi, T Nakano, B Ogawa

SCRIPTA MATERIALIA　Vol. 34　No. 7　p. 1161-1169　1996/04　Research paper (scientific journal)

The deformation substructure in cyclically deformed TiAl PST crystals

HY Yasuda, T Nakano, Y Umakoshi

PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES　Vol. 73　No. 4　p. 1035-1051　1996/04　Research paper (scientific journal)

Effect of lamellar structure and plastic anisotropy on the cyclic deformation and fatigue behaviour of TiAl PST crystals

HY Yasuda, T Nakano, Y Umakoshi

PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES　Vol. 73　No. 4　p. 1053-1067　1996/04　Research paper (scientific journal)

Cyclic deformation and fracture of Ti3Al single crystals

Y Umakoshi, T Nakano, B Ogawa, Y Koizumi

DEFORMATION AND FRACTURE OF ORDERED INTERMETALLIC MATERIALS III　p. 17-25　1996　Research paper (international conference proceedings)

Plastic anisotropy and fatigue of TiAl PST crystals: A review

Y Umakoshi, HY Yasuda, T Nakano

INTERMETALLICS　Vol. 4　p. S65-S75　1996　Research paper (scientific journal)

Effect of chemical ordering on the deformation mode of Al-rich Ti-Al single crystals

T. Nakano, K. Matsumoto, T. Seno, K. Oma, Y. Umakoshi

Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties　Vol. 74　No. 1　p. 251-268　1996　Research paper (scientific journal)

Cold-rolling and recovery behaviours of Ti3Al single crystals with D0(19) structure

T Nakano, Y Maeda, Y Umakoshi

ISIJ INTERNATIONAL　Vol. 36　No. 1　p. 111-120　1996　Research paper (scientific journal)

Effect of order-disorder transition on plastic anomaly of Ti3Al single crystals deforming by prism slip

T Nakano, Y Koizumi, T Tsujimoto, Y Umakoshi

INTERMETALLICS　Vol. 4　No. 7　p. 571-579　1996　Research paper (scientific journal)

Fatigue Behavior and Fracture Mechanizm of Intermetallics -- The Role of Lamellar Structure on the Fatigue Behavior of TiAl-PST Crystals --

Hiroyuki Y. Yasuda, Takayoshi Nakano, Yukichi Umakoshi

1996/01

Deformation and Fracture of TiAl PST Crystals under Monotonic and Cyclic Loading

Yukichi Umakoshi, Takayoshi Nakano, Hiroyuki Y. Yasuda

1995/08　Research paper (scientific journal)

Mesoscopic Approach to Mechanical Properties of Intermetallics

Yukichi Umakoshi, Toshiya Shibayanagi, Takayoshi Nakano

Vol. 34　No. 8　p. 964-965　1995/08

High Temperature Deformation of Eutectic CoSi/CoSi2 Alloys Grown by a Floating Zone Method

Yukichi Umakoshi, Takayoshi Nakano, Tadashi Takezoe, Eiichi Yanagisawa

Proceedings of Mechanical Properties and Phase Transformation of Multi-Phase Intermetallic Alloys, pp.171-179　1995/08　Research paper (other academic)

The Role of Lamellar Structure in the Plastic Behavior of TiAl Alloys

Yukichi Umakoshi, Takayoshi Nakano, Hiroyuki Y. Yasuda

1995/08　Research paper (other academic)

EFFECT OF LAMELLAR STRUCTURE ON FRACTURE-BEHAVIOR OF TIAL POLYSYNTHETICALLY TWINNED CRYSTALS

T NAKANO, T KAWANAKA, HY YASUDA, Y UMAKOSHI

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING　Vol. 194　No. 1　p. 43-51　1995/04　Research paper (scientific journal)

Plastic Anisotropy and Fracture Behaviour of Cyclically Deformed TiAl PST Crystals

Y. Umakoshi, H. Y. Yasuda, T. Nakano

Materials Science and Engineering, Vol.A192-193, pp.511　1995/03　Research paper (scientific journal)

EFFECT OF ADDITION OF BETA-PHASE STABILIZING ELEMENTS (NB, MO AND V) ON PLASTIC BEHAVIOR OF TI3AL SINGLE-CRYSTALS WITH THE DO19 STRUCTURE

T NAKANO, E YANAGISAWA, Y UMAKOSHI

ISIJ INTERNATIONAL　Vol. 35　No. 7　p. 900-907　1995　Research paper (scientific journal)

Plastic behavior of TiAl PST crystals under cyclic loading conditions

Y Umakoshi, HY Yasuda, T Nakano, J Nakazawa

GAMMA TITANIUM ALUMINIDES　p. 697-707　1995　Research paper (international conference proceedings)

CYCLIC DEFORMATION-BEHAVIOR OF TI-AL ALLOYS CONTAINING ORIENTED LAMELLAE

HY YASUDA, T NAKANO, Y UMAKOSHI

PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES　Vol. 71　No. 1　p. 127-138　1995/01　Research paper (scientific journal)

Fatigue behaviour of TiAl intermetallic compounds

NAKANO Takayoshi, Hiroyuki Yasuda, Yukichi Umakoshi

1994/09

THE EFFECT OF ORIENTATION AND LAMELLAR STRUCTURE ON THE FATIGUE BEHAVIOUR OF TIAL PST CRYSTALS

Y UMAKOSHI, HY YASUDA, T. NAKANO

STRENGTH OF MATERIALS　p. 345-348　1994　Research paper (international conference proceedings)

PLASTIC BEHAVIOR AND DEFORMATION STRUCTURE OF SILICIDE SINGLE-CRYSTALS WITH TRANSITION-METALS AT HIGH-TEMPERATURES

Y UMAKOSHI, T NAKASHIMA, T NAKANO, E YANAGISAWA

HIGH TEMPERATURE SILICIDES AND REFRACTORY ALLOYS　Vol. 322　p. 9-20　1994　Research paper (international conference proceedings)

EFFECT OF LAMELLAR STRUCTURE ON OXIDATION BEHAVIOR OF TIAL

Y UMAKOSHI, T NAKANO, T SHIBAYANAGI

ADVANCED MATERIALS '93, I - A & B　Vol. 14　No. A & B　p. 229-232　1994　Research paper (international conference proceedings)

EFFECT OF BORON ADDITION ON THE PLASTIC BEHAVIOR OF POLYSYNTHETICALLY TWINNED CRYSTALS OF TIAL

T NAKANO, Y UMAKOSHI

INTERMETALLICS　Vol. 2　No. 3　p. 185-191　1994　Research paper (scientific journal)

EFFECT OF LAMELLAR SPACING ON DEFORMATION-BEHAVIOR OF UNIDIRECTIONALLY SOLIDIFIED, TWIN PHASE TIAL

GH FAIR, JV WOOD, T NAKANO, Y UMAKOSHI

MATERIALS SCIENCE AND TECHNOLOGY　Vol. 10　No. 1　p. 17-21　1994/01　Research paper (scientific journal)

Fracture Behaviour of TiAl Crystals Containing Oriented Lamellae

T. Nakano, K. Kawanaka, H. Y. Yasuda, Y. Umakoshi

Proceedings of 3rd Japan International SAMPE Symposium, pp.1334　1993/12　Research paper (international conference proceedings)

Cyclic Deformation and Fatigue Behaviour of TiAl Crystals Containing Oriented Lamellae

Y. Umakoshi, H. Y. Yasuda, T. Nakano

Proceedings of 3rd Japanese International SAMPE symposium, pp.1329　1993/12　Research paper (international conference proceedings)

Effect of lamellar structure on plastic behaviour of TiAl alloys

Y. Umakoshi, T. Nakano

1993/08

DEFORMATION-BEHAVIOR AND HIGH-TEMPERATURE STABILITY OF UNIDIRECTIONALLY SOLIDIFIED, TWIN PHASE TIAL

GH FAIR, JV WOOD, T NAKANO, Y UMAKOSHI

JOURNAL OF MATERIALS RESEARCH　Vol. 8　No. 8　p. 1812-1816　1993/08　Research paper (scientific journal)

EFFECT OF COMPOSITIONAL DEVIATIONS FROM STOICHIOMETRY ON THE PLASTIC BEHAVIOR OF TI3AL SINGLE-CRYSTALS

T NAKANO, Y UMAKOSHI

JOURNAL OF ALLOYS AND COMPOUNDS　Vol. 197　No. 1　p. 17-20　1993/06　Research paper (scientific journal)

THE ROLE OF ORDERED DOMAINS AND SLIP MODE OF ALPHA-2 PHASE IN THE PLASTIC BEHAVIOR OF TIAL CRYSTALS CONTAINING ORIENTED LAMELLAE

Y UMAKOSHI, T NAKANO

ACTA METALLURGICA ET MATERIALIA　Vol. 41　No. 4　p. 1155-1161　1993/04　Research paper (scientific journal)

ORIENTATION AND TEMPERATURE-DEPENDENCE OF YIELD STRESS AND SLIP GEOMETRY OF TI3AL AND TI3AL-V SINGLE-CRYSTALS

Y UMAKOSHI, T NAKANO, T TAKENAKA, K SUMIMOTO, T YAMANE

ACTA METALLURGICA ET MATERIALIA　Vol. 41　No. 4　p. 1149-1154　1993/04　Research paper (scientific journal)

PLASTIC ANISOTROPY OF TI3AL SINGLE-CRYSTALS

Y UMAKOSHI, T NAKANO, K SUMIMOTO, Y MAEDA

HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS V　Vol. 288　p. 441-446　1993

EFFECT OF NB ADDITION ON THE PLASTIC BEHAVIOR OF TIAL CRYSTALS CONTAINING ORIENTED LAMELLAE

T NAKANO, A YOKOYAMA, Y UMAKOSHI

SCRIPTA METALLURGICA ET MATERIALIA　Vol. 27　No. 10　p. 1253-1258　1992/11　Research paper (scientific journal)

THE EFFECT OF ORIENTATION AND LAMELLAR STRUCTURE ON THE PLASTIC BEHAVIOR OF TIAL CRYSTALS

Y UMAKOSHI, T NAKANO, T YAMANE

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING　Vol. 152　No. 1-2　p. 81-88　1992/05　Research paper (scientific journal)

PLASTIC BEHAVIOR OF TIAL CRYSTALS CONTAINING A SINGLE SET OF LAMELLAE AT HIGH-TEMPERATURES

Y UMAKOSHI, T NAKANO

ISIJ INTERNATIONAL　Vol. 32　No. 12　p. 1339-1347　1992　Research paper (scientific journal)

EFFECT OF THICKNESS AND DISTRIBUTION OF LAMELLAE ON PLASTIC BEHAVIOUR OF TiAl CRYSTALS GROWN BY A FLOATING ZONE METHOD

Y. Umakoshi, T. Nakano, T. Yamane

1991/07　Research paper (international conference proceedings)

CONTRIBUTION OF A SINGLE SET OF LAMELLAE TO THE PLASTIC BEHAVIOR OF TIAL CRYSTALS GROWN BY A FLOATING ZONE METHOD

Y UMAKOSHI, T NAKANO, T YAMANE

SCRIPTA METALLURGICA ET MATERIALIA　Vol. 25　No. 7　p. 1525-1528　1991/07　Research paper (scientific journal)